diplom init

MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/stm32f1xx.h

@@ -0,0 +1,275 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32F1xx Device Peripheral Access Layer Header File. 
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *            - Configuration section that allows to select:
+  *              - The STM32F1xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx
+  * @{
+  */
+    
+#ifndef __STM32F1XX_H
+#define __STM32F1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32F1)
+#define STM32F1
+#endif /* STM32F1 */
+
+/* Uncomment the line below according to the target STM32L device used in your 
+   application 
+  */
+
+#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
+    !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
+    !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
+  /* #define STM32F100xB  */   /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
+  /* #define STM32F100xE */    /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
+  /* #define STM32F101x6  */   /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
+  /* #define STM32F101xB  */   /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
+  /* #define STM32F101xE */    /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ 
+  /* #define STM32F101xG  */   /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
+  /* #define STM32F102x6 */    /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
+  /* #define STM32F102xB  */   /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
+  /* #define STM32F103x6  */   /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
+  /* #define STM32F103xB  */   /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
+  /* #define STM32F103xE */    /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
+  /* #define STM32F103xG  */   /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
+  /* #define STM32F105xC */    /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
+  /* #define STM32F107xC  */   /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */  
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+  
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V4.3.3
+  */
+#define __STM32F1_CMSIS_VERSION_MAIN   (0x04) /*!< [31:24] main version */
+#define __STM32F1_CMSIS_VERSION_SUB1   (0x03) /*!< [23:16] sub1 version */
+#define __STM32F1_CMSIS_VERSION_SUB2   (0x03) /*!< [15:8]  sub2 version */
+#define __STM32F1_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F1_CMSIS_VERSION        ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
+                                       |(__STM32F1_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F100xB)
+  #include "stm32f100xb_matlab.h"
+#elif defined(STM32F100xE)
+  #include "stm32f100xe_matlab.h"
+#elif defined(STM32F101x6)
+  #include "stm32f101x6_matlab.h"
+#elif defined(STM32F101xB)
+  #include "stm32f101xb_matlab.h"
+#elif defined(STM32F101xE)
+  #include "stm32f101xe_matlab.h"
+#elif defined(STM32F101xG)
+  #include "stm32f101xg_matlab.h"
+#elif defined(STM32F102x6)
+  #include "stm32f102x6_matlab.h"
+#elif defined(STM32F102xB)
+  #include "stm32f102xb_matlab.h"
+#elif defined(STM32F103x6)
+  #include "stm32f103x6_matlab.h"
+#elif defined(STM32F103xB)
+  #include "stm32f103xb_matlab.h"
+#elif defined(STM32F103xE)
+  #include "stm32f103xe_matlab.h"
+#elif defined(STM32F103xG)
+  #include "stm32f103xg_matlab.h"
+#elif defined(STM32F105xC)
+  #include "stm32f105xc_matlab.h"
+#elif defined(STM32F107xC)
+  #include "stm32f107xc_matlab.h"
+#else
+ #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */  
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  SUCCESS = 0U,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+/* Use of CMSIS compiler intrinsics for register exclusive access */
+/* Atomic 32-bit register access macro to set one or several bits */
+#define ATOMIC_SET_BIT(REG, BIT)                             \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT);       \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEAR_BIT(REG, BIT)                           \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)                          \
+  do {                                                                     \
+    uint32_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U);               \
+  } while(0)
+
+/* Atomic 16-bit register access macro to set one or several bits */
+#define ATOMIC_SETH_BIT(REG, BIT)                            \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT);       \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEARH_BIT(REG, BIT)                          \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK)                         \
+  do {                                                                     \
+    uint16_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U);               \
+  } while(0)
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F1xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/CMSIS/Device/STM32F1xx/system_stm32f1xx.h

@@ -0,0 +1,98 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f10x.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F10x_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+  * @{
+  */
+
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t  AHBPrescTable[16U];  /*!< AHB prescalers table values */
+extern const uint8_t  APBPrescTable[8U];   /*!< APB prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/CMSIS/arm_defines.h

@@ -0,0 +1,104 @@
+
+#define __disable_irq()
+
+#ifndef   __ASM
+  #define __ASM                                  __asm
+#endif
+
+#ifndef __IO
+  #define __IO                                   volatile
+#endif
+
+#ifndef   __inline
+  #define __inline                               inline
+#endif
+
+#ifndef   __NOINLINE
+#define __NOINLINE                               __declspec(noinline)
+#endif
+
+#ifndef   __INLINE
+  #define __INLINE                               __inline
+#endif
+
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE                        static __inline
+#endif
+
+#ifndef   __STATIC_FORCEINLINE                 
+  #define __STATIC_FORCEINLINE                   static __forceinline
+#endif        
+
+#ifndef   __NO_RETURN
+  #define __NO_RETURN                            __declspec(noreturn)
+#endif
+
+#ifndef   __USED
+  #define __USED                                 __attribute__((used))
+#endif
+
+
+#ifndef   __WEAK
+  #define __WEAK                                 __declspec(selectany)
+//   #define __weak                                 __WEAK
+#endif
+
+#ifndef   __PACKED
+  #define __PACKED                               __attribute__((packed))
+#endif
+
+#ifndef   __PACKED_STRUCT
+  #define __PACKED_STRUCT                        __packed struct
+#endif
+
+#ifndef   __PACKED_UNION
+  #define __PACKED_UNION                         __packed union
+#endif
+
+#ifndef   __UNALIGNED_UINT32        /* deprecated */
+  #define __UNALIGNED_UINT32(x)                  (*((__packed uint32_t *)(x)))
+#endif
+
+#ifndef   __UNALIGNED_UINT16_WRITE
+  #define __UNALIGNED_UINT16_WRITE(addr, val)    ((*((__packed uint16_t *)(addr))) = (val))
+#endif
+
+#ifndef   __UNALIGNED_UINT16_READ
+  #define __UNALIGNED_UINT16_READ(addr)          (*((const __packed uint16_t *)(addr)))
+#endif
+
+#ifndef   __UNALIGNED_UINT32_WRITE
+  #define __UNALIGNED_UINT32_WRITE(addr, val)    ((*((__packed uint32_t *)(addr))) = (val))
+#endif
+
+#ifndef   __UNALIGNED_UINT32_READ
+  #define __UNALIGNED_UINT32_READ(addr)          (*((const __packed uint32_t *)(addr)))
+#endif
+
+#ifndef   __ALIGNED
+  #define __ALIGNED(x)                           __attribute__((aligned(x)))
+#endif
+
+#ifndef   __RESTRICT
+  #define __RESTRICT                             __restrict
+#endif
+
+//#define __CLZ             (uint8_t)clz
+//
+//#define __CTZ             (uint8_t)ctz
+
+#define __CLZ
+#define __CTZ
+#define __RBIT
+
+#ifndef   __weak
+  #define __weak 
+#endif
+#define __DSB()
+#define __ISB()
+#define __NOP()
+#define __WFI()
+#define __SEV()
+#define __WFE()
+#define __DMB()
+

MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm1_matlab.h

@@ -0,0 +1,976 @@
+/**************************************************************************//**
+ * @file     core_cm1.h
+ * @brief    CMSIS Cortex-M1 Core Peripheral Access Layer Header File
+ * @version  V1.0.0
+ * @date     23. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM1_H_GENERIC
+#define __CORE_CM1_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M1
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM1 definitions */
+#define __CM1_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM1_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM1_CMSIS_VERSION       ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM1_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (1U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM1_H_DEPENDANT
+#define __CORE_CM1_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM1_REV
+    #define __CM1_REV               0x0100U
+    #warning "__CM1_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M1 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_ITCMUAEN_Pos            4U                                        /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMUAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos)         /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
+
+#define SCnSCB_ACTLR_ITCMLAEN_Pos            3U                                        /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMLAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos)         /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M1 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M1 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm3_matlab.h

@@ -0,0 +1,1823 @@
+/**************************************************************************//**
+ * @file     core_cm3.h
+ * @brief    CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version  V5.0.8
+ * @date     04. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef __CMSIS_GENERIC
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
+    uint32_t _reserved1:8;               /*!< bit: 16..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[8U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[24U];
+  __IOM uint32_t ICER[8U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[24U];
+  __IOM uint32_t ISPR[8U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[24U];
+  __IOM uint32_t ICPR[8U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[24U];
+  __IOM uint32_t IABR[8U];               /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[56U];
+  __IOM uint8_t  IP[240U];               /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED5[644U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHP[12U];               /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t PFR[2U];                /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t DFR;                    /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ADR;                    /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t MMFR[4U];               /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ISAR[5U];               /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+        uint32_t RESERVED0[5U];
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if defined (__CM3_REV) && (__CM3_REV < 0x0201U)                   /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos               29U                                            /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk               (1UL << SCB_VTOR_TBLBASE_Pos)                  /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0U                                            /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0U                                            /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+#if defined (__CM3_REV) && (__CM3_REV >= 0x200U)
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+#else
+        uint32_t RESERVED1[1U];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2U                                         /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos         1U                                         /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk        (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos)        /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0U                                         /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[6U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8U                                            /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+  __IOM uint32_t MASK0;                  /*!< Offset: 0x024 (R/W)  Mask Register 0 */
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+  __IOM uint32_t MASK1;                  /*!< Offset: 0x034 (R/W)  Mask Register 1 */
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+  __IOM uint32_t MASK2;                  /*!< Offset: 0x044 (R/W)  Mask Register 2 */
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+  __IOM uint32_t MASK3;                  /*!< Offset: 0x054 (R/W)  Mask Register 3 */
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0U                                         /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16U                                         /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12U                                         /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9U                                         /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8U                                         /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7U                                         /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5U                                         /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0U                                         /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __IM  uint32_t FIFO1;                  /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16U                                         /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8U                                         /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0U                                         /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16U                                         /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8U                                         /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0U                                         /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6U                                         /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5U                                         /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register */
+  __IOM uint32_t RASR_A1;                /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register */
+  __IOM uint32_t RASR_A2;                /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register */
+  __IOM uint32_t RASR_A3;                /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   5U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+ /* Memory mapping of Core Hardware */
+#define SCS_BASE_SHIFT            (0x0000E000UL)                            /*!< System Control Space Base Address */
+#define ITM_BASE_SHIFT            (0x00000000UL)                            /*!< ITM Base Address */
+#define DWT_BASE_SHIFT            (0x00001000UL)                            /*!< DWT Base Address */
+#define TPI_BASE_SHIFT            (0x00040000UL)                            /*!< TPI Base Address */
+#define CoreDebug_BASE_SHIFT      (0x0000EDF0UL)                            /*!< Core Debug Base Address */
+
+typedef struct _cortex_memory
+{
+    uint8_t CORTEX_PERIPH_BASE[0xE0100000 - 0xE0000000];
+}MCU_CortexMemoryTypeDef;
+extern MCU_CortexMemoryTypeDef MCU_CORTEX_MEM;
+
+#define SCS_BASE            (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< System Control Space Base Address */
+#define ITM_BASE            (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< ITM Base Address */
+#define DWT_BASE            (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< DWT Base Address */
+#define TPI_BASE            (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< TPI Base Address */
+#define CoreDebug_BASE      (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< Core Debug Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+#define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+#define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+#define FPU_BASE            (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit */
+#define FPU                 ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit */
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+   #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) );               /* Insert write key and priority group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv7.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __CMSIS_GENERIC */

MCU_STM32F1xx_Matlab/Drivers/CMSIS/core_cm4_matlab.h

@@ -0,0 +1,1940 @@
+/************************************************************************
+Данный файл является копией core_cm4.h, только первые ~160 строк, которые
+определяют компилятор АРМ, удалены. 
+МАТЛАБ компилирует через код через комплилятор MSVC для блока S-Function
+Также добавлена структура имитирующая память ядра                   (~1360)
+**************************************************************************/
+#ifndef __CMSIS_GENERIC
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core FPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16U                                            /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16U                                            /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos                    2U                                            /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[8U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[24U];
+  __IOM uint32_t ICER[8U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[24U];
+  __IOM uint32_t ISPR[8U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[24U];
+  __IOM uint32_t ICPR[8U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[24U];
+  __IOM uint32_t IABR[8U];               /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[56U];
+  __IOM uint8_t  IP[240U];               /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED5[644U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHP[12U];               /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t PFR[2U];                /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t DFR;                    /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ADR;                    /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t MMFR[4U];               /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ISAR[5U];               /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+        uint32_t RESERVED0[5U];
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0U                                            /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0U                                            /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MLSPERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 5U)               /*!< SCB CFSR (MMFSR): MLSPERR Position */
+#define SCB_CFSR_MLSPERR_Msk               (1UL << SCB_CFSR_MLSPERR_Pos)                  /*!< SCB CFSR (MMFSR): MLSPERR Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_LSPERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 5U)                  /*!< SCB CFSR (BFSR): LSPERR Position */
+#define SCB_CFSR_LSPERR_Msk               (1UL << SCB_CFSR_LSPERR_Pos)                    /*!< SCB CFSR (BFSR): LSPERR Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos            9U                                         /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk           (1UL << SCnSCB_ACTLR_DISOOFP_Pos)           /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos            8U                                         /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk           (1UL << SCnSCB_ACTLR_DISFPCA_Pos)           /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2U                                         /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos         1U                                         /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk        (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos)        /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0U                                         /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[6U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8U                                            /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+  __IOM uint32_t MASK0;                  /*!< Offset: 0x024 (R/W)  Mask Register 0 */
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+  __IOM uint32_t MASK1;                  /*!< Offset: 0x034 (R/W)  Mask Register 1 */
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+  __IOM uint32_t MASK2;                  /*!< Offset: 0x044 (R/W)  Mask Register 2 */
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+  __IOM uint32_t MASK3;                  /*!< Offset: 0x054 (R/W)  Mask Register 3 */
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0U                                         /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16U                                         /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12U                                         /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9U                                         /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8U                                         /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7U                                         /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5U                                         /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0U                                         /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __IM  uint32_t FIFO1;                  /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16U                                         /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8U                                         /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0U                                         /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16U                                         /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8U                                         /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0U                                         /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6U                                         /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5U                                         /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register */
+  __IOM uint32_t RASR_A1;                /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register */
+  __IOM uint32_t RASR_A2;                /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register */
+  __IOM uint32_t RASR_A3;                /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   5U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+  \brief    Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t FPCCR;                  /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register */
+  __IOM uint32_t FPCAR;                  /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register */
+  __IOM uint32_t FPDSCR;                 /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register */
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos                31U                                            /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30U                                            /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8U                                            /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6U                                            /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5U                                            /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4U                                            /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3U                                            /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1U                                            /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0U                                            /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos               3U                                            /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos                 26U                                            /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25U                                            /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24U                                            /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22U                                            /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28U                                            /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24U                                            /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20U                                            /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16U                                            /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12U                                            /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8U                                            /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4U                                            /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0U                                            /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28U                                            /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24U                                            /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4U                                            /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0U                                            /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE_SHIFT            (0x0000E000UL)                            /*!< System Control Space Base Address */
+#define ITM_BASE_SHIFT            (0x00000000UL)                            /*!< ITM Base Address */
+#define DWT_BASE_SHIFT            (0x00001000UL)                            /*!< DWT Base Address */
+#define TPI_BASE_SHIFT            (0x00040000UL)                            /*!< TPI Base Address */
+#define CoreDebug_BASE_SHIFT      (0x0000EDF0UL)                            /*!< Core Debug Base Address */
+
+typedef struct _cortex_memory
+{
+    uint8_t CORTEX_PERIPH_BASE[0xE0100000 - 0xE0000000];
+}MCU_CortexMemoryTypeDef;
+extern MCU_CortexMemoryTypeDef MCU_CORTEX_MEM;
+
+#define SCS_BASE            (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< System Control Space Base Address */
+#define ITM_BASE            (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< ITM Base Address */
+#define DWT_BASE            (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< DWT Base Address */
+#define TPI_BASE            (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< TPI Base Address */
+#define CoreDebug_BASE      (MCU_CORTEX_MEM.CORTEX_PERIPH_BASE) + SCS_BASE_SHIFT                            /*!< Core Debug Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+#define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+#define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+#define FPU_BASE            (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit */
+#define FPU                 ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit */
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+   #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+#define EXC_RETURN_HANDLER_FPU     (0xFFFFFFE1UL)     /* return to Handler mode, uses MSP after return, restore floating-point state */
+#define EXC_RETURN_THREAD_MSP_FPU  (0xFFFFFFE9UL)     /* return to Thread mode, uses MSP after return, restore floating-point state  */
+#define EXC_RETURN_THREAD_PSP_FPU  (0xFFFFFFEDUL)     /* return to Thread mode, uses PSP after return, restore floating-point state  */
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos)  );              /* Insert write key and priority group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+//#include "mpu_armv7.h"
+
+#endif
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = FPU->MVFR0;
+  if      ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U)
+  {
+    return 1U;           /* Single precision FPU */
+  }
+  else
+  {
+    return 0U;           /* No FPU */
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __CMSIS_GENERIC */

MCU_STM32F1xx_Matlab/Drivers/CMSIS/stdint.h

@@ -0,0 +1,311 @@
+/* Copyright (C) ARM Ltd., 1999,2014 */
+/* All rights reserved */
+
+/*
+ * RCS $Revision$
+ * Checkin $Date$
+ * Revising $Author: agrant $
+ */
+
+#ifndef __stdint_h
+#define __stdint_h
+#define __ARMCLIB_VERSION 6190004
+
+  #ifdef __INT64_TYPE__
+    /* armclang predefines '__INT64_TYPE__' and '__INT64_C_SUFFIX__' */
+    #define __INT64 __INT64_TYPE__
+  #else
+    /* armcc has builtin '__int64' which can be used in --strict mode */
+    #define __INT64 __int64
+    #define __INT64_C_SUFFIX__ ll
+  #endif
+  #define __PASTE2(x, y) x ## y
+  #define __PASTE(x, y) __PASTE2(x, y)
+  #define __INT64_C(x)  __ESCAPE__(__PASTE(x, __INT64_C_SUFFIX__))
+  #define __UINT64_C(x)  __ESCAPE__(__PASTE(x ## u, __INT64_C_SUFFIX__))
+  #if defined(__clang__) || (defined(__ARMCC_VERSION) && !defined(__STRICT_ANSI__))
+    /* armclang and non-strict armcc allow 'long long' in system headers */
+    #define __LONGLONG long long
+  #else
+    /* strict armcc has '__int64' */
+    #define __LONGLONG __int64
+  #endif
+
+  #ifndef __STDINT_DECLS
+  #define __STDINT_DECLS
+
+    #undef __CLIBNS
+
+    #ifdef __cplusplus
+      namespace std {
+          #define __CLIBNS std::
+          extern "C" {
+    #else
+      #define __CLIBNS
+    #endif  /* __cplusplus */
+
+
+/*
+ * 'signed' is redundant below, except for 'signed char' and if
+ * the typedef is used to declare a bitfield.
+ */
+
+    /* 7.18.1.1 */
+
+    /* exact-width signed integer types */
+typedef   signed          char int8_t;
+typedef   signed short     int int16_t;
+typedef   signed           int int32_t;
+typedef   signed       __INT64 int64_t;
+
+    /* exact-width unsigned integer types */
+typedef unsigned          char uint8_t;
+typedef unsigned short     int uint16_t;
+typedef unsigned           int uint32_t;
+typedef unsigned       __INT64 uint64_t;
+
+    /* 7.18.1.2 */
+
+    /* smallest type of at least n bits */
+    /* minimum-width signed integer types */
+typedef   signed          char int_least8_t;
+typedef   signed short     int int_least16_t;
+typedef   signed           int int_least32_t;
+typedef   signed       __INT64 int_least64_t;
+
+    /* minimum-width unsigned integer types */
+typedef unsigned          char uint_least8_t;
+typedef unsigned short     int uint_least16_t;
+typedef unsigned           int uint_least32_t;
+typedef unsigned       __INT64 uint_least64_t;
+
+    /* 7.18.1.3 */
+
+    /* fastest minimum-width signed integer types */
+typedef   signed           int int_fast8_t;
+typedef   signed           int int_fast16_t;
+typedef   signed           int int_fast32_t;
+typedef   signed       __INT64 int_fast64_t;
+
+    /* fastest minimum-width unsigned integer types */
+typedef unsigned           int uint_fast8_t;
+typedef unsigned           int uint_fast16_t;
+typedef unsigned           int uint_fast32_t;
+typedef unsigned       __INT64 uint_fast64_t;
+
+    /* 7.18.1.4 integer types capable of holding object pointers */
+#if __sizeof_ptr == 8
+typedef   signed       __INT64 intptr_t;
+typedef unsigned       __INT64 uintptr_t;
+#else
+typedef   signed           int intptr_t;
+typedef unsigned           int uintptr_t;
+#endif
+
+    /* 7.18.1.5 greatest-width integer types */
+typedef   signed     __LONGLONG intmax_t;
+typedef unsigned     __LONGLONG uintmax_t;
+
+
+#if !defined(__cplusplus) || defined(__USE_C99_ALL) || 201103L <= __cplusplus || defined(__STDC_LIMIT_MACROS)
+
+    /* 7.18.2.1 */
+
+    /* minimum values of exact-width signed integer types */
+#define INT8_MIN                   -128
+#define INT16_MIN                -32768
+#define INT32_MIN          (~0x7fffffff)   /* -2147483648 is unsigned */
+#define INT64_MIN  __INT64_C(~0x7fffffffffffffff) /* -9223372036854775808 is unsigned */
+
+    /* maximum values of exact-width signed integer types */
+#define INT8_MAX                    127
+#define INT16_MAX                 32767
+#define INT32_MAX            2147483647
+#define INT64_MAX  __INT64_C(9223372036854775807)
+
+    /* maximum values of exact-width unsigned integer types */
+#define UINT8_MAX                   255
+#define UINT16_MAX                65535
+#define UINT32_MAX           4294967295u
+#define UINT64_MAX __UINT64_C(18446744073709551615)
+
+    /* 7.18.2.2 */
+
+    /* minimum values of minimum-width signed integer types */
+#define INT_LEAST8_MIN                   -128
+#define INT_LEAST16_MIN                -32768
+#define INT_LEAST32_MIN          (~0x7fffffff)
+#define INT_LEAST64_MIN  __INT64_C(~0x7fffffffffffffff)
+
+    /* maximum values of minimum-width signed integer types */
+#define INT_LEAST8_MAX                    127
+#define INT_LEAST16_MAX                 32767
+#define INT_LEAST32_MAX            2147483647
+#define INT_LEAST64_MAX  __INT64_C(9223372036854775807)
+
+    /* maximum values of minimum-width unsigned integer types */
+#define UINT_LEAST8_MAX                   255
+#define UINT_LEAST16_MAX                65535
+#define UINT_LEAST32_MAX           4294967295u
+#define UINT_LEAST64_MAX __UINT64_C(18446744073709551615)
+
+    /* 7.18.2.3 */
+
+    /* minimum values of fastest minimum-width signed integer types */
+#define INT_FAST8_MIN           (~0x7fffffff)
+#define INT_FAST16_MIN          (~0x7fffffff)
+#define INT_FAST32_MIN          (~0x7fffffff)
+#define INT_FAST64_MIN  __INT64_C(~0x7fffffffffffffff)
+
+    /* maximum values of fastest minimum-width signed integer types */
+#define INT_FAST8_MAX             2147483647
+#define INT_FAST16_MAX            2147483647
+#define INT_FAST32_MAX            2147483647
+#define INT_FAST64_MAX  __INT64_C(9223372036854775807)
+
+    /* maximum values of fastest minimum-width unsigned integer types */
+#define UINT_FAST8_MAX            4294967295u
+#define UINT_FAST16_MAX           4294967295u
+#define UINT_FAST32_MAX           4294967295u
+#define UINT_FAST64_MAX __UINT64_C(18446744073709551615)
+
+    /* 7.18.2.4 */
+
+    /* minimum value of pointer-holding signed integer type */
+#if __sizeof_ptr == 8
+#define INTPTR_MIN INT64_MIN
+#else
+#define INTPTR_MIN INT32_MIN
+#endif
+
+    /* maximum value of pointer-holding signed integer type */
+#if __sizeof_ptr == 8
+#define INTPTR_MAX INT64_MAX
+#else
+#define INTPTR_MAX INT32_MAX
+#endif
+
+    /* maximum value of pointer-holding unsigned integer type */
+#if __sizeof_ptr == 8
+#define UINTPTR_MAX UINT64_MAX
+#else
+#define UINTPTR_MAX UINT32_MAX
+#endif
+
+    /* 7.18.2.5 */
+
+    /* minimum value of greatest-width signed integer type */
+#define INTMAX_MIN  __ESCAPE__(~0x7fffffffffffffffll)
+
+    /* maximum value of greatest-width signed integer type */
+#define INTMAX_MAX  __ESCAPE__(9223372036854775807ll)
+
+    /* maximum value of greatest-width unsigned integer type */
+#define UINTMAX_MAX __ESCAPE__(18446744073709551615ull)
+
+    /* 7.18.3 */
+
+    /* limits of ptrdiff_t */
+#if __sizeof_ptr == 8
+#define PTRDIFF_MIN INT64_MIN
+#define PTRDIFF_MAX INT64_MAX
+#else
+#define PTRDIFF_MIN INT32_MIN
+#define PTRDIFF_MAX INT32_MAX
+#endif
+
+    /* limits of sig_atomic_t */
+#define SIG_ATOMIC_MIN (~0x7fffffff)
+#define SIG_ATOMIC_MAX   2147483647
+
+    /* limit of size_t */
+#if __sizeof_ptr == 8
+#define SIZE_MAX UINT64_MAX
+#else
+#define SIZE_MAX UINT32_MAX
+#endif
+
+    /* limits of wchar_t */
+    /* NB we have to undef and redef because they're defined in both
+     * stdint.h and wchar.h */
+#undef WCHAR_MIN
+#undef WCHAR_MAX
+
+#if defined(__WCHAR32) || (defined(__ARM_SIZEOF_WCHAR_T) && __ARM_SIZEOF_WCHAR_T == 4)
+  #define WCHAR_MIN   0
+  #define WCHAR_MAX   0xffffffffU
+#else
+  #define WCHAR_MIN   0
+  #define WCHAR_MAX   65535
+#endif
+
+    /* limits of wint_t */
+#define WINT_MIN (~0x7fffffff)
+#define WINT_MAX 2147483647
+
+#endif /* __STDC_LIMIT_MACROS */
+
+#if !defined(__cplusplus) || defined(__USE_C99_ALL) || 201103L <= __cplusplus || defined(__STDC_CONSTANT_MACROS)
+
+    /* 7.18.4.1 macros for minimum-width integer constants */
+#define INT8_C(x)   (x)
+#define INT16_C(x)  (x)
+#define INT32_C(x)  (x)
+#define INT64_C(x)  __INT64_C(x)
+
+#define UINT8_C(x)  (x ## u)
+#define UINT16_C(x) (x ## u)
+#define UINT32_C(x) (x ## u)
+#define UINT64_C(x) __UINT64_C(x)
+
+    /* 7.18.4.2 macros for greatest-width integer constants */
+#define INTMAX_C(x)  __ESCAPE__(x ## ll)
+#define UINTMAX_C(x) __ESCAPE__(x ## ull)
+
+#endif /* __STDC_CONSTANT_MACROS */
+
+    #ifdef __cplusplus
+         }  /* extern "C" */
+      }  /* namespace std */
+    #endif /* __cplusplus */
+  #endif /* __STDINT_DECLS */
+
+  #ifdef __cplusplus
+    #ifndef __STDINT_NO_EXPORTS
+      using ::std::int8_t;
+      using ::std::int16_t;
+      using ::std::int32_t;
+      using ::std::int64_t;
+      using ::std::uint8_t;
+      using ::std::uint16_t;
+      using ::std::uint32_t;
+      using ::std::uint64_t;
+      using ::std::int_least8_t;
+      using ::std::int_least16_t;
+      using ::std::int_least32_t;
+      using ::std::int_least64_t;
+      using ::std::uint_least8_t;
+      using ::std::uint_least16_t;
+      using ::std::uint_least32_t;
+      using ::std::uint_least64_t;
+      using ::std::int_fast8_t;
+      using ::std::int_fast16_t;
+      using ::std::int_fast32_t;
+      using ::std::int_fast64_t;
+      using ::std::uint_fast8_t;
+      using ::std::uint_fast16_t;
+      using ::std::uint_fast32_t;
+      using ::std::uint_fast64_t;
+      using ::std::intptr_t;
+      using ::std::uintptr_t;
+      using ::std::intmax_t;
+      using ::std::uintmax_t;
+    #endif
+  #endif /* __cplusplus */
+
+#undef __INT64
+#undef __LONGLONG
+
+#endif /* __stdint_h */
+
+/* end of stdint.h */

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -0,0 +1,3783 @@
+/**
+  ******************************************************************************
+  * @file    stm32_hal_legacy.h
+  * @author  MCD Application Team
+  * @brief   This file contains aliases definition for the STM32Cube HAL constants
+  *          macros and functions maintained for legacy purpose.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32_HAL_LEGACY
+#define STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define AES_FLAG_RDERR                  CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR                  CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF               CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR             CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR             CRYP_CLEARFLAG_WRERR
+/**
+  * @}
+  */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define ADC_RESOLUTION12b               ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b               ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b                ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b                ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN            ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED              ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV                 ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV                    ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV             ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP                   ADC_REGULAR_GROUP
+#define INJECTED_GROUP                  ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP          ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT                       ADC_AWD_EVENT
+#define AWD1_EVENT                      ADC_AWD1_EVENT
+#define AWD2_EVENT                      ADC_AWD2_EVENT
+#define AWD3_EVENT                      ADC_AWD3_EVENT
+#define OVR_EVENT                       ADC_OVR_EVENT
+#define JQOVF_EVENT                     ADC_JQOVF_EVENT
+#define ALL_CHANNELS                    ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS                ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS               ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC          ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC            ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1    ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2    ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4    ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6    ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8    ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO       ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2       ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO       ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4        ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO      ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11      ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC                 ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE      ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING    ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING   ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5         ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG          HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ          HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG           HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ           HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR             HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY              HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD               HAL_ADC_STATE_AWD1
+
+#if defined(STM32H7)
+#define ADC_CHANNEL_VBAT_DIV4           ADC_CHANNEL_VBAT
+#endif /* STM32H7 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define COMP_WINDOWMODE_DISABLED       COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED        COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT     COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT     COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT     COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT     COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT     COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT     COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT     COMP_EXTI_LINE_COMP7
+#if defined(STM32L0)
+#define COMP_LPTIMCONNECTION_ENABLED   ((uint32_t)0x00000003U)    /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */
+#endif
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR  COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1            COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR       COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE         COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1      COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2      COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3      COMP_INPUT_PLUS_IO3
+#define COMP_NONINVERTINGINPUT_IO4      COMP_INPUT_PLUS_IO4
+#define COMP_NONINVERTINGINPUT_IO5      COMP_INPUT_PLUS_IO5
+#define COMP_NONINVERTINGINPUT_IO6      COMP_INPUT_PLUS_IO6
+
+#define COMP_INVERTINGINPUT_1_4VREFINT  COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT  COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT  COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT     COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1    COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2    COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1        COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2        COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1         COMP_INPUT_MINUS_IO1
+#if defined(STM32L0)
+/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2),     */
+/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding   */
+/* to the second dedicated IO (only for COMP2).                               */
+#define COMP_INVERTINGINPUT_IO2         COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO3         COMP_INPUT_MINUS_IO2
+#else
+#define COMP_INVERTINGINPUT_IO2         COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3         COMP_INPUT_MINUS_IO3
+#endif
+#define COMP_INVERTINGINPUT_IO4         COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5         COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW            COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH           COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose.                    */
+/*       To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()".        */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK                 COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK                 COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK                 COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5        COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3        COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3        COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4        COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5        COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1       COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE           COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED              COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED               COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED              COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED            COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER               COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER          COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED    CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED     CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define DAC1_CHANNEL_1                                  DAC_CHANNEL_1
+#define DAC1_CHANNEL_2                                  DAC_CHANNEL_2
+#define DAC2_CHANNEL_1                                  DAC_CHANNEL_1
+#define DAC_WAVE_NONE                                   0x00000000U
+#define DAC_WAVE_NOISE                                  DAC_CR_WAVE1_0
+#define DAC_WAVE_TRIANGLE                               DAC_CR_WAVE1_1
+#define DAC_WAVEGENERATION_NONE                         DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE                        DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE                     DAC_WAVE_TRIANGLE
+
+#if defined(STM32G4) || defined(STM32H7)
+#define DAC_CHIPCONNECT_DISABLE       DAC_CHIPCONNECT_EXTERNAL
+#define DAC_CHIPCONNECT_ENABLE        DAC_CHIPCONNECT_INTERNAL
+#endif
+
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4)
+#define HAL_DAC_MSP_INIT_CB_ID       HAL_DAC_MSPINIT_CB_ID
+#define HAL_DAC_MSP_DEINIT_CB_ID     HAL_DAC_MSPDEINIT_CB_ID
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_REMAPDMA_ADC_DMA_CH2                DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4          DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5          DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4              DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2              DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32            DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6              DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7              DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67              DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67            DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_I2C1_DMA_CH76              DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6               DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7               DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6               DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA                          IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE            __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE           __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+#if defined(STM32L4)
+
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI0            HAL_DMAMUX1_REQ_GEN_EXTI0
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI1            HAL_DMAMUX1_REQ_GEN_EXTI1
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI2            HAL_DMAMUX1_REQ_GEN_EXTI2
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI3            HAL_DMAMUX1_REQ_GEN_EXTI3
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI4            HAL_DMAMUX1_REQ_GEN_EXTI4
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI5            HAL_DMAMUX1_REQ_GEN_EXTI5
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI6            HAL_DMAMUX1_REQ_GEN_EXTI6
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI7            HAL_DMAMUX1_REQ_GEN_EXTI7
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI8            HAL_DMAMUX1_REQ_GEN_EXTI8
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI9            HAL_DMAMUX1_REQ_GEN_EXTI9
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI10           HAL_DMAMUX1_REQ_GEN_EXTI10
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI11           HAL_DMAMUX1_REQ_GEN_EXTI11
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI12           HAL_DMAMUX1_REQ_GEN_EXTI12
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI13           HAL_DMAMUX1_REQ_GEN_EXTI13
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI14           HAL_DMAMUX1_REQ_GEN_EXTI14
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI15           HAL_DMAMUX1_REQ_GEN_EXTI15
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT       HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT       HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE           HAL_DMAMUX1_REQ_GEN_DSI_TE
+#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT          HAL_DMAMUX1_REQ_GEN_DSI_EOT
+#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT        HAL_DMAMUX1_REQ_GEN_DMA2D_EOT
+#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT          HAL_DMAMUX1_REQ_GEN_LTDC_IT
+
+#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT          HAL_DMAMUX_REQ_GEN_NO_EVENT
+#define HAL_DMAMUX_REQUEST_GEN_RISING            HAL_DMAMUX_REQ_GEN_RISING
+#define HAL_DMAMUX_REQUEST_GEN_FALLING           HAL_DMAMUX_REQ_GEN_FALLING
+#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING    HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define DMA_REQUEST_DCMI_PSSI                    DMA_REQUEST_DCMI
+#endif
+
+#endif /* STM32L4 */
+
+#if defined(STM32G0)
+#define DMA_REQUEST_DAC1_CHANNEL1                DMA_REQUEST_DAC1_CH1
+#define DMA_REQUEST_DAC1_CHANNEL2                DMA_REQUEST_DAC1_CH2
+#define DMA_REQUEST_TIM16_TRIG_COM               DMA_REQUEST_TIM16_COM
+#define DMA_REQUEST_TIM17_TRIG_COM               DMA_REQUEST_TIM17_COM
+
+#define LL_DMAMUX_REQ_TIM16_TRIG_COM             LL_DMAMUX_REQ_TIM16_COM
+#define LL_DMAMUX_REQ_TIM17_TRIG_COM             LL_DMAMUX_REQ_TIM17_COM
+#endif
+
+#if defined(STM32H7)
+
+#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1
+#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2
+
+#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX
+#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX
+
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI0              HAL_DMAMUX1_REQ_GEN_EXTI0
+#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO         HAL_DMAMUX1_REQ_GEN_TIM12_TRGO
+
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP    HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP    HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT         HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT         HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP          HAL_DMAMUX2_REQ_GEN_I2C4_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP          HAL_DMAMUX2_REQ_GEN_SPI6_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT          HAL_DMAMUX2_REQ_GEN_COMP1_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT          HAL_DMAMUX2_REQ_GEN_COMP2_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP           HAL_DMAMUX2_REQ_GEN_RTC_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_EXTI0              HAL_DMAMUX2_REQ_GEN_EXTI0
+#define HAL_DMAMUX2_REQUEST_GEN_EXTI2              HAL_DMAMUX2_REQ_GEN_EXTI2
+#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT        HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT            HAL_DMAMUX2_REQ_GEN_SPI6_IT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT      HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT      HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT
+#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT            HAL_DMAMUX2_REQ_GEN_ADC3_IT
+#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT      HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT        HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT
+#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT        HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT
+
+#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT            HAL_DMAMUX_REQ_GEN_NO_EVENT
+#define HAL_DMAMUX_REQUEST_GEN_RISING              HAL_DMAMUX_REQ_GEN_RISING
+#define HAL_DMAMUX_REQUEST_GEN_FALLING             HAL_DMAMUX_REQ_GEN_FALLING
+#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING      HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+#define DFSDM_FILTER_EXT_TRIG_LPTIM1               DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT
+#define DFSDM_FILTER_EXT_TRIG_LPTIM2               DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT
+#define DFSDM_FILTER_EXT_TRIG_LPTIM3               DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT
+
+#define DAC_TRIGGER_LP1_OUT                        DAC_TRIGGER_LPTIM1_OUT
+#define DAC_TRIGGER_LP2_OUT                        DAC_TRIGGER_LPTIM2_OUT
+
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define TYPEPROGRAM_BYTE              FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD          FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD              FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD        FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS             FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES               FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE           FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE           FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE              OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE               OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE       FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP                    OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG               OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE            OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE             OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE            FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD        FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD            FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE          FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD      FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD          FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE      FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD  FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD      FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE                      FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE          FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD      FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD          FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1               FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2               FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3               FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4               FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST              FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST     FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA           OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB           OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA           OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB           OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE             OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE             OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE              OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE              OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE              HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD                HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG                HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP               HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP               HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV              HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR           HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG              HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP                HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA               HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE              HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ               HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS               HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS               HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST              HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR            HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO           HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION         HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS               HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW                     OB_IWDG_SW
+#define OB_WDG_HW                     OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET    OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET  OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET       OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET     OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR     IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0                 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1                 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2                 OB_RDP_LEVEL_2
+#if defined(STM32G0)
+#define OB_BOOT_LOCK_DISABLE          OB_BOOT_ENTRY_FORCED_NONE
+#define OB_BOOT_LOCK_ENABLE           OB_BOOT_ENTRY_FORCED_FLASH
+#else
+#define OB_BOOT_ENTRY_FORCED_NONE     OB_BOOT_LOCK_DISABLE
+#define OB_BOOT_ENTRY_FORCED_FLASH    OB_BOOT_LOCK_ENABLE
+#endif
+#if defined(STM32H7)
+#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
+#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
+#define FLASH_FLAG_STRBER_BANK1R  FLASH_FLAG_STRBERR_BANK1
+#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
+#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
+#define FLASH_FLAG_STRBER_BANK2R  FLASH_FLAG_STRBERR_BANK2
+#define FLASH_FLAG_WDW            FLASH_FLAG_WBNE
+#define OB_WRP_SECTOR_All         OB_WRP_SECTOR_ALL
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#if defined(STM32H7)
+#define __HAL_RCC_JPEG_CLK_ENABLE               __HAL_RCC_JPGDECEN_CLK_ENABLE
+#define __HAL_RCC_JPEG_CLK_DISABLE              __HAL_RCC_JPGDECEN_CLK_DISABLE
+#define __HAL_RCC_JPEG_FORCE_RESET              __HAL_RCC_JPGDECRST_FORCE_RESET
+#define __HAL_RCC_JPEG_RELEASE_RESET            __HAL_RCC_JPGDECRST_RELEASE_RESET
+#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE         __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE
+#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE        __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9    I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10   I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6    I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7    I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8    I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9    I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1       I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2       I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3       I2C_FASTMODEPLUS_I2C3
+#if defined(STM32G4)
+
+#define HAL_SYSCFG_EnableIOAnalogSwitchBooster    HAL_SYSCFG_EnableIOSwitchBooster
+#define HAL_SYSCFG_DisableIOAnalogSwitchBooster   HAL_SYSCFG_DisableIOSwitchBooster
+#define HAL_SYSCFG_EnableIOAnalogSwitchVDD        HAL_SYSCFG_EnableIOSwitchVDD
+#define HAL_SYSCFG_DisableIOAnalogSwitchVDD       HAL_SYSCFG_DisableIOSwitchVDD
+#endif /* STM32G4 */
+/**
+  * @}
+  */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+  * @{
+  */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE       FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE        FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8            FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16           FMC_NAND_MEM_BUS_WIDTH_16
+#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4)
+#define FMC_NAND_WAIT_FEATURE_DISABLE           FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE            FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8                FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16               FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define FSMC_NORSRAM_TYPEDEF                      FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF             FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+  * @}
+  */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define GET_GPIO_SOURCE                           GPIO_GET_INDEX
+#define GET_GPIO_INDEX                            GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1                          GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO                            GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO                            GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32H7)
+#define GPIO_AF7_SDIO1                            GPIO_AF7_SDMMC1
+#define GPIO_AF8_SDIO1                            GPIO_AF8_SDMMC1
+#define GPIO_AF12_SDIO1                           GPIO_AF12_SDMMC1
+#define GPIO_AF9_SDIO2                            GPIO_AF9_SDMMC2
+#define GPIO_AF10_SDIO2                           GPIO_AF10_SDMMC2
+#define GPIO_AF11_SDIO2                           GPIO_AF11_SDMMC2
+
+#if defined (STM32H743xx) || defined (STM32H753xx)  || defined (STM32H750xx) || defined (STM32H742xx) || \
+    defined (STM32H745xx) || defined (STM32H755xx)  || defined (STM32H747xx) || defined (STM32H757xx)
+#define GPIO_AF10_OTG2_HS  GPIO_AF10_OTG2_FS
+#define GPIO_AF10_OTG1_FS  GPIO_AF10_OTG1_HS
+#define GPIO_AF12_OTG2_FS  GPIO_AF12_OTG1_FS
+#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */
+#endif /* STM32H7 */
+
+#define GPIO_AF0_LPTIM                            GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM                            GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM                            GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7)
+#define  GPIO_SPEED_LOW                           GPIO_SPEED_FREQ_LOW
+#define  GPIO_SPEED_MEDIUM                        GPIO_SPEED_FREQ_MEDIUM
+#define  GPIO_SPEED_FAST                          GPIO_SPEED_FREQ_HIGH
+#define  GPIO_SPEED_HIGH                          GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/
+
+#if defined(STM32L1)
+ #define  GPIO_SPEED_VERY_LOW    GPIO_SPEED_FREQ_LOW
+ #define  GPIO_SPEED_LOW         GPIO_SPEED_FREQ_MEDIUM
+ #define  GPIO_SPEED_MEDIUM      GPIO_SPEED_FREQ_HIGH
+ #define  GPIO_SPEED_HIGH        GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define  GPIO_SPEED_LOW    GPIO_SPEED_FREQ_LOW
+ #define  GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define  GPIO_SPEED_HIGH   GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM                            GPIO_AF6_DFSDM1
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED           HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68     HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79     HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter        __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter        __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod         __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod         __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare        __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare        __HAL_HRTIM_GETCOMPARE
+
+#if defined(STM32G4)
+#define HAL_HRTIM_ExternalEventCounterConfig    HAL_HRTIM_ExtEventCounterConfig
+#define HAL_HRTIM_ExternalEventCounterEnable    HAL_HRTIM_ExtEventCounterEnable
+#define HAL_HRTIM_ExternalEventCounterDisable   HAL_HRTIM_ExtEventCounterDisable
+#define HAL_HRTIM_ExternalEventCounterReset     HAL_HRTIM_ExtEventCounterReset
+#define HRTIM_TIMEEVENT_A                       HRTIM_EVENTCOUNTER_A
+#define HRTIM_TIMEEVENT_B                       HRTIM_EVENTCOUNTER_B
+#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL  HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL
+#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL    HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL
+#endif /* STM32G4 */
+
+#if defined(STM32H7)
+#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9
+
+#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9
+#endif /* STM32H7 */
+
+#if defined(STM32F3)
+/** @brief Constants defining available sources associated to external events.
+  */
+#define HRTIM_EVENTSRC_1              (0x00000000U)
+#define HRTIM_EVENTSRC_2              (HRTIM_EECR1_EE1SRC_0)
+#define HRTIM_EVENTSRC_3              (HRTIM_EECR1_EE1SRC_1)
+#define HRTIM_EVENTSRC_4              (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0)
+
+/** @brief Constants defining the events that can be selected to configure the
+  *        set/reset crossbar of a timer output
+  */
+#define HRTIM_OUTPUTSET_TIMEV_1       (HRTIM_SET1R_TIMEVNT1)
+#define HRTIM_OUTPUTSET_TIMEV_2       (HRTIM_SET1R_TIMEVNT2)
+#define HRTIM_OUTPUTSET_TIMEV_3       (HRTIM_SET1R_TIMEVNT3)
+#define HRTIM_OUTPUTSET_TIMEV_4       (HRTIM_SET1R_TIMEVNT4)
+#define HRTIM_OUTPUTSET_TIMEV_5       (HRTIM_SET1R_TIMEVNT5)
+#define HRTIM_OUTPUTSET_TIMEV_6       (HRTIM_SET1R_TIMEVNT6)
+#define HRTIM_OUTPUTSET_TIMEV_7       (HRTIM_SET1R_TIMEVNT7)
+#define HRTIM_OUTPUTSET_TIMEV_8       (HRTIM_SET1R_TIMEVNT8)
+#define HRTIM_OUTPUTSET_TIMEV_9       (HRTIM_SET1R_TIMEVNT9)
+
+#define HRTIM_OUTPUTRESET_TIMEV_1     (HRTIM_RST1R_TIMEVNT1)
+#define HRTIM_OUTPUTRESET_TIMEV_2     (HRTIM_RST1R_TIMEVNT2)
+#define HRTIM_OUTPUTRESET_TIMEV_3     (HRTIM_RST1R_TIMEVNT3)
+#define HRTIM_OUTPUTRESET_TIMEV_4     (HRTIM_RST1R_TIMEVNT4)
+#define HRTIM_OUTPUTRESET_TIMEV_5     (HRTIM_RST1R_TIMEVNT5)
+#define HRTIM_OUTPUTRESET_TIMEV_6     (HRTIM_RST1R_TIMEVNT6)
+#define HRTIM_OUTPUTRESET_TIMEV_7     (HRTIM_RST1R_TIMEVNT7)
+#define HRTIM_OUTPUTRESET_TIMEV_8     (HRTIM_RST1R_TIMEVNT8)
+#define HRTIM_OUTPUTRESET_TIMEV_9     (HRTIM_RST1R_TIMEVNT9)
+
+/** @brief Constants defining the event filtering applied to external events
+  *        by a timer
+  */
+#define HRTIM_TIMEVENTFILTER_NONE             (0x00000000U)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1     (HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2     (HRTIM_EEFR1_EE1FLTR_1)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3     (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4     (HRTIM_EEFR1_EE1FLTR_2)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4    (HRTIM_EEFR1_EE1FLTR_3)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2)
+#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
+#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM     (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
+
+/** @brief Constants defining the DLL calibration periods (in micro seconds)
+  */
+#define HRTIM_CALIBRATIONRATE_7300             0x00000000U
+#define HRTIM_CALIBRATIONRATE_910              (HRTIM_DLLCR_CALRTE_0)
+#define HRTIM_CALIBRATIONRATE_114              (HRTIM_DLLCR_CALRTE_1)
+#define HRTIM_CALIBRATIONRATE_14               (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0)
+
+#endif /* STM32F3 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLED                I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED                 I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED                I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED                 I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED                  I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED                   I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED                I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED               I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX               HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX               HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX            HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX            HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX             HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX             HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED            IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED             IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define KR_KEY_RELOAD                   IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE                   IWDG_KEY_ENABLE
+#define KR_KEY_EWA                      IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA                      IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE          LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE         LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES           LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION  LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS      LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS      LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS      LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION        LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION        LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION        LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_NAND_Read_Page              HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page             HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea         HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea        HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef             NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS                 ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE                ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE                ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE                ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE                ADDR_4TH_CYCLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define NOR_StatusTypedef              HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS                    HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING                    HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR                      HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT                    HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE                    NOR_WRITE
+#define __NOR_ADDR_SHIFT               NOR_ADDR_SHIFT
+/**
+  * @}
+  */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define OPAMP_NONINVERTINGINPUT_VP0           OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1           OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2           OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3           OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0       OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1       OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2       OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3       OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0              OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1              OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0             OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1             OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0          OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1          OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM             OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO                   OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4)
+#define HAL_OPAMP_MSP_INIT_CB_ID       HAL_OPAMP_MSPINIT_CB_ID
+#define HAL_OPAMP_MSP_DEINIT_CB_ID     HAL_OPAMP_MSPDEINIT_CB_ID
+#endif
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define I2S_STANDARD_PHILLIPS      I2S_STANDARD_PHILIPS
+
+#if defined(STM32H7)
+  #define I2S_IT_TXE               I2S_IT_TXP
+  #define I2S_IT_RXNE              I2S_IT_RXP
+
+  #define I2S_FLAG_TXE             I2S_FLAG_TXP
+  #define I2S_FLAG_RXNE            I2S_FLAG_RXP
+#endif
+
+#if defined(STM32F7)
+  #define I2S_CLOCK_SYSCLK           I2S_CLOCK_PLL
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA                       ATA_DATA
+#define CF_SECTOR_COUNT               ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER              ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW               ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH              ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD                  ATA_CARD_HEAD
+#define CF_STATUS_CMD                 ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE       ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA           ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD            ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD           ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD           ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD               ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef          HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS                HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING                HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR                  HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT                HAL_PCCARD_STATUS_TIMEOUT
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define FORMAT_BIN                  RTC_FORMAT_BIN
+#define FORMAT_BCD                  RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None     RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_DISABLED  RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED    RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED     RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED     RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED      RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED   RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT         RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT       RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13  RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1   RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13  RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14  RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2   RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0  RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8  RTC_TAMPERPIN_POS1
+
+#if defined(STM32H7)
+#define RTC_TAMPCR_TAMPXE          RTC_TAMPER_X
+#define RTC_TAMPCR_TAMPXIE         RTC_TAMPER_X_INTERRUPT
+
+#define RTC_TAMPER1_INTERRUPT      RTC_IT_TAMP1
+#define RTC_TAMPER2_INTERRUPT      RTC_IT_TAMP2
+#define RTC_TAMPER3_INTERRUPT      RTC_IT_TAMP3
+#define RTC_ALL_TAMPER_INTERRUPT   RTC_IT_TAMPALL
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SMARTCARD_NACK_ENABLED                  SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED                 SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED      SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED       SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE       SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE        SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED              SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED               SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED              SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED               SMARTCARD_LASTBIT_ENABLE
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SMBUS_DUALADDRESS_DISABLED      SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED       SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED      SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED       SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED        SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED         SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED      SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED     SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED              SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED               SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN    HAL_SMBUS_STATE_LISTEN
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SPI_TIMODE_DISABLED             SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED              SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED     SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED      SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED          SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED           SPI_NSS_PULSE_ENABLE
+
+#if defined(STM32H7)
+
+ #define SPI_FLAG_TXE                    SPI_FLAG_TXP
+ #define SPI_FLAG_RXNE                   SPI_FLAG_RXP
+
+ #define SPI_IT_TXE                      SPI_IT_TXP
+ #define SPI_IT_RXNE                     SPI_IT_RXP
+
+ #define SPI_FRLVL_EMPTY                 SPI_RX_FIFO_0PACKET
+ #define SPI_FRLVL_QUARTER_FULL          SPI_RX_FIFO_1PACKET
+ #define SPI_FRLVL_HALF_FULL             SPI_RX_FIFO_2PACKET
+ #define SPI_FRLVL_FULL                  SPI_RX_FIFO_3PACKET
+
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CCER_CCxE_MASK                   TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK                  TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1                  TIM_DMABASE_CR1
+#define TIM_DMABase_CR2                  TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR                 TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER                 TIM_DMABASE_DIER
+#define TIM_DMABase_SR                   TIM_DMABASE_SR
+#define TIM_DMABase_EGR                  TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1                TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2                TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER                 TIM_DMABASE_CCER
+#define TIM_DMABase_CNT                  TIM_DMABASE_CNT
+#define TIM_DMABase_PSC                  TIM_DMABASE_PSC
+#define TIM_DMABase_ARR                  TIM_DMABASE_ARR
+#define TIM_DMABase_RCR                  TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1                 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2                 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3                 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4                 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR                 TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR                  TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR                 TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1                  TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3                TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5                 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6                 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2                  TIM_DMABASE_OR2
+#define TIM_DMABase_OR3                  TIM_DMABASE_OR3
+#define TIM_DMABase_OR                   TIM_DMABASE_OR
+
+#define TIM_EventSource_Update           TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1              TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2              TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3              TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4              TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM              TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger          TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break            TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2           TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer     TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers    TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers    TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers    TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers    TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers    TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers    TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers    TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers    TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers   TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers   TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers   TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers   TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers   TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers   TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers   TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers   TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers   TIM_DMABURSTLENGTH_18TRANSFERS
+
+#if defined(STM32L0)
+#define TIM22_TI1_GPIO1   TIM22_TI1_GPIO
+#define TIM22_TI1_GPIO2   TIM22_TI1_GPIO
+#endif
+
+#if defined(STM32F3)
+#define IS_TIM_HALL_INTERFACE_INSTANCE   IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE
+#endif
+
+#if defined(STM32H7)
+#define TIM_TIM1_ETR_COMP1_OUT        TIM_TIM1_ETR_COMP1
+#define TIM_TIM1_ETR_COMP2_OUT        TIM_TIM1_ETR_COMP2
+#define TIM_TIM8_ETR_COMP1_OUT        TIM_TIM8_ETR_COMP1
+#define TIM_TIM8_ETR_COMP2_OUT        TIM_TIM8_ETR_COMP2
+#define TIM_TIM2_ETR_COMP1_OUT        TIM_TIM2_ETR_COMP1
+#define TIM_TIM2_ETR_COMP2_OUT        TIM_TIM2_ETR_COMP2
+#define TIM_TIM3_ETR_COMP1_OUT        TIM_TIM3_ETR_COMP1
+#define TIM_TIM1_TI1_COMP1_OUT        TIM_TIM1_TI1_COMP1
+#define TIM_TIM8_TI1_COMP2_OUT        TIM_TIM8_TI1_COMP2
+#define TIM_TIM2_TI4_COMP1_OUT        TIM_TIM2_TI4_COMP1
+#define TIM_TIM2_TI4_COMP2_OUT        TIM_TIM2_TI4_COMP2
+#define TIM_TIM2_TI4_COMP1COMP2_OUT   TIM_TIM2_TI4_COMP1_COMP2
+#define TIM_TIM3_TI1_COMP1_OUT        TIM_TIM3_TI1_COMP1
+#define TIM_TIM3_TI1_COMP2_OUT        TIM_TIM3_TI1_COMP2
+#define TIM_TIM3_TI1_COMP1COMP2_OUT   TIM_TIM3_TI1_COMP1_COMP2
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define TSC_SYNC_POL_FALL        TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH   TSC_SYNC_POLARITY_RISING
+/**
+  * @}
+  */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define UART_ONEBIT_SAMPLING_DISABLED   UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED    UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED    UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED     UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE        __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE       __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16                UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16            UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16            UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16           UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8                 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8             UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8             UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8            UART_BRR_SAMPLING8
+
+#define __DIV_LPUART                    UART_DIV_LPUART
+
+#define UART_WAKEUPMETHODE_IDLELINE     UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK  UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define USART_CLOCK_DISABLED            USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED             USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED               USART_NACK_ENABLE
+#define USARTNACK_DISABLED              USART_NACK_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CFR_BASE                    WWDG_CFR_BASE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CAN_FilterFIFO0             CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1             CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0                CAN_IT_TME
+#define CAN_IT_RQCP1                CAN_IT_TME
+#define CAN_IT_RQCP2                CAN_IT_TME
+#define INAK_TIMEOUT                CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT                CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED         ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK             ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING        ((uint8_t)0x02U)
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define VLAN_TAG                ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD         ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD         ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD     ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK        ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK        ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK       ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK       ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR              0x00000100U
+#define ETH_MMCRIR             0x00000104U
+#define ETH_MMCTIR             0x00000108U
+#define ETH_MMCRIMR            0x0000010CU
+#define ETH_MMCTIMR            0x00000110U
+#define ETH_MMCTGFSCCR         0x0000014CU
+#define ETH_MMCTGFMSCCR        0x00000150U
+#define ETH_MMCTGFCR           0x00000168U
+#define ETH_MMCRFCECR          0x00000194U
+#define ETH_MMCRFAECR          0x00000198U
+#define ETH_MMCRGUFCR          0x000001C4U
+
+#define ETH_MAC_TXFIFO_FULL                             0x02000000U  /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY                         0x01000000U  /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE                     0x00400000U  /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE                             0x00000000U  /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ                             0x00100000U  /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING                          0x00200000U  /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING                          0x00300000U  /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE                      0x00080000U  /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE            0x00000000U  /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING         0x00020000U  /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF   0x00040000U  /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING    0x00060000U  /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE           0x00010000U  /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY                  0x00000000U  /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD        0x00000100U  /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD        0x00000200U  /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL                   0x00000300U  /* Rx FIFO fill level: full */
+#if defined(STM32F1)
+#else
+#define ETH_MAC_READCONTROLLER_IDLE           0x00000000U  /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA   0x00000020U  /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U  /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#endif
+#define ETH_MAC_READCONTROLLER_FLUSHING       0x00000060U  /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE           0x00000010U  /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE          0x00000000U  /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE        0x00000002U  /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE       0x00000004U  /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE          0x00000006U  /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE   0x00000001U  /* MAC MII receive protocol engine active */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_DCMI_ERROR_OVF      HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF             DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI         DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI         DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP     HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP     HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP    HAL_DCMI_DisableCrop
+
+/**
+  * @}
+  */
+
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \
+  || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \
+  || defined(STM32H7)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define DMA2D_ARGB8888          DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888            DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565            DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555          DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444          DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888             DMA2D_INPUT_ARGB8888
+#define CM_RGB888               DMA2D_INPUT_RGB888
+#define CM_RGB565               DMA2D_INPUT_RGB565
+#define CM_ARGB1555             DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444             DMA2D_INPUT_ARGB4444
+#define CM_L8                   DMA2D_INPUT_L8
+#define CM_AL44                 DMA2D_INPUT_AL44
+#define CM_AL88                 DMA2D_INPUT_AL88
+#define CM_L4                   DMA2D_INPUT_L4
+#define CM_A8                   DMA2D_INPUT_A8
+#define CM_A4                   DMA2D_INPUT_A4
+/**
+  * @}
+  */
+#endif  /* STM32L4 ||  STM32F7 ||  STM32F4 ||  STM32H7 */
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_CRYP_ComputationCpltCallback     HAL_CRYPEx_ComputationCpltCallback
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_HASH_STATETypeDef        HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef         HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish          HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish         HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish       HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish       HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1      HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224    HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256    HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5       HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH         HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC         HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey  HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey   HASH_HMAC_KEYTYPE_LONGKEY
+
+#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
+
+#define HAL_HASH_MD5_Accumulate                HAL_HASH_MD5_Accmlt
+#define HAL_HASH_MD5_Accumulate_End            HAL_HASH_MD5_Accmlt_End
+#define HAL_HASH_MD5_Accumulate_IT             HAL_HASH_MD5_Accmlt_IT
+#define HAL_HASH_MD5_Accumulate_End_IT         HAL_HASH_MD5_Accmlt_End_IT
+
+#define HAL_HASH_SHA1_Accumulate               HAL_HASH_SHA1_Accmlt
+#define HAL_HASH_SHA1_Accumulate_End           HAL_HASH_SHA1_Accmlt_End
+#define HAL_HASH_SHA1_Accumulate_IT            HAL_HASH_SHA1_Accmlt_IT
+#define HAL_HASH_SHA1_Accumulate_End_IT        HAL_HASH_SHA1_Accmlt_End_IT
+
+#define HAL_HASHEx_SHA224_Accumulate           HAL_HASHEx_SHA224_Accmlt
+#define HAL_HASHEx_SHA224_Accumulate_End       HAL_HASHEx_SHA224_Accmlt_End
+#define HAL_HASHEx_SHA224_Accumulate_IT        HAL_HASHEx_SHA224_Accmlt_IT
+#define HAL_HASHEx_SHA224_Accumulate_End_IT    HAL_HASHEx_SHA224_Accmlt_End_IT
+
+#define HAL_HASHEx_SHA256_Accumulate           HAL_HASHEx_SHA256_Accmlt
+#define HAL_HASHEx_SHA256_Accumulate_End       HAL_HASHEx_SHA256_Accmlt_End
+#define HAL_HASHEx_SHA256_Accumulate_IT        HAL_HASHEx_SHA256_Accmlt_IT
+#define HAL_HASHEx_SHA256_Accumulate_End_IT    HAL_HASHEx_SHA256_Accmlt_End_IT
+
+#endif  /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect  HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd)  (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ?  HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
+#define HAL_EnableSRDomainDBGStopMode      HAL_EnableDomain3DBGStopMode
+#define HAL_DisableSRDomainDBGStopMode     HAL_DisableDomain3DBGStopMode
+#define HAL_EnableSRDomainDBGStandbyMode   HAL_EnableDomain3DBGStandbyMode
+#define HAL_DisableSRDomainDBGStandbyMode  HAL_DisableDomain3DBGStandbyMode
+#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ  || STM32H7B0xxQ */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define FLASH_HalfPageProgram      HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown   HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown  HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock   HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock     HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase    HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program  HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_I2CEx_AnalogFilter_Config         HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config        HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config      HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config     HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1)
+#define HAL_I2C_Master_Sequential_Transmit_IT  HAL_I2C_Master_Seq_Transmit_IT
+#define HAL_I2C_Master_Sequential_Receive_IT   HAL_I2C_Master_Seq_Receive_IT
+#define HAL_I2C_Slave_Sequential_Transmit_IT   HAL_I2C_Slave_Seq_Transmit_IT
+#define HAL_I2C_Slave_Sequential_Receive_IT    HAL_I2C_Slave_Seq_Receive_IT
+#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1)
+#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA
+#define HAL_I2C_Master_Sequential_Receive_DMA  HAL_I2C_Master_Seq_Receive_DMA
+#define HAL_I2C_Slave_Sequential_Transmit_DMA  HAL_I2C_Slave_Seq_Transmit_DMA
+#define HAL_I2C_Slave_Sequential_Receive_DMA   HAL_I2C_Slave_Seq_Receive_DMA
+#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */
+
+#if defined(STM32F4)
+#define HAL_FMPI2C_Master_Sequential_Transmit_IT  HAL_FMPI2C_Master_Seq_Transmit_IT
+#define HAL_FMPI2C_Master_Sequential_Receive_IT   HAL_FMPI2C_Master_Seq_Receive_IT
+#define HAL_FMPI2C_Slave_Sequential_Transmit_IT   HAL_FMPI2C_Slave_Seq_Transmit_IT
+#define HAL_FMPI2C_Slave_Sequential_Receive_IT    HAL_FMPI2C_Slave_Seq_Receive_IT
+#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA
+#define HAL_FMPI2C_Master_Sequential_Receive_DMA  HAL_FMPI2C_Master_Seq_Receive_DMA
+#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA  HAL_FMPI2C_Slave_Seq_Transmit_DMA
+#define HAL_FMPI2C_Slave_Sequential_Receive_DMA   HAL_FMPI2C_Slave_Seq_Receive_DMA
+#endif /* STM32F4 */
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+  * @{
+  */
+
+#if defined(STM32G0)
+#define HAL_PWR_ConfigPVD                             HAL_PWREx_ConfigPVD
+#define HAL_PWR_EnablePVD                             HAL_PWREx_EnablePVD
+#define HAL_PWR_DisablePVD                            HAL_PWREx_DisablePVD
+#define HAL_PWR_PVD_IRQHandler                        HAL_PWREx_PVD_IRQHandler
+#endif
+#define HAL_PWR_PVDConfig                             HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg                        HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown                 HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor                  HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg                         HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown                  HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor                   HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler                    HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig                        HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler              HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback                 HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive                   HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive                 HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog                  HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog                   HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig                           HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL                               PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING                            PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING                           PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING                    PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING                         PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING                        PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING                 PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB                                  PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB                                 PWR_CSR_OFFSET_BB
+#define PMODE_BIT_NUMBER                              VOS_BIT_NUMBER
+#define CR_PMODE_BB                                   CR_VOS_BB
+
+#define DBP_BitNumber                                 DBP_BIT_NUMBER
+#define PVDE_BitNumber                                PVDE_BIT_NUMBER
+#define PMODE_BitNumber                               PMODE_BIT_NUMBER
+#define EWUP_BitNumber                                EWUP_BIT_NUMBER
+#define FPDS_BitNumber                                FPDS_BIT_NUMBER
+#define ODEN_BitNumber                                ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber                              ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber                              MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber                              LPLVDS_BIT_NUMBER
+#define BRE_BitNumber                                 BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT                                  PWR_PVD_MODE_NORMAL
+
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_SMBUS_Slave_Listen_IT          HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback        HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback  HAL_SMBUS_ListenCpltCallback
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_SPI_FlushRxFifo                HAL_SPIEx_FlushRxFifo
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_TIM_DMADelayPulseCplt                       TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError                                TIM_DMAError
+#define HAL_TIM_DMACaptureCplt                          TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt                    TIMEx_DMACommutationCplt
+#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4)
+#define HAL_TIM_SlaveConfigSynchronization              HAL_TIM_SlaveConfigSynchro
+#define HAL_TIM_SlaveConfigSynchronization_IT           HAL_TIM_SlaveConfigSynchro_IT
+#define HAL_TIMEx_CommutationCallback                   HAL_TIMEx_CommutCallback
+#define HAL_TIMEx_ConfigCommutationEvent                HAL_TIMEx_ConfigCommutEvent
+#define HAL_TIMEx_ConfigCommutationEvent_IT             HAL_TIMEx_ConfigCommutEvent_IT
+#define HAL_TIMEx_ConfigCommutationEvent_DMA            HAL_TIMEx_ConfigCommutEvent_DMA
+#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+#define HAL_LTDC_Relaod           HAL_LTDC_Reload
+#define HAL_LTDC_StructInitFromVideoConfig  HAL_LTDCEx_StructInitFromVideoConfig
+#define HAL_LTDC_StructInitFromAdaptedCommandConfig  HAL_LTDCEx_StructInitFromAdaptedCommandConfig
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define AES_IT_CC                      CRYP_IT_CC
+#define AES_IT_ERR                     CRYP_IT_ERR
+#define AES_FLAG_CCF                   CRYP_FLAG_CCF
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_GET_BOOT_MODE                   __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH               __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH         __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM                __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC                 __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM           __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC                __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI             __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK                        __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG                        __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG                      __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE              __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE             __HAL_SYSCFG_VREFINT_OUT_DISABLE
+#define __HAL_SYSCFG_SRAM2_WRP_ENABLE         __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE
+
+#define SYSCFG_FLAG_VREF_READY                SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48                      RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG         IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber                    UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber                      CMP_PD_BIT_NUMBER
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __ADC_ENABLE                                     __HAL_ADC_ENABLE
+#define __ADC_DISABLE                                    __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS                    ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS                   ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED                             ADC_IS_ENABLE
+#define __ADC_IS_ENABLED                                 ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR              ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED             ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR          ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED         ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING                  ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE                        ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION                         ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK                                ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH                            ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR                           ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION            ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE              ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS             ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS                ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM                 ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT                          ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS                        ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN                           ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ                        ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL                            ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL                           ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL                            ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL                         ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET                       ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET                       ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD                      ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION                ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION         ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION        ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER                        ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI                       ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED                   ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED                       ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER        ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER                       ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE                            ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L                                 ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL                                ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL                             ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM                  ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN                               ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE                   ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE                  ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER                    ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1                                   ADC_SQR1
+#define __HAL_ADC_SMPR1                                  ADC_SMPR1
+#define __HAL_ADC_SMPR2                                  ADC_SMPR2
+#define __HAL_ADC_SQR3_RK                                ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK                                ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK                                ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS                         ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS                      ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV                           ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection                       ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq                         ADC_CR2_DMAContReq
+#define __HAL_ADC_JSQR                                   ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL                         ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS               ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF                          ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT                         ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS                       ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN                          ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR                          ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ                       ADC_CFGR1_DMACONTREQ
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_DHR12R1_ALIGNEMENT                        DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT                        DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT                        DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE                            IS_DAC_WAVE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#if defined(STM32H7)
+  #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
+  #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
+  #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
+  #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
+#else
+  #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+  #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+  #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+  #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#endif /* STM32H7 */
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined(STM32F3)
+#define COMP_START                                       __HAL_COMP_ENABLE
+#define COMP_STOP                                        __HAL_COMP_DISABLE
+#define COMP_LOCK                                        __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE  COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro             */
+/*       is COMP_FLAG_LOCK.                                                   */
+/*       This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle  */
+/*       argument.                                                            */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__)  (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+  * @}
+  */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_COMP_Start_IT       HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT        HAL_COMP_Stop  /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+  * @}
+  */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+                          ((WAVE) == DAC_WAVE_NOISE)|| \
+                          ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_WRPAREA          IS_OB_WRPAREA
+#define IS_TYPEPROGRAM      IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE        IS_FLASH_TYPEERASE
+#define IS_NBSECTORS        IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE    IS_OB_IWDG_SOURCE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_I2C_RESET_CR2             I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START        I2C_GENERATE_START
+#if defined(STM32F1)
+#define __HAL_I2C_FREQ_RANGE            I2C_FREQRANGE
+#else
+#define __HAL_I2C_FREQ_RANGE            I2C_FREQ_RANGE
+#endif /* STM32F1 */
+#define __HAL_I2C_RISE_TIME             I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD        I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST            I2C_SPEED_FAST
+#define __HAL_I2C_SPEED                 I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE        I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ         I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS         I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE    I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ     I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB           I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB           I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE             I2C_FREQRANGE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_I2S_INSTANCE                 IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT             IS_I2S_ALL_INSTANCE_EXT
+
+#if defined(STM32H7)
+  #define __HAL_I2S_CLEAR_FREFLAG       __HAL_I2S_CLEAR_TIFREFLAG
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __IRDA_DISABLE                  __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE                   __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE       IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION     IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE           IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION         IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE           IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS  IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT    __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT   __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS        __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __OPAMP_CSR_OPAXPD                OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX                OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX                OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX                OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX                OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L             OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H             OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM               OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES          OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX              OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT            OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION  OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET           OPAMP_OFFSET_TRIM_SET
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_PVD_EVENT_DISABLE                                  __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE                                   __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE                    __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE                     __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE                     __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE                      __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE                                  __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE                                   __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE                    __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE                     __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE                     __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE                      __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE                         HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE                          HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE                    HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE                     HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER()                  do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE                         __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE                          __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE                __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE                 __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE                 __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE                  __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER              __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER               __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE()                                  do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE()                                   do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE                  HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE                   HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE                                 HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE                                  HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER                 __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER           __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE                                 HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE                                  HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD)         __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD)        __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD)          __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD)        __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD)     __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG                                __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT                                __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT                                 __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT                             __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG                                  __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+  * @{
+  */
+
+#define RCC_StopWakeUpClock_MSI     RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI     RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE          __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE           __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE    __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE     __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET          __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET        __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE         __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE          __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET         __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET       __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE    __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE   __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE         __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE          __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE      __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE  __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE  __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE  __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET       __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET  __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE         __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE          __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET         __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET       __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE        __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE         __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET        __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET      __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE   __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE  __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE     __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE     __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET    __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET  __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE       __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE        __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET       __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET     __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE  __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+
+#if defined(STM32WB)
+#define __HAL_RCC_QSPI_CLK_DISABLE            __HAL_RCC_QUADSPI_CLK_DISABLE
+#define __HAL_RCC_QSPI_CLK_ENABLE             __HAL_RCC_QUADSPI_CLK_ENABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE      __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE       __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_QSPI_FORCE_RESET            __HAL_RCC_QUADSPI_FORCE_RESET
+#define __HAL_RCC_QSPI_RELEASE_RESET          __HAL_RCC_QUADSPI_RELEASE_RESET
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED         __HAL_RCC_QUADSPI_IS_CLK_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED        __HAL_RCC_QUADSPI_IS_CLK_DISABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED   __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED  __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED
+#define QSPI_IRQHandler QUADSPI_IRQHandler
+#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */
+
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE        __HAL_RCC_UART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE         __HAL_RCC_UART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE   __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE  __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET        __HAL_RCC_UART4_FORCE_RESET
+#define __USART4_RELEASE_RESET      __HAL_RCC_UART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE        __HAL_RCC_UART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE         __HAL_RCC_UART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE   __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE  __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET        __HAL_RCC_UART5_FORCE_RESET
+#define __USART5_RELEASE_RESET      __HAL_RCC_UART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE        __HAL_RCC_UART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE         __HAL_RCC_UART7_CLK_ENABLE
+#define __USART7_FORCE_RESET        __HAL_RCC_UART7_FORCE_RESET
+#define __USART7_RELEASE_RESET      __HAL_RCC_UART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE        __HAL_RCC_UART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE         __HAL_RCC_UART8_CLK_ENABLE
+#define __USART8_FORCE_RESET        __HAL_RCC_UART8_FORCE_RESET
+#define __USART8_RELEASE_RESET      __HAL_RCC_UART8_RELEASE_RESET
+#define __USB_CLK_DISABLE         __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE          __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET         __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE    __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE   __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+
+#if defined(STM32H7)
+#define __HAL_RCC_WWDG_CLK_DISABLE   __HAL_RCC_WWDG1_CLK_DISABLE
+#define __HAL_RCC_WWDG_CLK_ENABLE   __HAL_RCC_WWDG1_CLK_ENABLE
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE  __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE  __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE
+
+#define __HAL_RCC_WWDG_FORCE_RESET    ((void)0U)  /* Not available on the STM32H7*/
+#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/
+
+
+#define  __HAL_RCC_WWDG_IS_CLK_ENABLED    __HAL_RCC_WWDG1_IS_CLK_ENABLED
+#define  __HAL_RCC_WWDG_IS_CLK_DISABLED  __HAL_RCC_WWDG1_IS_CLK_DISABLED
+#endif
+
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+
+#define __TIM21_CLK_ENABLE   __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE   __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET   __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET  __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE   __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE   __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE   __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE   __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET   __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET  __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE   __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE   __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET  __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET  __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE          __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE          __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE  __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE  __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE  __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE  __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE  __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE          __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE          __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE          __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET          __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET          __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE          __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE  __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE            __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE          __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE              __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET          __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET          __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE          __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE  __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE          __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE          __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET          __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET         __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE          __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE  __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE          __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE          __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET          __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET          __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE          __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE  __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE  __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE  __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE  __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE  __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE  __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE          __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE          __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE  __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE  __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE  __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE  __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE          __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE          __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET        __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET        __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE  __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE  __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE          __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE          __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET          __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET        __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE   __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE  __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE          __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE          __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET          __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET          __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE          __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE          __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET         __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET          __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE          __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE          __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET          __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE          __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE          __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE          __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE          __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET          __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET          __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE   __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE  __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE          __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE          __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET       __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET       __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE  __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE  __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE          __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE          __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET          __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET          __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE  __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE  __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET          __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET          __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET          __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET          __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE      __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE     __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED  __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __SRAM3_CLK_SLEEP_ENABLE       __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE        __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE       __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE         __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE        __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE        __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE       __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE        __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE       __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET             __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET           __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE        __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE       __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET             __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET           __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE       __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE        __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE             __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE            __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET            __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET          __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE       __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE      __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET    __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET  __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE          __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE         __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE          __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE         __HAL_RCC_ADC34_CLK_DISABLE
+#define __DAC2_CLK_ENABLE           __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE          __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE          __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE         __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE          __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE         __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE          __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE         __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE         __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE        __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE         __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE         __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE         __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE        __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE        __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE        __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET         __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET       __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET         __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET       __HAL_RCC_ADC34_RELEASE_RESET
+#define __DAC2_FORCE_RESET          __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET        __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET         __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET       __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET         __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET       __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET         __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET       __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET        __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET      __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET        __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET        __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET        __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET      __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET      __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET      __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED       __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED      __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED      __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED     __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED      __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED     __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED        __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED       __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED        __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED       __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED       __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED      __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED       __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED      __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED       __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED      __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED       __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED      __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED      __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED     __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED        __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED       __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED      __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED     __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED      __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED     __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED      __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED     __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED      __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED     __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED      __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED     __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED      __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED     __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED      __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED     __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED      __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED     __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED     __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED    __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED       __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED      __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED       __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED      __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED       __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED      __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED        __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED       __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED     __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED    __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED       __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED      __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED       __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED      __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED       __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED      __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED       __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED      __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED     __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED    __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED     __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED    __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED     __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED    __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED       __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED      __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED       __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED      __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED       __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED      __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED       __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED      __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED       __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED      __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED       __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED      __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED       __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED      __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED       __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED      __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED       __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED      __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED      __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED     __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED      __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED     __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED      __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED     __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED      __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED     __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED      __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED     __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED      __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED     __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED      __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED     __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED      __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED     __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED      __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED     __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED        __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED       __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED      __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED     __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED      __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED     __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED     __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED    __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED     __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED    __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED     __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED    __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED        __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED       __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED       __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED      __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32L1)
+#define __HAL_RCC_CRYP_CLK_DISABLE         __HAL_RCC_AES_CLK_DISABLE
+#define __HAL_RCC_CRYP_CLK_ENABLE          __HAL_RCC_AES_CLK_ENABLE
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE   __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE    __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __HAL_RCC_CRYP_FORCE_RESET         __HAL_RCC_AES_FORCE_RESET
+#define __HAL_RCC_CRYP_RELEASE_RESET       __HAL_RCC_AES_RELEASE_RESET
+#endif /* STM32L1 */
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET       __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET     __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE  __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE        __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE       __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED    __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED   __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection               SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1               RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48          RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK         RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG            __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE        __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET         __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET       __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE    __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE   __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE          __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE         __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED      __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED     __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection                 Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO                 RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG              __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE          __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48             RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK           RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#if defined(STM32H7)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE()              __HAL_RCC_USB1_OTG_HS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE()         __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE()             __HAL_RCC_USB1_OTG_HS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE()        __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET()             __HAL_RCC_USB1_OTG_HS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET()           __HAL_RCC_USB1_OTG_HS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE()        __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE()   __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE()       __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE()  __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE()
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE()             __HAL_RCC_USB2_OTG_FS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE()        __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE()            __HAL_RCC_USB2_OTG_FS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE()       __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET()            __HAL_RCC_USB2_OTG_FS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET()          __HAL_RCC_USB2_OTG_FS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE()       __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE()  __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE()      __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE()
+#endif
+
+#define __HAL_RCC_I2SCLK            __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG     __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC                RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE             IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE        IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV           IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV             IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK            IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14                RCC_IT_HSI14RDY
+
+#define RCC_IT_CSSLSE               RCC_IT_LSECSS
+#define RCC_IT_CSSHSE               RCC_IT_CSS
+
+#define RCC_PLLMUL_3                RCC_PLL_MUL3
+#define RCC_PLLMUL_4                RCC_PLL_MUL4
+#define RCC_PLLMUL_6                RCC_PLL_MUL6
+#define RCC_PLLMUL_8                RCC_PLL_MUL8
+#define RCC_PLLMUL_12               RCC_PLL_MUL12
+#define RCC_PLLMUL_16               RCC_PLL_MUL16
+#define RCC_PLLMUL_24               RCC_PLL_MUL24
+#define RCC_PLLMUL_32               RCC_PLL_MUL32
+#define RCC_PLLMUL_48               RCC_PLL_MUL48
+
+#define RCC_PLLDIV_2                RCC_PLL_DIV2
+#define RCC_PLLDIV_3                RCC_PLL_DIV3
+#define RCC_PLLDIV_4                RCC_PLL_DIV4
+
+#define IS_RCC_MCOSOURCE            IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG        __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV               RCC_MCODIV_1
+#define RCC_MCO_DIV1                RCC_MCODIV_1
+#define RCC_MCO_DIV2                RCC_MCODIV_2
+#define RCC_MCO_DIV4                RCC_MCODIV_4
+#define RCC_MCO_DIV8                RCC_MCODIV_8
+#define RCC_MCO_DIV16               RCC_MCODIV_16
+#define RCC_MCO_DIV32               RCC_MCODIV_32
+#define RCC_MCO_DIV64               RCC_MCODIV_64
+#define RCC_MCO_DIV128              RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE          RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI           RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE           RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK        RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI           RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14         RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48         RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE           RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1   RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV  RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2   RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL)
+#define RCC_RTCCLKSOURCE_NO_CLK     RCC_RTCCLKSOURCE_NONE
+#else
+#define RCC_RTCCLKSOURCE_NONE       RCC_RTCCLKSOURCE_NO_CLK
+#endif
+
+#define RCC_USBCLK_PLLSAI1          RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL              RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI              RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK     RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1          RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5        RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2          RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3          RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber        RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER        RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber        RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER        RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER        RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber        RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER        RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber        RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER        RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber     RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber       RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber        RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER        RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber        RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER        RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER       RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber        RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER        RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber        RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER        RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER       RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber     RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber       RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber         RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER         RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS       RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS      RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS      RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS     RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE      RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE      RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB            RCC_CR_HSION_BB
+#define CR_CSSON_BB            RCC_CR_CSSON_BB
+#define CR_PLLON_BB            RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB         RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB            RCC_CR_MSION_BB
+#define CSR_LSION_BB           RCC_CSR_LSION_BB
+#define CSR_LSEON_BB           RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB          RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB           RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB          RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB         RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB          RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB          RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB            RCC_CR_HSEON_BB
+#define CSR_RMVF_BB            RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB         RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB      RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER     __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER    __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB        __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB       __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE         __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE                     __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM       RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV         RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48               RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ           RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP        RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ        RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE             IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48           RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE             __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE            __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED         __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED        __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET            __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET          __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE       __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE      __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED   __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED  __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection         Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM         RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK     RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDMCLKSOURCE_SYSCLK   RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG      __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE  __HAL_RCC_GET_DFSDM1_SOURCE
+#define RCC_DFSDM1CLKSOURCE_PCLK    RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_SWPMI1CLKSOURCE_PCLK    RCC_SWPMI1CLKSOURCE_PCLK1
+#define RCC_LPTIM1CLKSOURCE_PCLK    RCC_LPTIM1CLKSOURCE_PCLK1
+#define RCC_LPTIM2CLKSOURCE_PCLK    RCC_LPTIM2CLKSOURCE_PCLK1
+
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1    RCC_DFSDM1AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2    RCC_DFSDM1AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1    RCC_DFSDM2AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2    RCC_DFSDM2AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM1CLKSOURCE_APB2            RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDM2CLKSOURCE_APB2            RCC_DFSDM2CLKSOURCE_PCLK2
+#define RCC_FMPI2C1CLKSOURCE_APB            RCC_FMPI2C1CLKSOURCE_PCLK1
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define  HAL_RNG_ReadyCallback(__HANDLE__)  HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL)
+#else
+#define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
+#endif
+#define __HAL_RTC_DISABLE_IT                      __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT                       __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT)  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT)   __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT)  __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT)    __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT)   __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+                                                   (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__)   (((__EXTI_LINE__)  == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__)    (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__)   (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+                                                      (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() :  \
+                                                          __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif   /* STM32F1 */
+
+#define IS_ALARM                                  IS_RTC_ALARM
+#define IS_ALARM_MASK                             IS_RTC_ALARM_MASK
+#define IS_TAMPER                                 IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE                      IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER                          IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT                       IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE                  IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION              IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE                    IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ                   IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION     IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER                         IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK                           IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER                         IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE  __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE  __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define SD_OCR_CID_CSD_OVERWRIETE   SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS         SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4) || defined(STM32F2)
+#define  SD_SDMMC_DISABLED          SD_SDIO_DISABLED
+#define  SD_SDMMC_FUNCTION_BUSY     SD_SDIO_FUNCTION_BUSY
+#define  SD_SDMMC_FUNCTION_FAILED   SD_SDIO_FUNCTION_FAILED
+#define  SD_SDMMC_UNKNOWN_FUNCTION  SD_SDIO_UNKNOWN_FUNCTION
+#define  SD_CMD_SDMMC_SEN_OP_COND   SD_CMD_SDIO_SEN_OP_COND
+#define  SD_CMD_SDMMC_RW_DIRECT     SD_CMD_SDIO_RW_DIRECT
+#define  SD_CMD_SDMMC_RW_EXTENDED   SD_CMD_SDIO_RW_EXTENDED
+#define  __HAL_SD_SDMMC_ENABLE      __HAL_SD_SDIO_ENABLE
+#define  __HAL_SD_SDMMC_DISABLE     __HAL_SD_SDIO_DISABLE
+#define  __HAL_SD_SDMMC_DMA_ENABLE  __HAL_SD_SDIO_DMA_ENABLE
+#define  __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define  __HAL_SD_SDMMC_ENABLE_IT   __HAL_SD_SDIO_ENABLE_IT
+#define  __HAL_SD_SDMMC_DISABLE_IT  __HAL_SD_SDIO_DISABLE_IT
+#define  __HAL_SD_SDMMC_GET_FLAG    __HAL_SD_SDIO_GET_FLAG
+#define  __HAL_SD_SDMMC_CLEAR_FLAG  __HAL_SD_SDIO_CLEAR_FLAG
+#define  __HAL_SD_SDMMC_GET_IT      __HAL_SD_SDIO_GET_IT
+#define  __HAL_SD_SDMMC_CLEAR_IT    __HAL_SD_SDIO_CLEAR_IT
+#define  SDMMC_STATIC_FLAGS         SDIO_STATIC_FLAGS
+#define  SDMMC_CMD0TIMEOUT          SDIO_CMD0TIMEOUT
+#define  SD_SDMMC_SEND_IF_COND      SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define  SDMMC1_IRQn                SDIO_IRQn
+#define  SDMMC1_IRQHandler          SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define  SD_SDIO_DISABLED           SD_SDMMC_DISABLED
+#define  SD_SDIO_FUNCTION_BUSY      SD_SDMMC_FUNCTION_BUSY
+#define  SD_SDIO_FUNCTION_FAILED    SD_SDMMC_FUNCTION_FAILED
+#define  SD_SDIO_UNKNOWN_FUNCTION   SD_SDMMC_UNKNOWN_FUNCTION
+#define  SD_CMD_SDIO_SEN_OP_COND    SD_CMD_SDMMC_SEN_OP_COND
+#define  SD_CMD_SDIO_RW_DIRECT      SD_CMD_SDMMC_RW_DIRECT
+#define  SD_CMD_SDIO_RW_EXTENDED    SD_CMD_SDMMC_RW_EXTENDED
+#define  __HAL_SD_SDIO_ENABLE       __HAL_SD_SDMMC_ENABLE
+#define  __HAL_SD_SDIO_DISABLE      __HAL_SD_SDMMC_DISABLE
+#define  __HAL_SD_SDIO_DMA_ENABLE   __HAL_SD_SDMMC_DMA_ENABLE
+#define  __HAL_SD_SDIO_DMA_DISABL   __HAL_SD_SDMMC_DMA_DISABLE
+#define  __HAL_SD_SDIO_ENABLE_IT    __HAL_SD_SDMMC_ENABLE_IT
+#define  __HAL_SD_SDIO_DISABLE_IT   __HAL_SD_SDMMC_DISABLE_IT
+#define  __HAL_SD_SDIO_GET_FLAG     __HAL_SD_SDMMC_GET_FLAG
+#define  __HAL_SD_SDIO_CLEAR_FLAG   __HAL_SD_SDMMC_CLEAR_FLAG
+#define  __HAL_SD_SDIO_GET_IT       __HAL_SD_SDMMC_GET_IT
+#define  __HAL_SD_SDIO_CLEAR_IT     __HAL_SD_SDMMC_CLEAR_IT
+#define  SDIO_STATIC_FLAGS          SDMMC_STATIC_FLAGS
+#define  SDIO_CMD0TIMEOUT           SDMMC_CMD0TIMEOUT
+#define  SD_SDIO_SEND_IF_COND       SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define  SDIO_IRQn                  SDMMC1_IRQn
+#define  SDIO_IRQHandler            SDMMC1_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7)
+#define  HAL_SD_CardCIDTypedef       HAL_SD_CardCIDTypeDef
+#define  HAL_SD_CardCSDTypedef       HAL_SD_CardCSDTypeDef
+#define  HAL_SD_CardStatusTypedef    HAL_SD_CardStatusTypeDef
+#define  HAL_SD_CardStateTypedef     HAL_SD_CardStateTypeDef
+#endif
+
+#if defined(STM32H7) || defined(STM32L5)
+#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback   HAL_MMCEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback   HAL_MMCEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback  HAL_MMCEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback  HAL_MMCEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback    HAL_SDEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback    HAL_SDEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback   HAL_SDEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback   HAL_SDEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SD_DriveTransciver_1_8V_Callback          HAL_SD_DriveTransceiver_1_8V_Callback
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __SMARTCARD_ENABLE_IT           __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT          __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE              __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE             __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE  __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE  SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE      SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING    IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_SMBUS_RESET_CR1           SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2           SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START      SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH      SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR             SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE       SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE        SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED   SMBUS_GET_ALERT_ENABLED
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_SPI_1LINE_TX              SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX              SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC             SPI_RESET_CRC
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_UART_GETCLOCKSOURCE       UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION     UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE           UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION         UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE           IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE           IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING         IS_UART_ONE_BIT_SAMPLE
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __USART_ENABLE_IT               __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT              __HAL_USART_DISABLE_IT
+#define __USART_ENABLE                  __HAL_USART_ENABLE
+#define __USART_DISABLE                 __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE      USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE          USART_GETCLOCKSOURCE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define USB_EXTI_LINE_WAKEUP                               USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE                    USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE                   USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE                      USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP                            USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE                    USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE                   USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE                      USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP                            USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT                           __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT                          __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG                            __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG                          __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER             __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER            __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER           __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT                        __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT                       __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG                         __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG                       __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER          __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER         __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER        __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT                    __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT                        __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT                       __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG                         __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG                       __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER          __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER         __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER        __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT                    __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup                         HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup                       HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo                                  HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo                                  HAL_PCDEx_SetRxFiFo
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_TIM_SetICPrescalerValue   TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS                __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT                __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS          __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS      __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER             __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter            __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter            __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload         __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload         __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision      __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision      __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler        __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler        __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare            __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare            __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM  TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+  * @}
+  */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_ETH_EXTI_ENABLE_IT                   __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT                  __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG                    __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG                  __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER     __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER    __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER   __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE   ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE  ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE      IS_ETH_PROMISCUOUS_MODE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+#define __HAL_LTDC_RELOAD_CONFIG  __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define SAI_OUTPUTDRIVE_DISABLED          SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED           SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED         SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED        SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE                     SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty              SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull   SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull       SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull           SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull      SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full               SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE      IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT               SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE             SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined(STM32H7)
+#define HAL_SPDIFRX_ReceiveControlFlow      HAL_SPDIFRX_ReceiveCtrlFlow
+#define HAL_SPDIFRX_ReceiveControlFlow_IT   HAL_SPDIFRX_ReceiveCtrlFlow_IT
+#define HAL_SPDIFRX_ReceiveControlFlow_DMA  HAL_SPDIFRX_ReceiveCtrlFlow_DMA
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3)
+#define HAL_HRTIM_WaveformCounterStart_IT      HAL_HRTIM_WaveformCountStart_IT
+#define HAL_HRTIM_WaveformCounterStart_DMA     HAL_HRTIM_WaveformCountStart_DMA
+#define HAL_HRTIM_WaveformCounterStart         HAL_HRTIM_WaveformCountStart
+#define HAL_HRTIM_WaveformCounterStop_IT       HAL_HRTIM_WaveformCountStop_IT
+#define HAL_HRTIM_WaveformCounterStop_DMA      HAL_HRTIM_WaveformCountStop_DMA
+#define HAL_HRTIM_WaveformCounterStop          HAL_HRTIM_WaveformCountStop
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7)
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE
+#endif /* STM32L4 || STM32F4 || STM32F7 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h

@@ -0,0 +1,128 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_can_ex_legacy.h
+  * @author  MCD Application Team
+  * @brief   Header file of CAN HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CAN_EX_LEGACY_H
+#define __STM32F1xx_HAL_CAN_EX_LEGACY_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
+    defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CANEx CANEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+
+/** 
+  * @brief  CAN filter configuration structure definition
+  */
+/* CAN filter banks differences over STM32F1 devices:                         */
+/* - STM32F1 Connectivity line: 28 filter banks shared between CAN1 and CAN2  */
+/* - Other STM32F10x devices:   14 filter banks                               */
+
+typedef struct
+{
+  uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
+                                       configuration, first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
+                                              
+  uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
+                                       configuration, second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
+
+  uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (MSBs for a 32-bit configuration,
+                                       first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
+
+  uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (LSBs for a 32-bit configuration,
+                                       second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
+
+  uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+                                       This parameter can be a value of @ref CAN_filter_FIFO */
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized. 
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+#else
+  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized. 
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 13. */
+#endif /* STM32F105xC || STM32F107xC */
+  uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
+                                       This parameter can be a value of @ref CAN_filter_mode */
+
+  uint32_t FilterScale;           /*!< Specifies the filter scale.
+                                       This parameter can be a value of @ref CAN_filter_scale */
+
+  uint32_t FilterActivation;      /*!< Enable or disable the filter.
+                                       This parameter can be set to ENABLE or DISABLE. */
+                                       
+  uint32_t BankNumber;            /*!< Select the start slave bank filter
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 28. */ 
+  
+}CAN_FilterConfTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup CANEx_Private_Macros CAN Extended Private Macros
+  * @{
+  */
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U)
+#else
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13U)
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC    */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CAN_EX_LEGACY_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h

@@ -0,0 +1,796 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_can_legacy.h
+  * @author  MCD Application Team
+  * @brief   Header file of CAN HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CAN_LEGACY_H
+#define __STM32F1xx_HAL_CAN_LEGACY_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+     
+#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
+    defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CAN
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_CAN_STATE_RESET             = 0x00U,  /*!< CAN not yet initialized or disabled */
+  HAL_CAN_STATE_READY             = 0x01U,  /*!< CAN initialized and ready for use   */
+  HAL_CAN_STATE_BUSY              = 0x02U,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_TX           = 0x12U,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_RX0          = 0x22U,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_RX1          = 0x32U,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_TX_RX0       = 0x42U,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_TX_RX1       = 0x52U,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_RX0_RX1      = 0x62U,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_TX_RX0_RX1   = 0x72U,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_TIMEOUT           = 0x03U,  /*!< CAN in Timeout state                */
+  HAL_CAN_STATE_ERROR             = 0x04U   /*!< CAN error state                     */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+  * @brief  CAN init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Specifies the length of a time quantum.
+                            This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+
+  uint32_t Mode;       /*!< Specifies the CAN operating mode.
+                            This parameter can be a value of @ref CAN_operating_mode */
+
+  uint32_t SJW;        /*!< Specifies the maximum number of time quanta
+                            the CAN hardware is allowed to lengthen or
+                            shorten a bit to perform resynchronization.
+                            This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+  uint32_t BS1;        /*!< Specifies the number of time quanta in Bit Segment 1.
+                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+  uint32_t BS2;        /*!< Specifies the number of time quanta in Bit Segment 2.
+                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+  uint32_t TTCM;       /*!< Enable or disable the time triggered communication mode.
+                            This parameter can be set to ENABLE or DISABLE. */
+
+  uint32_t ABOM;       /*!< Enable or disable the automatic bus-off management.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t AWUM;       /*!< Enable or disable the automatic wake-up mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t NART;       /*!< Enable or disable the non-automatic retransmission mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t RFLM;       /*!< Enable or disable the receive FIFO Locked mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t TXFP;       /*!< Enable or disable the transmit FIFO priority.
+                            This parameter can be set to ENABLE or DISABLE */
+}CAN_InitTypeDef;
+
+/** 
+  * @brief  CAN Tx message structure definition  
+  */
+typedef struct
+{
+  uint32_t StdId;    /*!< Specifies the standard identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+  uint32_t ExtId;    /*!< Specifies the extended identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+  uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_Identifier_Type */
+
+  uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+  uint8_t Data[8];   /*!< Contains the data to be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+}CanTxMsgTypeDef;
+
+/**
+  * @brief  CAN Rx message structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;       /*!< Specifies the standard identifier.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+  uint32_t ExtId;       /*!< Specifies the extended identifier.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+  uint32_t IDE;         /*!< Specifies the type of identifier for the message that will be received.
+                             This parameter can be a value of @ref CAN_Identifier_Type */
+
+  uint32_t RTR;         /*!< Specifies the type of frame for the received message.
+                             This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;         /*!< Specifies the length of the frame that will be received.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+  uint8_t Data[8];      /*!< Contains the data to be received.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+  uint32_t FMI;         /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+  uint32_t FIFONumber;  /*!< Specifies the receive FIFO number.
+                             This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+  * @brief  CAN handle Structure definition
+  */
+typedef struct
+{
+  CAN_TypeDef                 *Instance;  /*!< Register base address          */
+
+  CAN_InitTypeDef             Init;       /*!< CAN required parameters        */
+
+  CanTxMsgTypeDef*            pTxMsg;     /*!< Pointer to transmit structure  */
+
+  CanRxMsgTypeDef*            pRxMsg;     /*!< Pointer to reception structure for RX FIFO0 msg */
+
+  CanRxMsgTypeDef*            pRx1Msg;    /*!< Pointer to reception structure for RX FIFO1 msg */
+
+  __IO HAL_CAN_StateTypeDef   State;      /*!< CAN communication state        */
+
+  HAL_LockTypeDef             Lock;       /*!< CAN locking object             */
+
+  __IO uint32_t               ErrorCode;  /*!< CAN Error code                 */
+
+}CAN_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+  * @{
+  */
+
+/** @defgroup CAN_Error_Code CAN Error Code
+  * @{
+  */
+#define   HAL_CAN_ERROR_NONE      0x00000000U    /*!< No error             */
+#define   HAL_CAN_ERROR_EWG       0x00000001U    /*!< EWG error            */
+#define   HAL_CAN_ERROR_EPV       0x00000002U    /*!< EPV error            */
+#define   HAL_CAN_ERROR_BOF       0x00000004U    /*!< BOF error            */
+#define   HAL_CAN_ERROR_STF       0x00000008U    /*!< Stuff error          */
+#define   HAL_CAN_ERROR_FOR       0x00000010U    /*!< Form error           */
+#define   HAL_CAN_ERROR_ACK       0x00000020U    /*!< Acknowledgment error */
+#define   HAL_CAN_ERROR_BR        0x00000040U    /*!< Bit recessive        */
+#define   HAL_CAN_ERROR_BD        0x00000080U    /*!< LEC dominant         */
+#define   HAL_CAN_ERROR_CRC       0x00000100U    /*!< LEC transfer error   */
+#define   HAL_CAN_ERROR_FOV0      0x00000200U    /*!< FIFO0 overrun error  */
+#define   HAL_CAN_ERROR_FOV1      0x00000400U    /*!< FIFO1 overrun error  */
+#define   HAL_CAN_ERROR_TXFAIL    0x00000800U    /*!< Transmit failure     */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_InitStatus CAN initialization Status
+  * @{
+  */
+#define CAN_INITSTATUS_FAILED       0x00000000U  /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS      0x00000001U  /*!< CAN initialization OK */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+  * @{
+  */
+#define CAN_MODE_NORMAL             0x00000000U                                /*!< Normal mode   */
+#define CAN_MODE_LOOPBACK           ((uint32_t)CAN_BTR_LBKM)                   /*!< Loopback mode */
+#define CAN_MODE_SILENT             ((uint32_t)CAN_BTR_SILM)                   /*!< Silent mode   */
+#define CAN_MODE_SILENT_LOOPBACK    ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM))  /*!< Loopback combined with silent mode */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
+  * @{
+  */
+#define CAN_SJW_1TQ                 0x00000000U                /*!< 1 time quantum */
+#define CAN_SJW_2TQ                 ((uint32_t)CAN_BTR_SJW_0)  /*!< 2 time quantum */
+#define CAN_SJW_3TQ                 ((uint32_t)CAN_BTR_SJW_1)  /*!< 3 time quantum */
+#define CAN_SJW_4TQ                 ((uint32_t)CAN_BTR_SJW)    /*!< 4 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
+  * @{
+  */
+#define CAN_BS1_1TQ                 0x00000000U                                                  /*!< 1 time quantum  */
+#define CAN_BS1_2TQ                 ((uint32_t)CAN_BTR_TS1_0)                                    /*!< 2 time quantum  */
+#define CAN_BS1_3TQ                 ((uint32_t)CAN_BTR_TS1_1)                                    /*!< 3 time quantum  */
+#define CAN_BS1_4TQ                 ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0))                  /*!< 4 time quantum  */
+#define CAN_BS1_5TQ                 ((uint32_t)CAN_BTR_TS1_2)                                    /*!< 5 time quantum  */
+#define CAN_BS1_6TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0))                  /*!< 6 time quantum  */
+#define CAN_BS1_7TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1))                  /*!< 7 time quantum  */
+#define CAN_BS1_8TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 8 time quantum  */
+#define CAN_BS1_9TQ                 ((uint32_t)CAN_BTR_TS1_3)                                    /*!< 9 time quantum  */
+#define CAN_BS1_10TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0))                  /*!< 10 time quantum */
+#define CAN_BS1_11TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1))                  /*!< 11 time quantum */
+#define CAN_BS1_12TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 12 time quantum */
+#define CAN_BS1_13TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2))                  /*!< 13 time quantum */
+#define CAN_BS1_14TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0))  /*!< 14 time quantum */
+#define CAN_BS1_15TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1))  /*!< 15 time quantum */
+#define CAN_BS1_16TQ                ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
+  * @{
+  */
+#define CAN_BS2_1TQ                 0x00000000U                                  /*!< 1 time quantum */
+#define CAN_BS2_2TQ                 ((uint32_t)CAN_BTR_TS2_0)                    /*!< 2 time quantum */
+#define CAN_BS2_3TQ                 ((uint32_t)CAN_BTR_TS2_1)                    /*!< 3 time quantum */
+#define CAN_BS2_4TQ                 ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0))  /*!< 4 time quantum */
+#define CAN_BS2_5TQ                 ((uint32_t)CAN_BTR_TS2_2)                    /*!< 5 time quantum */
+#define CAN_BS2_6TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0))  /*!< 6 time quantum */
+#define CAN_BS2_7TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1))  /*!< 7 time quantum */
+#define CAN_BS2_8TQ                 ((uint32_t)CAN_BTR_TS2)                      /*!< 8 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_mode  CAN Filter Mode
+  * @{
+  */
+#define CAN_FILTERMODE_IDMASK       ((uint8_t)0x00)  /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST       ((uint8_t)0x01)  /*!< Identifier list mode */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+  * @{
+  */
+#define CAN_FILTERSCALE_16BIT       ((uint8_t)0x00)  /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT       ((uint8_t)0x01)  /*!< One 32-bit filter  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+  * @{
+  */
+#define CAN_FILTER_FIFO0             ((uint8_t)0x00)  /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1             ((uint8_t)0x01)  /*!< Filter FIFO 1 assignment for filter x */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Identifier_Type CAN Identifier Type
+  * @{
+  */
+#define CAN_ID_STD                  0x00000000U  /*!< Standard Id */
+#define CAN_ID_EXT                  0x00000004U  /*!< Extended Id */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+  * @{
+  */
+#define CAN_RTR_DATA                0x00000000U  /*!< Data frame */
+#define CAN_RTR_REMOTE              0x00000002U  /*!< Remote frame */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_transmit_constants CAN Transmit Constants
+  * @{
+  */
+#define CAN_TXSTATUS_NOMAILBOX      ((uint8_t)0x04)  /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number
+  * @{
+  */
+#define CAN_FIFO0                   ((uint8_t)0x00)  /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1                   ((uint8_t)0x01)  /*!< CAN FIFO 1 used to receive */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_flags CAN Flags
+  * @{
+  */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+   and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+   CAN_GetFlagStatus() function.  */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0             ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP0_BIT_POSITION))  /*!< Request MailBox0 flag         */
+#define CAN_FLAG_RQCP1             ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP1_BIT_POSITION))  /*!< Request MailBox1 flag         */
+#define CAN_FLAG_RQCP2             ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP2_BIT_POSITION))  /*!< Request MailBox2 flag         */
+#define CAN_FLAG_TXOK0             ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK0_BIT_POSITION))  /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1             ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK1_BIT_POSITION))  /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2             ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK2_BIT_POSITION))  /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0              ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME0_BIT_POSITION))   /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1              ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME1_BIT_POSITION))   /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2              ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME2_BIT_POSITION))   /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0               ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FF0_BIT_POSITION))  /*!< FIFO 0 Full flag    */
+#define CAN_FLAG_FOV0              ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FOV0_BIT_POSITION)) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1               ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FF1_BIT_POSITION))  /*!< FIFO 1 Full flag    */
+#define CAN_FLAG_FOV1              ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FOV1_BIT_POSITION)) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU               ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_WKU_BIT_POSITION))    /*!< Wake up flag           */
+#define CAN_FLAG_SLAK              ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAK_BIT_POSITION))   /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI             ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAKI_BIT_POSITION))  /*!< Sleep acknowledge flag */
+
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. 
+         In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG               ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EWG_BIT_POSITION))    /*!< Error warning flag   */
+#define CAN_FLAG_EPV               ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EPV_BIT_POSITION))    /*!< Error passive flag   */
+#define CAN_FLAG_BOF               ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_BOF_BIT_POSITION))    /*!< Bus-Off flag         */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Interrupts CAN Interrupts
+  * @{
+  */
+#define CAN_IT_TME                  ((uint32_t)CAN_IER_TMEIE)   /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0                 ((uint32_t)CAN_IER_FMPIE0)  /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0                  ((uint32_t)CAN_IER_FFIE0)   /*!< FIFO 0 full interrupt            */
+#define CAN_IT_FOV0                 ((uint32_t)CAN_IER_FOVIE0)  /*!< FIFO 0 overrun interrupt         */
+#define CAN_IT_FMP1                 ((uint32_t)CAN_IER_FMPIE1)  /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1                  ((uint32_t)CAN_IER_FFIE1)   /*!< FIFO 1 full interrupt            */
+#define CAN_IT_FOV1                 ((uint32_t)CAN_IER_FOVIE1)  /*!< FIFO 1 overrun interrupt         */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU                  ((uint32_t)CAN_IER_WKUIE)  /*!< Wake-up interrupt           */
+#define CAN_IT_SLK                  ((uint32_t)CAN_IER_SLKIE)  /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG                  ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt   */
+#define CAN_IT_EPV                  ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt   */
+#define CAN_IT_BOF                  ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt         */
+#define CAN_IT_LEC                  ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR                  ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt           */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Private_Constants CAN Private Constants
+  * @{
+  */
+
+/* CAN intermediate shift values used for CAN flags */
+#define TSR_REGISTER_INDEX      0x5U
+#define RF0R_REGISTER_INDEX     0x2U
+#define RF1R_REGISTER_INDEX     0x4U
+#define MSR_REGISTER_INDEX      0x1U
+#define ESR_REGISTER_INDEX      0x3U
+
+/* CAN flags bits position into their respective register (TSR, RF0R, RF1R or MSR regsiters) */
+/* Transmit Flags */
+#define CAN_TSR_RQCP0_BIT_POSITION     0x00000000U
+#define CAN_TSR_RQCP1_BIT_POSITION     0x00000008U
+#define CAN_TSR_RQCP2_BIT_POSITION     0x00000010U
+#define CAN_TSR_TXOK0_BIT_POSITION     0x00000001U
+#define CAN_TSR_TXOK1_BIT_POSITION     0x00000009U
+#define CAN_TSR_TXOK2_BIT_POSITION     0x00000011U
+#define CAN_TSR_TME0_BIT_POSITION      0x0000001AU
+#define CAN_TSR_TME1_BIT_POSITION      0x0000001BU
+#define CAN_TSR_TME2_BIT_POSITION      0x0000001CU
+
+/* Receive Flags */
+#define CAN_RF0R_FF0_BIT_POSITION      0x00000003U
+#define CAN_RF0R_FOV0_BIT_POSITION     0x00000004U
+
+#define CAN_RF1R_FF1_BIT_POSITION      0x00000003U
+#define CAN_RF1R_FOV1_BIT_POSITION     0x00000004U
+
+/* Operating Mode Flags */
+#define CAN_MSR_WKU_BIT_POSITION       0x00000003U
+#define CAN_MSR_SLAK_BIT_POSITION      0x00000001U
+#define CAN_MSR_SLAKI_BIT_POSITION     0x00000004U
+
+/* Error Flags */
+#define CAN_ESR_EWG_BIT_POSITION       0x00000000U
+#define CAN_ESR_EPV_BIT_POSITION       0x00000001U
+#define CAN_ESR_BOF_BIT_POSITION       0x00000002U
+
+/* Mask used by macro to get/clear CAN flags*/
+#define CAN_FLAG_MASK                  0x000000FFU
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0   ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1   ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2   ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+  * @{
+  */
+
+/** @brief  Reset CAN handle state
+  * @param  __HANDLE__: CAN handle.
+  * @retval None
+  */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+  * @brief  Enable the specified CAN interrupts
+  * @param  __HANDLE__: CAN handle.
+  * @param  __INTERRUPT__: CAN Interrupt.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+  *            @arg CAN_IT_FMP0: FIFO 0 message pending interrupt
+  *            @arg CAN_IT_FF0 : FIFO 0 full interrupt
+  *            @arg CAN_IT_FOV0: FIFO 0 overrun interrupt
+  *            @arg CAN_IT_FMP1: FIFO 1 message pending interrupt
+  *            @arg CAN_IT_FF1 : FIFO 1 full interrupt
+  *            @arg CAN_IT_FOV1: FIFO 1 overrun interrupt
+  *            @arg CAN_IT_WKU : Wake-up interrupt
+  *            @arg CAN_IT_SLK : Sleep acknowledge interrupt
+  *            @arg CAN_IT_EWG : Error warning interrupt
+  *            @arg CAN_IT_EPV : Error passive interrupt
+  *            @arg CAN_IT_BOF : Bus-off interrupt
+  *            @arg CAN_IT_LEC : Last error code interrupt
+  *            @arg CAN_IT_ERR : Error Interrupt
+  * @retval None.
+  */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified CAN interrupts
+  * @param  __HANDLE__: CAN handle.
+  * @param  __INTERRUPT__: CAN Interrupt.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+  *            @arg CAN_IT_FMP0: FIFO 0 message pending interrupt
+  *            @arg CAN_IT_FF0 : FIFO 0 full interrupt
+  *            @arg CAN_IT_FOV0: FIFO 0 overrun interrupt
+  *            @arg CAN_IT_FMP1: FIFO 1 message pending interrupt
+  *            @arg CAN_IT_FF1 : FIFO 1 full interrupt
+  *            @arg CAN_IT_FOV1: FIFO 1 overrun interrupt
+  *            @arg CAN_IT_WKU : Wake-up interrupt
+  *            @arg CAN_IT_SLK : Sleep acknowledge interrupt
+  *            @arg CAN_IT_EWG : Error warning interrupt
+  *            @arg CAN_IT_EPV : Error passive interrupt
+  *            @arg CAN_IT_BOF : Bus-off interrupt
+  *            @arg CAN_IT_LEC : Last error code interrupt
+  *            @arg CAN_IT_ERR : Error Interrupt
+  * @retval None.
+  */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Return the number of pending received messages.
+  * @param  __HANDLE__: CAN handle.
+  * @param  __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+  * @retval The number of pending message.
+  */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R & 0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R & 0x03U)))
+
+/** @brief  Check whether the specified CAN flag is set or not.
+  * @param  __HANDLE__: specifies the CAN Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+  *            @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+  *            @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+  *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+  *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+  *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+  *            @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+  *            @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+  *            @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+  *            @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+  *            @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+  *            @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+  *            @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+  *            @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+  *            @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+  *            @arg CAN_FLAG_WKU: Wake up Flag
+  *            @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_EWG: Error Warning Flag
+  *            @arg CAN_FLAG_EPV: Error Passive Flag
+  *            @arg CAN_FLAG_BOF: Bus-Off Flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief  Clear the specified CAN pending flag.
+  * @param  __HANDLE__: specifies the CAN Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+  *            @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+  *            @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+  *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+  *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+  *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+  *            @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+  *            @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+  *            @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+  *            @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+  *            @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+  *            @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+  *            @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+  *            @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+  *            @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+  *            @arg CAN_FLAG_WKU: Wake up Flag
+  *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == TSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->TSR)  = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == RF0R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == RF1R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == MSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->MSR)  = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
+
+/** @brief  Check if the specified CAN interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the CAN Handle.
+  * @param  __INTERRUPT__: specifies the CAN interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+  *            @arg CAN_IT_FMP0: FIFO 0 message pending interrupt
+  *            @arg CAN_IT_FF0 : FIFO 0 full interrupt
+  *            @arg CAN_IT_FOV0: FIFO 0 overrun interrupt
+  *            @arg CAN_IT_FMP1: FIFO 1 message pending interrupt
+  *            @arg CAN_IT_FF1 : FIFO 1 full interrupt
+  *            @arg CAN_IT_FOV1: FIFO 1 overrun interrupt
+  *            @arg CAN_IT_WKU : Wake-up interrupt
+  *            @arg CAN_IT_SLK : Sleep acknowledge interrupt
+  *            @arg CAN_IT_EWG : Error warning interrupt
+  *            @arg CAN_IT_EPV : Error passive interrupt
+  *            @arg CAN_IT_BOF : Bus-off interrupt
+  *            @arg CAN_IT_LEC : Last error code interrupt
+  *            @arg CAN_IT_ERR : Error Interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+  * @brief  Check the transmission status of a CAN Frame.
+  * @param  __HANDLE__: specifies the CAN Handle.
+  * @param  __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+  * @retval The new status of transmission  (TRUE or FALSE).
+  */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TME2)))
+
+/**
+  * @brief  Release the specified receive FIFO.
+  * @param  __HANDLE__: CAN handle.
+  * @param  __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+  * @retval None.
+  */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1)) 
+
+/**
+  * @brief  Cancel a transmit request.
+  * @param  __HANDLE__: specifies the CAN Handle.
+  * @param  __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+  * @retval None.
+  */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2))
+
+/**
+  * @brief  Enable or disables the DBG Freeze for CAN.
+  * @param  __HANDLE__: specifies the CAN Handle.
+  * @param  __NEWSTATE__: new state of the CAN peripheral.
+  *         This parameter can be: ENABLE (CAN reception/transmission is frozen
+  *         during debug. Reception FIFOs can still be accessed/controlled normally)
+  *         or DISABLE (CAN is working during debug).
+  * @retval None
+  */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+  * @}
+  */
+
+/* Include CAN HAL Extension module */
+#include "stm32f1xx_hal_can_ex_legacy.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group1
+  * @brief    Initialization and Configuration functions 
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+  * @}
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group2
+  * @brief    I/O operation functions 
+  * @{
+  */
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+  * @}
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group3
+  * @brief   CAN Peripheral State functions 
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros   CAN Private Macros
+  * @{
+  */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+                           ((MODE) == CAN_MODE_LOOPBACK)|| \
+                           ((MODE) == CAN_MODE_SILENT) || \
+                           ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+                         ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+                                  ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+                                    ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+                                  ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U)
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID)   ((STDID) <= 0x00007FFU)
+#define IS_CAN_EXTID(EXTID)   ((EXTID) <= 0x1FFFFFFFU)
+#define IS_CAN_DLC(DLC)       ((DLC) <= ((uint8_t)0x08))
+
+#define IS_CAN_IDTYPE(IDTYPE)  (((IDTYPE) == CAN_ID_STD) || \
+                                ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CAN_LEGACY_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32_assert_template.h

@@ -0,0 +1,57 @@
+/**
+  ******************************************************************************
+  * @file    stm32_assert.h
+  * @author  MCD Application Team
+  * @brief   STM32 assert template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32_assert.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_ASSERT_H
+#define __STM32_ASSERT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Includes ------------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t* file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32_ASSERT_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h

@@ -0,0 +1,358 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the HAL
+  *          module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_H
+#define __STM32F1xx_HAL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_conf.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HAL
+  * @{
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+  * @{
+  */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+  * @{
+  */
+typedef enum
+{
+  HAL_TICK_FREQ_10HZ         = 100U,
+  HAL_TICK_FREQ_100HZ        = 10U,
+  HAL_TICK_FREQ_1KHZ         = 1U,
+  HAL_TICK_FREQ_DEFAULT      = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+/**
+  * @}
+  */
+/* Exported types ------------------------------------------------------------*/
+extern __IO uint32_t uwTick;
+extern uint32_t uwTickPrio;
+extern HAL_TickFreqTypeDef uwTickFreq;
+
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+  * @{
+  */
+
+/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
+  * @brief   Freeze/Unfreeze Peripherals in Debug mode
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * @{
+  */
+
+/* Peripherals on APB1 */
+/**
+  * @brief  TIM2 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
+
+/**
+  * @brief  TIM3 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM3()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM3()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
+
+#if defined (DBGMCU_CR_DBG_TIM4_STOP)
+/**
+  * @brief  TIM4 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM4()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM4()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM5_STOP)
+/**
+  * @brief  TIM5 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM5()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM5()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM6_STOP)
+/**
+  * @brief  TIM6 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM6()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM6()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM7_STOP)
+/**
+  * @brief  TIM7 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM7()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM7()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM12_STOP)
+/**
+  * @brief  TIM12 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM12()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM12()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM13_STOP)
+/**
+  * @brief  TIM13 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM13()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM13()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM14_STOP)
+/**
+  * @brief  TIM14 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM14()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM14()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
+#endif
+
+/**
+  * @brief  WWDG Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_WWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
+#define __HAL_DBGMCU_UNFREEZE_WWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
+
+/**
+  * @brief  IWDG Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_IWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
+#define __HAL_DBGMCU_UNFREEZE_IWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
+
+/**
+  * @brief  I2C1 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
+
+#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
+/**
+  * @brief  I2C2 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
+#endif
+
+#if defined (DBGMCU_CR_DBG_CAN1_STOP)
+/**
+  * @brief  CAN1 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_CAN1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_CAN1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_CAN2_STOP)
+/**
+  * @brief  CAN2 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_CAN2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_CAN2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
+#endif
+
+/* Peripherals on APB2 */
+#if defined (DBGMCU_CR_DBG_TIM1_STOP)
+/**
+  * @brief  TIM1 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM8_STOP)
+/**
+  * @brief  TIM8 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM8()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM8()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM9_STOP)
+/**
+  * @brief  TIM9 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM9()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM9()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM10_STOP)
+/**
+  * @brief  TIM10 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM10()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM10()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM11_STOP)
+/**
+  * @brief  TIM11 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM11()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM11()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
+#endif
+
+
+#if defined (DBGMCU_CR_DBG_TIM15_STOP)
+/**
+  * @brief  TIM15 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM15()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM15()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM16_STOP)
+/**
+  * @brief  TIM16 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM16()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM16()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM17_STOP)
+/**
+  * @brief  TIM17 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM17()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM17()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+  * @{
+  */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ)  || \
+                           ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+                           ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+  * @{
+  */
+/** @addtogroup HAL_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
+/**
+  * @}
+  */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(uint32_t Delay);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h

@@ -0,0 +1,1004 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_adc.h
+  * @author  MCD Application Team
+  * @brief   Header file containing functions prototypes of ADC HAL library.
+  ******************************************************************************
+  * @attention
+  *
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_ADC_H
+#define __STM32F1xx_HAL_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADC
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup ADC_Exported_Types ADC Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  Structure definition of ADC and regular group initialization 
+  * @note   Parameters of this structure are shared within 2 scopes:
+  *          - Scope entire ADC (affects regular and injected groups): DataAlign, ScanConvMode.
+  *          - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
+  * @note   The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+  *         ADC can be either disabled or enabled without conversion on going on regular group.
+  */
+typedef struct
+{
+  uint32_t DataAlign;                        /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
+                                                  or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
+                                                  This parameter can be a value of @ref ADC_Data_align */
+  uint32_t ScanConvMode;                     /*!< Configures the sequencer of regular and injected groups.
+                                                  This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+                                                  If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+                                                               Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+                                                  If enabled:  Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+                                                               Scan direction is upward: from rank1 to rank 'n'.
+                                                  This parameter can be a value of @ref ADC_Scan_mode
+                                                  Note: For regular group, this parameter should be enabled in conversion either by polling (HAL_ADC_Start with Discontinuous mode and NbrOfDiscConversion=1)
+                                                        or by DMA (HAL_ADC_Start_DMA), but not by interruption (HAL_ADC_Start_IT): in scan mode, interruption is triggered only on the
+                                                        the last conversion of the sequence. All previous conversions would be overwritten by the last one.
+                                                        Injected group used with scan mode has not this constraint: each rank has its own result register, no data is overwritten. */
+  FunctionalState ContinuousConvMode;         /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+                                                  after the selected trigger occurred (software start or external trigger).
+                                                  This parameter can be set to ENABLE or DISABLE. */
+  uint32_t NbrOfConversion;                  /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+                                                  To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+                                                  This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+  FunctionalState  DiscontinuousConvMode;    /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+                                                  Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                                  Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+                                                  This parameter can be set to ENABLE or DISABLE. */
+  uint32_t NbrOfDiscConversion;              /*!< Specifies the number of discontinuous conversions in which the  main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+                                                  If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+                                                  This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+  uint32_t ExternalTrigConv;                 /*!< Selects the external event used to trigger the conversion start of regular group.
+                                                  If set to ADC_SOFTWARE_START, external triggers are disabled.
+                                                  If set to external trigger source, triggering is on event rising edge.
+                                                  This parameter can be a value of @ref ADC_External_trigger_source_Regular */
+}ADC_InitTypeDef;
+
+/** 
+  * @brief  Structure definition of ADC channel for regular group   
+  * @note   The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+  *         ADC can be either disabled or enabled without conversion on going on regular group.
+  */ 
+typedef struct 
+{
+  uint32_t Channel;                /*!< Specifies the channel to configure into ADC regular group.
+                                        This parameter can be a value of @ref ADC_channels
+                                        Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability.
+                                        Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor) 
+                                        Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger.
+                                              It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel.
+                                              Refer to errata sheet of these devices for more details. */
+  uint32_t Rank;                   /*!< Specifies the rank in the regular group sequencer 
+                                        This parameter can be a value of @ref ADC_regular_rank
+                                        Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+  uint32_t SamplingTime;           /*!< Sampling time value to be set for the selected channel.
+                                        Unit: ADC clock cycles
+                                        Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+                                        This parameter can be a value of @ref ADC_sampling_times
+                                        Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+                                                 If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+                                        Note: In case of usage of internal measurement channels (VrefInt/TempSensor),
+                                              sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+                                              Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */
+}ADC_ChannelConfTypeDef;
+
+/**
+  * @brief  ADC Configuration analog watchdog definition
+  * @note   The setting of these parameters with function is conditioned to ADC state.
+  *         ADC state can be either disabled or enabled without conversion on going on regular and injected groups.
+  */
+typedef struct
+{
+  uint32_t WatchdogMode;      /*!< Configures the ADC analog watchdog mode: single/all channels, regular/injected group.
+                                   This parameter can be a value of @ref ADC_analog_watchdog_mode. */
+  uint32_t Channel;           /*!< Selects which ADC channel to monitor by analog watchdog.
+                                   This parameter has an effect only if watchdog mode is configured on single channel (parameter WatchdogMode)
+                                   This parameter can be a value of @ref ADC_channels. */
+  FunctionalState  ITMode;    /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+                                   This parameter can be set to ENABLE or DISABLE */
+  uint32_t HighThreshold;     /*!< Configures the ADC analog watchdog High threshold value.
+                                   This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+  uint32_t LowThreshold;      /*!< Configures the ADC analog watchdog High threshold value.
+                                   This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+  uint32_t WatchdogNumber;    /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+
+/** 
+  * @brief  HAL ADC state machine: ADC states definition (bitfields)
+  */ 
+/* States of ADC global scope */
+#define HAL_ADC_STATE_RESET             0x00000000U    /*!< ADC not yet initialized or disabled */
+#define HAL_ADC_STATE_READY             0x00000001U    /*!< ADC peripheral ready for use */
+#define HAL_ADC_STATE_BUSY_INTERNAL     0x00000002U    /*!< ADC is busy to internal process (initialization, calibration) */
+#define HAL_ADC_STATE_TIMEOUT           0x00000004U    /*!< TimeOut occurrence */
+
+/* States of ADC errors */
+#define HAL_ADC_STATE_ERROR_INTERNAL    0x00000010U    /*!< Internal error occurrence */
+#define HAL_ADC_STATE_ERROR_CONFIG      0x00000020U    /*!< Configuration error occurrence */
+#define HAL_ADC_STATE_ERROR_DMA         0x00000040U    /*!< DMA error occurrence */
+
+/* States of ADC group regular */
+#define HAL_ADC_STATE_REG_BUSY          0x00000100U    /*!< A conversion on group regular is ongoing or can occur (either by continuous mode,
+                                                           external trigger, low power auto power-on, multimode ADC master control) */
+#define HAL_ADC_STATE_REG_EOC           0x00000200U    /*!< Conversion data available on group regular */
+#define HAL_ADC_STATE_REG_OVR           0x00000400U    /*!< Not available on STM32F1 device: Overrun occurrence */
+#define HAL_ADC_STATE_REG_EOSMP         0x00000800U    /*!< Not available on STM32F1 device: End Of Sampling flag raised  */
+
+/* States of ADC group injected */
+#define HAL_ADC_STATE_INJ_BUSY          0x00001000U    /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode,
+                                                           external trigger, low power auto power-on, multimode ADC master control) */
+#define HAL_ADC_STATE_INJ_EOC           0x00002000U    /*!< Conversion data available on group injected */
+#define HAL_ADC_STATE_INJ_JQOVF         0x00004000U    /*!< Not available on STM32F1 device: Injected queue overflow occurrence */
+
+/* States of ADC analog watchdogs */
+#define HAL_ADC_STATE_AWD1              0x00010000U    /*!< Out-of-window occurrence of analog watchdog 1 */
+#define HAL_ADC_STATE_AWD2              0x00020000U    /*!< Not available on STM32F1 device: Out-of-window occurrence of analog watchdog 2 */
+#define HAL_ADC_STATE_AWD3              0x00040000U    /*!< Not available on STM32F1 device: Out-of-window occurrence of analog watchdog 3 */
+
+/* States of ADC multi-mode */
+#define HAL_ADC_STATE_MULTIMODE_SLAVE   0x00100000U    /*!< ADC in multimode slave state, controlled by another ADC master ( */
+
+
+/**
+  * @brief  ADC handle Structure definition  
+  */ 
+typedef struct __ADC_HandleTypeDef
+{
+  ADC_TypeDef                   *Instance;              /*!< Register base address */
+
+  ADC_InitTypeDef               Init;                   /*!< ADC required parameters */
+
+  DMA_HandleTypeDef             *DMA_Handle;            /*!< Pointer DMA Handler */
+
+  HAL_LockTypeDef               Lock;                   /*!< ADC locking object */
+  
+  __IO uint32_t                 State;                  /*!< ADC communication state (bitmap of ADC states) */
+
+  __IO uint32_t                 ErrorCode;              /*!< ADC Error code */
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+  void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc);              /*!< ADC conversion complete callback */
+  void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc);          /*!< ADC conversion DMA half-transfer callback */
+  void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc);      /*!< ADC analog watchdog 1 callback */
+  void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc);                 /*!< ADC error callback */
+  void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc);      /*!< ADC group injected conversion complete callback */       /*!< ADC end of sampling callback */
+  void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc);               /*!< ADC Msp Init callback */
+  void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc);             /*!< ADC Msp DeInit callback */
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+}ADC_HandleTypeDef;
+
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL ADC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_ADC_CONVERSION_COMPLETE_CB_ID     = 0x00U,  /*!< ADC conversion complete callback ID */
+  HAL_ADC_CONVERSION_HALF_CB_ID         = 0x01U,  /*!< ADC conversion DMA half-transfer callback ID */
+  HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID   = 0x02U,  /*!< ADC analog watchdog 1 callback ID */
+  HAL_ADC_ERROR_CB_ID                   = 0x03U,  /*!< ADC error callback ID */
+  HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U,  /*!< ADC group injected conversion complete callback ID */
+  HAL_ADC_MSPINIT_CB_ID                 = 0x09U,  /*!< ADC Msp Init callback ID          */
+  HAL_ADC_MSPDEINIT_CB_ID               = 0x0AU   /*!< ADC Msp DeInit callback ID        */
+} HAL_ADC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL ADC Callback pointer definition
+  */
+typedef  void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */
+
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+  * @{
+  */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+  * @{
+  */
+#define HAL_ADC_ERROR_NONE                0x00U   /*!< No error                                              */
+#define HAL_ADC_ERROR_INTERNAL            0x01U   /*!< ADC IP internal error: if problem of clocking, 
+                                                       enable/disable, erroneous state                       */
+#define HAL_ADC_ERROR_OVR                 0x02U   /*!< Overrun error                                         */
+#define HAL_ADC_ERROR_DMA                 0x04U   /*!< DMA transfer error                                    */
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+#define HAL_ADC_ERROR_INVALID_CALLBACK  (0x10U)   /*!< Invalid Callback error */
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+
+/** @defgroup ADC_Data_align ADC data alignment
+  * @{
+  */
+#define ADC_DATAALIGN_RIGHT      0x00000000U
+#define ADC_DATAALIGN_LEFT       ((uint32_t)ADC_CR2_ALIGN)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Scan_mode ADC scan mode
+  * @{
+  */
+/* Note: Scan mode values are not among binary choices ENABLE/DISABLE for     */
+/*       compatibility with other STM32 devices having a sequencer with       */
+/*       additional options.                                                  */
+#define ADC_SCAN_DISABLE         0x00000000U
+#define ADC_SCAN_ENABLE          ((uint32_t)ADC_CR1_SCAN)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC external trigger enable for regular group
+  * @{
+  */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE           0x00000000U
+#define ADC_EXTERNALTRIGCONVEDGE_RISING         ((uint32_t)ADC_CR2_EXTTRIG)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_channels ADC channels
+  * @{
+  */
+/* Note: Depending on devices, some channels may not be available on package  */
+/*       pins. Refer to device datasheet for channels availability.           */
+#define ADC_CHANNEL_0                       0x00000000U
+#define ADC_CHANNEL_1           ((uint32_t)(                                                                    ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_2           ((uint32_t)(                                                   ADC_SQR3_SQ1_1                 ))
+#define ADC_CHANNEL_3           ((uint32_t)(                                                   ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_4           ((uint32_t)(                                  ADC_SQR3_SQ1_2                                  ))
+#define ADC_CHANNEL_5           ((uint32_t)(                                  ADC_SQR3_SQ1_2                  | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_6           ((uint32_t)(                                  ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1                 ))
+#define ADC_CHANNEL_7           ((uint32_t)(                                  ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_8           ((uint32_t)(                 ADC_SQR3_SQ1_3                                                   ))
+#define ADC_CHANNEL_9           ((uint32_t)(                 ADC_SQR3_SQ1_3                                   | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_10          ((uint32_t)(                 ADC_SQR3_SQ1_3                  | ADC_SQR3_SQ1_1                 ))
+#define ADC_CHANNEL_11          ((uint32_t)(                 ADC_SQR3_SQ1_3                  | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_12          ((uint32_t)(                 ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2                                  ))
+#define ADC_CHANNEL_13          ((uint32_t)(                 ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2                  | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_14          ((uint32_t)(                 ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1                 ))
+#define ADC_CHANNEL_15          ((uint32_t)(                 ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_16          ((uint32_t)(ADC_SQR3_SQ1_4                                                                    ))
+#define ADC_CHANNEL_17          ((uint32_t)(ADC_SQR3_SQ1_4                                                    | ADC_SQR3_SQ1_0))
+
+#define ADC_CHANNEL_TEMPSENSOR  ADC_CHANNEL_16  /* ADC internal channel (no connection on device pin) */
+#define ADC_CHANNEL_VREFINT     ADC_CHANNEL_17  /* ADC internal channel (no connection on device pin) */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_sampling_times ADC sampling times
+  * @{
+  */
+#define ADC_SAMPLETIME_1CYCLE_5                   0x00000000U                                              /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_7CYCLES_5      ((uint32_t)(                                      ADC_SMPR2_SMP0_0)) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_13CYCLES_5     ((uint32_t)(                   ADC_SMPR2_SMP0_1                   )) /*!< Sampling time 13.5 ADC clock cycles */
+#define ADC_SAMPLETIME_28CYCLES_5     ((uint32_t)(                   ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 28.5 ADC clock cycles */
+#define ADC_SAMPLETIME_41CYCLES_5     ((uint32_t)(ADC_SMPR2_SMP0_2                                      )) /*!< Sampling time 41.5 ADC clock cycles */
+#define ADC_SAMPLETIME_55CYCLES_5     ((uint32_t)(ADC_SMPR2_SMP0_2                    | ADC_SMPR2_SMP0_0)) /*!< Sampling time 55.5 ADC clock cycles */
+#define ADC_SAMPLETIME_71CYCLES_5     ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1                   )) /*!< Sampling time 71.5 ADC clock cycles */
+#define ADC_SAMPLETIME_239CYCLES_5    ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 239.5 ADC clock cycles */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_regular_rank ADC rank into regular group
+  * @{
+  */
+#define ADC_REGULAR_RANK_1                 0x00000001U
+#define ADC_REGULAR_RANK_2                 0x00000002U
+#define ADC_REGULAR_RANK_3                 0x00000003U
+#define ADC_REGULAR_RANK_4                 0x00000004U
+#define ADC_REGULAR_RANK_5                 0x00000005U
+#define ADC_REGULAR_RANK_6                 0x00000006U
+#define ADC_REGULAR_RANK_7                 0x00000007U
+#define ADC_REGULAR_RANK_8                 0x00000008U
+#define ADC_REGULAR_RANK_9                 0x00000009U
+#define ADC_REGULAR_RANK_10                0x0000000AU
+#define ADC_REGULAR_RANK_11                0x0000000BU
+#define ADC_REGULAR_RANK_12                0x0000000CU
+#define ADC_REGULAR_RANK_13                0x0000000DU
+#define ADC_REGULAR_RANK_14                0x0000000EU
+#define ADC_REGULAR_RANK_15                0x0000000FU
+#define ADC_REGULAR_RANK_16                0x00000010U
+/**
+  * @}
+  */
+
+/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode
+  * @{
+  */
+#define ADC_ANALOGWATCHDOG_NONE                             0x00000000U
+#define ADC_ANALOGWATCHDOG_SINGLE_REG           ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC         ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC      ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG              ((uint32_t)ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC            ((uint32_t)ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC         ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_conversion_group ADC conversion group
+  * @{
+  */
+#define ADC_REGULAR_GROUP             ((uint32_t)(ADC_FLAG_EOC))
+#define ADC_INJECTED_GROUP            ((uint32_t)(ADC_FLAG_JEOC))
+#define ADC_REGULAR_INJECTED_GROUP    ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_JEOC))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Event_type ADC Event type
+  * @{
+  */
+#define ADC_AWD_EVENT               ((uint32_t)ADC_FLAG_AWD)   /*!< ADC Analog watchdog event */
+
+#define ADC_AWD1_EVENT              ADC_AWD_EVENT              /*!< ADC Analog watchdog 1 event: Alternate naming for compatibility with other STM32 devices having several analog watchdogs */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_interrupts_definition ADC interrupts definition
+  * @{
+  */
+#define ADC_IT_EOC           ADC_CR1_EOCIE        /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_JEOC          ADC_CR1_JEOCIE       /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IT_AWD           ADC_CR1_AWDIE        /*!< ADC Analog watchdog interrupt source */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_flags_definition ADC flags definition
+  * @{
+  */
+#define ADC_FLAG_STRT          ADC_SR_STRT     /*!< ADC Regular group start flag */
+#define ADC_FLAG_JSTRT         ADC_SR_JSTRT    /*!< ADC Injected group start flag */
+#define ADC_FLAG_EOC           ADC_SR_EOC      /*!< ADC End of Regular conversion flag */
+#define ADC_FLAG_JEOC          ADC_SR_JEOC     /*!< ADC End of Injected conversion flag */
+#define ADC_FLAG_AWD           ADC_SR_AWD      /*!< ADC Analog watchdog flag */
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup ADC_Private_Constants ADC Private Constants
+  * @{
+  */
+
+/** @defgroup ADC_conversion_cycles ADC conversion cycles
+  * @{
+  */
+/* ADC conversion cycles (unit: ADC clock cycles)                           */
+/* (selected sampling time + conversion time of 12.5 ADC clock cycles, with */
+/* resolution 12 bits)                                                      */
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_1CYCLE5                  14U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_7CYCLES5                 20U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_13CYCLES5                26U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_28CYCLES5                41U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_41CYCLES5                54U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_55CYCLES5                68U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_71CYCLES5                84U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_239CYCLES5              252U
+/**
+  * @}
+  */
+
+/** @defgroup ADC_sampling_times_all_channels ADC sampling times all channels
+  * @{
+  */
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2                                          \
+     (ADC_SMPR2_SMP9_2 | ADC_SMPR2_SMP8_2 | ADC_SMPR2_SMP7_2 | ADC_SMPR2_SMP6_2 |     \
+      ADC_SMPR2_SMP5_2 | ADC_SMPR2_SMP4_2 | ADC_SMPR2_SMP3_2 | ADC_SMPR2_SMP2_2 |     \
+      ADC_SMPR2_SMP1_2 | ADC_SMPR2_SMP0_2)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2                                          \
+     (ADC_SMPR1_SMP17_2 | ADC_SMPR1_SMP16_2 | ADC_SMPR1_SMP15_2 | ADC_SMPR1_SMP14_2 | \
+      ADC_SMPR1_SMP13_2 | ADC_SMPR1_SMP12_2 | ADC_SMPR1_SMP11_2 | ADC_SMPR1_SMP10_2 )
+
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1                                          \
+     (ADC_SMPR2_SMP9_1 | ADC_SMPR2_SMP8_1 | ADC_SMPR2_SMP7_1 | ADC_SMPR2_SMP6_1 |     \
+      ADC_SMPR2_SMP5_1 | ADC_SMPR2_SMP4_1 | ADC_SMPR2_SMP3_1 | ADC_SMPR2_SMP2_1 |     \
+      ADC_SMPR2_SMP1_1 | ADC_SMPR2_SMP0_1)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1                                          \
+     (ADC_SMPR1_SMP17_1 | ADC_SMPR1_SMP16_1 | ADC_SMPR1_SMP15_1 | ADC_SMPR1_SMP14_1 | \
+      ADC_SMPR1_SMP13_1 | ADC_SMPR1_SMP12_1 | ADC_SMPR1_SMP11_1 | ADC_SMPR1_SMP10_1 )
+
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0                                          \
+     (ADC_SMPR2_SMP9_0 | ADC_SMPR2_SMP8_0 | ADC_SMPR2_SMP7_0 | ADC_SMPR2_SMP6_0 |     \
+      ADC_SMPR2_SMP5_0 | ADC_SMPR2_SMP4_0 | ADC_SMPR2_SMP3_0 | ADC_SMPR2_SMP2_0 |     \
+      ADC_SMPR2_SMP1_0 | ADC_SMPR2_SMP0_0)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0                                          \
+     (ADC_SMPR1_SMP17_0 | ADC_SMPR1_SMP16_0 | ADC_SMPR1_SMP15_0 | ADC_SMPR1_SMP14_0 | \
+      ADC_SMPR1_SMP13_0 | ADC_SMPR1_SMP12_0 | ADC_SMPR1_SMP11_0 | ADC_SMPR1_SMP10_0 )
+
+#define ADC_SAMPLETIME_1CYCLE5_SMPR2ALLCHANNELS    0x00000000U
+#define ADC_SAMPLETIME_7CYCLES5_SMPR2ALLCHANNELS   (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_13CYCLES5_SMPR2ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1)
+#define ADC_SAMPLETIME_28CYCLES5_SMPR2ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_41CYCLES5_SMPR2ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2)
+#define ADC_SAMPLETIME_55CYCLES5_SMPR2ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_71CYCLES5_SMPR2ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1)
+#define ADC_SAMPLETIME_239CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+
+#define ADC_SAMPLETIME_1CYCLE5_SMPR1ALLCHANNELS    0x00000000U
+#define ADC_SAMPLETIME_7CYCLES5_SMPR1ALLCHANNELS   (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_13CYCLES5_SMPR1ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1)
+#define ADC_SAMPLETIME_28CYCLES5_SMPR1ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_41CYCLES5_SMPR1ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2)
+#define ADC_SAMPLETIME_55CYCLES5_SMPR1ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_71CYCLES5_SMPR1ALLCHANNELS  (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1)
+#define ADC_SAMPLETIME_239CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+/**
+  * @}
+  */
+
+/* Combination of all post-conversion flags bits: EOC/EOS, JEOC/JEOS, OVR, AWDx */
+#define ADC_FLAG_POSTCONV_ALL   (ADC_FLAG_EOC | ADC_FLAG_JEOC | ADC_FLAG_AWD )
+
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+  * @{
+  */
+/* Macro for internal HAL driver usage, and possibly can be used into code of */
+/* final user.                                                                */    
+
+/**
+  * @brief Enable the ADC peripheral
+  * @note ADC enable requires a delay for ADC stabilization time
+  *       (refer to device datasheet, parameter tSTAB)
+  * @note On STM32F1, if ADC is already enabled this macro trigs a conversion 
+  *       SW start on regular group.
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#define __HAL_ADC_ENABLE(__HANDLE__)                                           \
+  (SET_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_ADON)))
+    
+/**
+  * @brief Disable the ADC peripheral
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#define __HAL_ADC_DISABLE(__HANDLE__)                                          \
+  (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_ADON)))
+    
+/** @brief Enable the ADC end of conversion interrupt.
+  * @param __HANDLE__: ADC handle
+  * @param __INTERRUPT__: ADC Interrupt
+  *          This parameter can be any combination of the following values:
+  *            @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+  *            @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source
+  *            @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+  * @retval None
+  */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__)                         \
+  (SET_BIT((__HANDLE__)->Instance->CR1, (__INTERRUPT__)))
+    
+/** @brief Disable the ADC end of conversion interrupt.
+  * @param __HANDLE__: ADC handle
+  * @param __INTERRUPT__: ADC Interrupt
+  *          This parameter can be any combination of the following values:
+  *            @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+  *            @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source
+  *            @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+  * @retval None
+  */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__)                        \
+  (CLEAR_BIT((__HANDLE__)->Instance->CR1, (__INTERRUPT__)))
+
+/** @brief  Checks if the specified ADC interrupt source is enabled or disabled.
+  * @param __HANDLE__: ADC handle
+  * @param __INTERRUPT__: ADC interrupt source to check
+  *          This parameter can be any combination of the following values:
+  *            @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+  *            @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source
+  *            @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+  * @retval None
+  */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)                     \
+  (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Get the selected ADC's flag status.
+  * @param __HANDLE__: ADC handle
+  * @param __FLAG__: ADC flag
+  *          This parameter can be any combination of the following values:
+  *            @arg ADC_FLAG_STRT: ADC Regular group start flag
+  *            @arg ADC_FLAG_JSTRT: ADC Injected group start flag
+  *            @arg ADC_FLAG_EOC: ADC End of Regular conversion flag
+  *            @arg ADC_FLAG_JEOC: ADC End of Injected conversion flag
+  *            @arg ADC_FLAG_AWD: ADC Analog watchdog flag
+  * @retval None
+  */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__)                               \
+  ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+    
+/** @brief Clear the ADC's pending flags
+  * @param __HANDLE__: ADC handle
+  * @param __FLAG__: ADC flag
+  *          This parameter can be any combination of the following values:
+  *            @arg ADC_FLAG_STRT: ADC Regular group start flag
+  *            @arg ADC_FLAG_JSTRT: ADC Injected group start flag
+  *            @arg ADC_FLAG_EOC: ADC End of Regular conversion flag
+  *            @arg ADC_FLAG_JEOC: ADC End of Injected conversion flag
+  *            @arg ADC_FLAG_AWD: ADC Analog watchdog flag
+  * @retval None
+  */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__)                             \
+  (WRITE_REG((__HANDLE__)->Instance->SR, ~(__FLAG__)))
+
+/** @brief  Reset ADC handle state
+  * @param  __HANDLE__: ADC handle
+  * @retval None
+  */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__)                               \
+  do{                                                                          \
+     (__HANDLE__)->State = HAL_ADC_STATE_RESET;                                \
+     (__HANDLE__)->MspInitCallback = NULL;                                     \
+     (__HANDLE__)->MspDeInitCallback = NULL;                                   \
+    } while(0)
+#else
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__)                               \
+  ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+#endif
+
+/**
+  * @}
+  */
+
+/* Private macro ------------------------------------------------------------*/
+
+/** @defgroup ADC_Private_Macros ADC Private Macros
+  * @{
+  */
+/* Macro reserved for internal HAL driver usage, not intended to be used in   */
+/* code of final user.                                                        */
+
+/**
+  * @brief Verification of ADC state: enabled or disabled
+  * @param __HANDLE__: ADC handle
+  * @retval SET (ADC enabled) or RESET (ADC disabled)
+  */
+#define ADC_IS_ENABLE(__HANDLE__)                                              \
+  ((( ((__HANDLE__)->Instance->CR2 & ADC_CR2_ADON) == ADC_CR2_ADON )           \
+   ) ? SET : RESET)
+
+/**
+  * @brief Test if conversion trigger of regular group is software start
+  *        or external trigger.
+  * @param __HANDLE__: ADC handle
+  * @retval SET (software start) or RESET (external trigger)
+  */
+#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__)                              \
+  (READ_BIT((__HANDLE__)->Instance->CR2, ADC_CR2_EXTSEL) == ADC_SOFTWARE_START)
+
+/**
+  * @brief Test if conversion trigger of injected group is software start
+  *        or external trigger.
+  * @param __HANDLE__: ADC handle
+  * @retval SET (software start) or RESET (external trigger)
+  */
+#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__)                             \
+  (READ_BIT((__HANDLE__)->Instance->CR2, ADC_CR2_JEXTSEL) == ADC_INJECTED_SOFTWARE_START)
+
+/**
+  * @brief Simultaneously clears and sets specific bits of the handle State
+  * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(),
+  *        the first parameter is the ADC handle State, the second parameter is the
+  *        bit field to clear, the third and last parameter is the bit field to set.
+  * @retval None
+  */
+#define ADC_STATE_CLR_SET MODIFY_REG
+
+/**
+  * @brief Clear ADC error code (set it to error code: "no error")
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#define ADC_CLEAR_ERRORCODE(__HANDLE__)                                        \
+  ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+
+/**
+  * @brief Set ADC number of conversions into regular channel sequence length.
+  * @param _NbrOfConversion_: Regular channel sequence length 
+  * @retval None
+  */
+#define ADC_SQR1_L_SHIFT(_NbrOfConversion_)                                    \
+  (((_NbrOfConversion_) - (uint8_t)1) << ADC_SQR1_L_Pos)
+
+/**
+  * @brief Set the ADC's sample time for channel numbers between 10 and 18.
+  * @param _SAMPLETIME_: Sample time parameter.
+  * @param _CHANNELNB_: Channel number.  
+  * @retval None
+  */
+#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_)                                   \
+  ((_SAMPLETIME_) << (ADC_SMPR1_SMP11_Pos * ((_CHANNELNB_) - 10)))
+
+/**
+  * @brief Set the ADC's sample time for channel numbers between 0 and 9.
+  * @param _SAMPLETIME_: Sample time parameter.
+  * @param _CHANNELNB_: Channel number.  
+  * @retval None
+  */
+#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_)                                   \
+  ((_SAMPLETIME_) << (ADC_SMPR2_SMP1_Pos * (_CHANNELNB_)))
+
+/**
+  * @brief Set the selected regular channel rank for rank between 1 and 6.
+  * @param _CHANNELNB_: Channel number.
+  * @param _RANKNB_: Rank number.    
+  * @retval None
+  */
+#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_)                                     \
+  ((_CHANNELNB_) << (ADC_SQR3_SQ2_Pos * ((_RANKNB_) - 1)))
+
+/**
+  * @brief Set the selected regular channel rank for rank between 7 and 12.
+  * @param _CHANNELNB_: Channel number.
+  * @param _RANKNB_: Rank number.    
+  * @retval None
+  */
+#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_)                                     \
+  ((_CHANNELNB_) << (ADC_SQR2_SQ8_Pos * ((_RANKNB_) - 7)))
+
+/**
+  * @brief Set the selected regular channel rank for rank between 13 and 16.
+  * @param _CHANNELNB_: Channel number.
+  * @param _RANKNB_: Rank number.    
+  * @retval None
+  */
+#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_)                                     \
+  ((_CHANNELNB_) << (ADC_SQR1_SQ14_Pos * ((_RANKNB_) - 13)))
+
+/**
+  * @brief Set the injected sequence length.
+  * @param _JSQR_JL_: Sequence length.
+  * @retval None
+  */
+#define ADC_JSQR_JL_SHIFT(_JSQR_JL_)                                           \
+  (((_JSQR_JL_) -1) << ADC_JSQR_JL_Pos)
+
+/**
+  * @brief Set the selected injected channel rank
+  *        Note: on STM32F1 devices, channel rank position in JSQR register
+  *              is depending on total number of ranks selected into
+  *              injected sequencer (ranks sequence starting from 4-JL)
+  * @param _CHANNELNB_: Channel number.
+  * @param _RANKNB_: Rank number.
+  * @param _JSQR_JL_: Sequence length.
+  * @retval None
+  */
+#define ADC_JSQR_RK_JL(_CHANNELNB_, _RANKNB_, _JSQR_JL_)                       \
+  ((_CHANNELNB_) << (ADC_JSQR_JSQ2_Pos * ((4 - ((_JSQR_JL_) - (_RANKNB_))) - 1)))
+
+/**
+  * @brief Enable ADC continuous conversion mode.
+  * @param _CONTINUOUS_MODE_: Continuous mode.
+  * @retval None
+  */
+#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_)                                  \
+  ((_CONTINUOUS_MODE_) << ADC_CR2_CONT_Pos)
+
+/**
+  * @brief Configures the number of discontinuous conversions for the regular group channels.
+  * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions.
+  * @retval None
+  */
+#define ADC_CR1_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_)                    \
+  (((_NBR_DISCONTINUOUS_CONV_) - 1) << ADC_CR1_DISCNUM_Pos)
+
+/**
+  * @brief Enable ADC scan mode to convert multiple ranks with sequencer.
+  * @param _SCAN_MODE_: Scan conversion mode.
+  * @retval None
+  */
+/* Note: Scan mode is compared to ENABLE for legacy purpose, this parameter   */
+/*       is equivalent to ADC_SCAN_ENABLE.                                    */
+#define ADC_CR1_SCAN_SET(_SCAN_MODE_)                                          \
+  (( ((_SCAN_MODE_) == ADC_SCAN_ENABLE) || ((_SCAN_MODE_) == ENABLE)           \
+   )? (ADC_SCAN_ENABLE) : (ADC_SCAN_DISABLE)                                   \
+  )
+
+/**
+  * @brief Get the maximum ADC conversion cycles on all channels.
+  * Returns the selected sampling time + conversion time (12.5 ADC clock cycles)
+  * Approximation of sampling time within 4 ranges, returns the highest value:
+  *   below 7.5 cycles {1.5 cycle; 7.5 cycles},
+  *   between 13.5 cycles and 28.5 cycles {13.5 cycles; 28.5 cycles}
+  *   between 41.5 cycles and 71.5 cycles {41.5 cycles; 55.5 cycles; 71.5cycles}
+  *   equal to 239.5 cycles
+  * Unit: ADC clock cycles
+  * @param __HANDLE__: ADC handle
+  * @retval ADC conversion cycles on all channels
+  */   
+#define ADC_CONVCYCLES_MAX_RANGE(__HANDLE__)                                                                     \
+    (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET)  &&                     \
+       (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) ) ?                     \
+                                                                                                                 \
+          (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET)  &&               \
+             (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET) ) ?               \
+               ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_7CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_28CYCLES5)   \
+          :                                                                                                      \
+          ((((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET)  &&               \
+             (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET)) ||               \
+            ((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET)  &&               \
+             (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET))) ?               \
+               ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_71CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_239CYCLES5) \
+     )
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+                                  ((ALIGN) == ADC_DATAALIGN_LEFT)    )
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \
+                                     ((SCAN_MODE) == ADC_SCAN_ENABLE)    )
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE)  || \
+                                   ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING)  )
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_1)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_2)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_3)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_4)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_5)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_6)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_7)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_8)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_9)           || \
+                                 ((CHANNEL) == ADC_CHANNEL_10)          || \
+                                 ((CHANNEL) == ADC_CHANNEL_11)          || \
+                                 ((CHANNEL) == ADC_CHANNEL_12)          || \
+                                 ((CHANNEL) == ADC_CHANNEL_13)          || \
+                                 ((CHANNEL) == ADC_CHANNEL_14)          || \
+                                 ((CHANNEL) == ADC_CHANNEL_15)          || \
+                                 ((CHANNEL) == ADC_CHANNEL_16)          || \
+                                 ((CHANNEL) == ADC_CHANNEL_17)            )
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5)    || \
+                                  ((TIME) == ADC_SAMPLETIME_7CYCLES_5)   || \
+                                  ((TIME) == ADC_SAMPLETIME_13CYCLES_5)  || \
+                                  ((TIME) == ADC_SAMPLETIME_28CYCLES_5)  || \
+                                  ((TIME) == ADC_SAMPLETIME_41CYCLES_5)  || \
+                                  ((TIME) == ADC_SAMPLETIME_55CYCLES_5)  || \
+                                  ((TIME) == ADC_SAMPLETIME_71CYCLES_5)  || \
+                                  ((TIME) == ADC_SAMPLETIME_239CYCLES_5)   )
+
+#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_10) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_11) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_12) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_13) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_14) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_15) || \
+                                      ((CHANNEL) == ADC_REGULAR_RANK_16)   )
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE)             || \
+                                               ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG)       || \
+                                               ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC)     || \
+                                               ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC)  || \
+                                               ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG)          || \
+                                               ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC)        || \
+                                               ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC)       )
+
+#define IS_ADC_CONVERSION_GROUP(CONVERSION) (((CONVERSION) == ADC_REGULAR_GROUP)         || \
+                                             ((CONVERSION) == ADC_INJECTED_GROUP)        || \
+                                             ((CONVERSION) == ADC_REGULAR_INJECTED_GROUP)  )
+
+#define IS_ADC_EVENT_TYPE(EVENT) ((EVENT) == ADC_AWD_EVENT)
+
+
+/** @defgroup ADC_range_verification ADC range verification
+  * For a unique ADC resolution: 12 bits
+  * @{
+  */
+#define IS_ADC_RANGE(ADC_VALUE) ((ADC_VALUE) <= 0x0FFFU)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_regular_nb_conv_verification ADC regular nb conv verification
+  * @{
+  */
+#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 16U))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_regular_discontinuous_mode_number_verification ADC regular discontinuous mode number verification
+  * @{
+  */
+#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= 1U) && ((NUMBER) <= 8U))
+/**
+  * @}
+  */
+      
+/**
+  * @}
+  */
+    
+/* Include ADC HAL Extension module */
+#include "stm32f1xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+  * @{
+  */
+
+
+/* Initialization and de-initialization functions  **********************************/
+HAL_StatusTypeDef       HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void                    HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void                    HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* IO operation functions  *****************************************************/
+
+/** @addtogroup ADC_Exported_Functions_Group2
+  * @{
+  */
+
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef       HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef       HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef       HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+/* Non-blocking mode: DMA */
+HAL_StatusTypeDef       HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef       HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t                HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
+void                    HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+void                    HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void                    HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void                    HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void                    HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+  * @}
+  */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADC_Exported_Functions_Group3
+  * @{
+  */
+HAL_StatusTypeDef       HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef       HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+  * @}
+  */
+
+
+/* Peripheral State functions *************************************************/
+/** @addtogroup ADC_Exported_Functions_Group4
+  * @{
+  */
+uint32_t                HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t                HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+
+/* Internal HAL driver functions **********************************************/
+/** @addtogroup ADC_Private_Functions
+  * @{
+  */
+HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef ADC_ConversionStop_Disable(ADC_HandleTypeDef* hadc);
+void              ADC_StabilizationTime(uint32_t DelayUs);
+void              ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
+void              ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
+void              ADC_DMAError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */ 
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F1xx_HAL_ADC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h

@@ -0,0 +1,710 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_adc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of ADC HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_ADC_EX_H
+#define __STM32F1xx_HAL_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"  
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADCEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup ADCEx_Exported_Types ADCEx Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  ADC Configuration injected Channel structure definition
+  * @note   Parameters of this structure are shared within 2 scopes:
+  *          - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+  *          - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+  *            AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+  * @note   The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+  *         ADC state can be either:
+  *          - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ExternalTrigInjecConv')
+  *          - For all except parameters 'ExternalTrigInjecConv': ADC enabled without conversion on going on injected group.
+  */
+typedef struct 
+{
+  uint32_t InjectedChannel;                       /*!< Selection of ADC channel to configure
+                                                       This parameter can be a value of @ref ADC_channels
+                                                       Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability.
+                                                       Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor)
+                                                       Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger.
+                                                             It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel.
+                                                             Refer to errata sheet of these devices for more details. */
+  uint32_t InjectedRank;                          /*!< Rank in the injected group sequencer
+                                                       This parameter must be a value of @ref ADCEx_injected_rank
+                                                       Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+  uint32_t InjectedSamplingTime;                  /*!< Sampling time value to be set for the selected channel.
+                                                       Unit: ADC clock cycles
+                                                       Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+                                                       This parameter can be a value of @ref ADC_sampling_times
+                                                       Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+                                                                If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+                                                       Note: In case of usage of internal measurement channels (VrefInt/TempSensor),
+                                                             sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+                                                             Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */
+  uint32_t InjectedOffset;                        /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+                                                       Offset value must be a positive number.
+                                                       Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+                                                       this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+  uint32_t InjectedNbrOfConversion;               /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+                                                       To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+                                                       This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+                                                       Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                                configure a channel on injected group can impact the configuration of other channels previously set. */
+  FunctionalState InjectedDiscontinuousConvMode;  /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+                                                       Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                                       Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+                                                       This parameter can be set to ENABLE or DISABLE.
+                                                       Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+                                                       Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                                configure a channel on injected group can impact the configuration of other channels previously set. */
+  FunctionalState AutoInjectedConv;               /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+                                                       This parameter can be set to ENABLE or DISABLE.
+                                                       Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+                                                       Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+                                                       Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+                                                             To maintain JAUTO always enabled, DMA must be configured in circular mode.
+                                                       Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                                configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConv;                 /*!< Selects the external event used to trigger the conversion start of injected group.
+                                                       If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+                                                       If set to external trigger source, triggering is on event rising edge.
+                                                       This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
+                                                       Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+                                                             If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+                                                       Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                                configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/** 
+  * @brief  Structure definition of ADC multimode
+  * @note   The setting of these parameters with function HAL_ADCEx_MultiModeConfigChannel() is conditioned to ADCs state (both ADCs of the common group).
+  *         State of ADCs of the common group must be: disabled.
+  */
+typedef struct
+{
+  uint32_t Mode;              /*!< Configures the ADC to operate in independent or multi mode. 
+                                   This parameter can be a value of @ref ADCEx_Common_mode
+                                   Note: In dual mode, a change of channel configuration generates a restart that can produce a loss of synchronization. It is recommended to disable dual mode before any configuration change.
+                                   Note: In case of simultaneous mode used: Exactly the same sampling time should be configured for the 2 channels that will be sampled simultaneously by ACD1 and ADC2.
+                                   Note: In case of interleaved mode used: To avoid overlap between conversions, maximum sampling time allowed is 7 ADC clock cycles for fast interleaved mode and 14 ADC clock cycles for slow interleaved mode.
+                                   Note: Some multimode parameters are fixed on STM32F1 and can be configured on other STM32 devices with several ADC (multimode configuration structure can have additional parameters).
+                                         The equivalences are:
+                                           - Parameter 'DMAAccessMode': On STM32F1, this parameter is fixed to 1 DMA channel (one DMA channel for both ADC, DMA of ADC master). On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_DMAACCESSMODE_12_10_BITS'.
+                                           - Parameter 'TwoSamplingDelay': On STM32F1, this parameter is fixed to 7 or 14 ADC clock cycles depending on fast or slow interleaved mode selected. On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_TWOSAMPLINGDELAY_7CYCLES' (for fast interleaved mode). */
+
+  
+}ADC_MultiModeTypeDef;                                                          
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @}
+  */
+
+
+/* Exported constants --------------------------------------------------------*/
+   
+/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup ADCEx_injected_rank ADCEx rank into injected group
+  * @{
+  */
+#define ADC_INJECTED_RANK_1                           0x00000001U
+#define ADC_INJECTED_RANK_2                           0x00000002U
+#define ADC_INJECTED_RANK_3                           0x00000003U
+#define ADC_INJECTED_RANK_4                           0x00000004U
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADCEx external trigger enable for injected group
+  * @{
+  */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE           0x00000000U
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING         ((uint32_t)ADC_CR2_JEXTTRIG)
+/**
+  * @}
+  */
+    
+/** @defgroup ADC_External_trigger_source_Regular ADC External trigger selection for regular group
+  * @{
+  */
+/*!< List of external triggers with generic trigger name, independently of    */
+/* ADC target, sorted by trigger name:                                        */
+
+/*!< External triggers of regular group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGCONV_T1_CC1         ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2         ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T2_CC2         ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T3_TRGO        ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC4         ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_EXT_IT11       ADC1_2_EXTERNALTRIG_EXT_IT11
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/*!< External triggers of regular group for ADC3 only */
+#define ADC_EXTERNALTRIGCONV_T2_CC3         ADC3_EXTERNALTRIG_T2_CC3
+#define ADC_EXTERNALTRIGCONV_T3_CC1         ADC3_EXTERNALTRIG_T3_CC1
+#define ADC_EXTERNALTRIGCONV_T5_CC1         ADC3_EXTERNALTRIG_T5_CC1
+#define ADC_EXTERNALTRIGCONV_T5_CC3         ADC3_EXTERNALTRIG_T5_CC3
+#define ADC_EXTERNALTRIGCONV_T8_CC1         ADC3_EXTERNALTRIG_T8_CC1
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/*!< External triggers of regular group for all ADC instances */
+#define ADC_EXTERNALTRIGCONV_T1_CC3         ADC1_2_3_EXTERNALTRIG_T1_CC3
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/*!< Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and   */
+/*         XL-density devices.                                                */
+/*         To use it on ADC or ADC2, a remap of trigger must be done from     */
+/*         EXTI line 11 to TIM8_TRGO with macro:                              */
+/*           __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE()                           */
+/*           __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE()                           */
+
+/* Note for internal constant value management: If TIM8_TRGO is available,    */
+/* its definition is set to value for ADC1&ADC2 by default and changed to     */
+/* value for ADC3 by HAL ADC driver if ADC3 is selected.                      */
+#define ADC_EXTERNALTRIGCONV_T8_TRGO        ADC1_2_EXTERNALTRIG_T8_TRGO
+#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#define ADC_SOFTWARE_START                  ADC1_2_3_SWSTART
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger selection for injected group
+  * @{
+  */
+/*!< List of external triggers with generic trigger name, independently of    */
+/* ADC target, sorted by trigger name:                                        */
+
+/*!< External triggers of injected group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO        ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1         ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4         ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO        ADC1_2_EXTERNALTRIGINJEC_T4_TRGO 
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15       ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/*!< External triggers of injected group for ADC3 only */
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3         ADC3_EXTERNALTRIGINJEC_T4_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2         ADC3_EXTERNALTRIGINJEC_T8_CC2
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO        ADC3_EXTERNALTRIGINJEC_T5_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4         ADC3_EXTERNALTRIGINJEC_T5_CC4
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/*!< External triggers of injected group for all ADC instances */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4         ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO        ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/*!< Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and    */
+/*         XL-density devices.                                                */
+/*         To use it on ADC1 or ADC2, a remap of trigger must be done from    */
+/*         EXTI line 11 to TIM8_CC4 with macro:                               */
+/*           __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE()                           */
+/*           __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE()                           */
+
+/* Note for internal constant value management: If TIM8_CC4 is available,     */
+/* its definition is set to value for ADC1&ADC2 by default and changed to     */
+/* value for ADC3 by HAL ADC driver if ADC3 is selected.                      */
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4         ADC1_2_EXTERNALTRIGINJEC_T8_CC4
+#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#define ADC_INJECTED_SOFTWARE_START              ADC1_2_3_JSWSTART
+/**
+  * @}
+  */
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/** @defgroup ADCEx_Common_mode ADC Extended Dual ADC Mode
+  * @{
+  */
+#define ADC_MODE_INDEPENDENT                              0x00000000U                                                                     /*!< ADC dual mode disabled (ADC independent mode) */
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT    ((uint32_t)(                                                            ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined regular simultaneous + injected simultaneous mode, on groups regular and injected */
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG      ((uint32_t)(                                        ADC_CR1_DUALMOD_1                    )) /*!< ADC dual mode enabled: Combined regular simultaneous + alternate trigger mode, on groups regular and injected */
+#define ADC_DUALMODE_INJECSIMULT_INTERLFAST   ((uint32_t)(                                        ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined injected simultaneous + fast interleaved mode, on groups regular and injected (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INJECSIMULT_INTERLSLOW   ((uint32_t)(                    ADC_CR1_DUALMOD_2                                        )) /*!< ADC dual mode enabled: Combined injected simultaneous + slow Interleaved mode, on groups regular and injected (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INJECSIMULT              ((uint32_t)(                    ADC_CR1_DUALMOD_2 |                     ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Injected simultaneous mode, on group injected */
+#define ADC_DUALMODE_REGSIMULT                ((uint32_t)(                    ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1                    )) /*!< ADC dual mode enabled: Regular simultaneous mode, on group regular */
+#define ADC_DUALMODE_INTERLFAST               ((uint32_t)(                    ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Fast interleaved mode, on group regular (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INTERLSLOW               ((uint32_t)(ADC_CR1_DUALMOD_3                                                            )) /*!< ADC dual mode enabled: Slow interleaved mode, on group regular (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_ALTERTRIG                ((uint32_t)(ADC_CR1_DUALMOD_3 |                                         ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Alternate trigger mode, on group injected */
+/**
+  * @}
+  */
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @}
+  */
+
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup ADCEx_Private_Constants ADCEx Private Constants
+  * @{
+  */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular ADC Extended Internal HAL driver trigger selection for regular group
+  * @{
+  */
+/* List of external triggers of regular group for ADC1, ADC2, ADC3 (if ADC    */
+/* instance is available on the selected device).                             */
+/* (used internally by HAL driver. To not use into HAL structure parameters)  */
+
+/* External triggers of regular group for ADC1&ADC2 (if ADCx available) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1                       0x00000000U
+#define ADC1_2_EXTERNALTRIG_T1_CC2           ((uint32_t)(                                      ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T2_CC2           ((uint32_t)(                   ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO          ((uint32_t)(ADC_CR2_EXTSEL_2                                      ))
+#define ADC1_2_EXTERNALTRIG_T4_CC4           ((uint32_t)(ADC_CR2_EXTSEL_2 |                    ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11         ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1                   ))
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG)
+/* Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and     */
+/* XL-density devices.                                                        */
+#define ADC1_2_EXTERNALTRIG_T8_TRGO          ADC1_2_EXTERNALTRIG_EXT_IT11
+#endif
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/* External triggers of regular group for ADC3 */
+#define ADC3_EXTERNALTRIG_T3_CC1             ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC3_EXTERNALTRIG_T2_CC3             ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC3_EXTERNALTRIG_T8_CC1             ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC3_EXTERNALTRIG_T8_TRGO            ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC3_EXTERNALTRIG_T5_CC1             ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC3_EXTERNALTRIG_T5_CC3             ADC1_2_EXTERNALTRIG_EXT_IT11
+#endif
+
+/* External triggers of regular group for ADC1&ADC2&ADC3 (if ADCx available) */
+#define ADC1_2_3_EXTERNALTRIG_T1_CC3         ((uint32_t)(                   ADC_CR2_EXTSEL_1                   ))
+#define ADC1_2_3_SWSTART                     ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADC Extended Internal HAL driver trigger selection for injected group
+  * @{
+  */
+/* List of external triggers of injected group for ADC1, ADC2, ADC3 (if ADC    */
+/* instance is available on the selected device).                             */
+/* (used internally by HAL driver. To not use into HAL structure parameters)  */
+
+/* External triggers of injected group for ADC1&ADC2 (if ADCx available) */
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO          ((uint32_t)(                    ADC_CR2_JEXTSEL_1                    ))
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1           ((uint32_t)(                    ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4           ((uint32_t)(ADC_CR2_JEXTSEL_2                                        ))
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO          ((uint32_t)(ADC_CR2_JEXTSEL_2 |                     ADC_CR2_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15         ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1                    ))
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG)
+/* Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and      */
+/* XL-density devices.                                                        */
+#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4           ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+#endif
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/* External triggers of injected group for ADC3 */
+#define ADC3_EXTERNALTRIGINJEC_T4_CC3             ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC3_EXTERNALTRIGINJEC_T8_CC2             ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC3_EXTERNALTRIGINJEC_T8_CC4             ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC3_EXTERNALTRIGINJEC_T5_TRGO            ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC3_EXTERNALTRIGINJEC_T5_CC4             ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/* External triggers of injected group for ADC1&ADC2&ADC3 (if ADCx available) */
+#define ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO                    0x00000000U
+#define ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4         ((uint32_t)(                                        ADC_CR2_JEXTSEL_0))
+#define ADC1_2_3_JSWSTART                         ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup ADCEx_Private_Macro ADCEx Private Macro
+  * @{
+  */
+/* Macro reserved for internal HAL driver usage, not intended to be used in   */
+/* code of final user.                                                        */
+
+    
+/**
+  * @brief For devices with 3 ADCs: Defines the external trigger source 
+  *        for regular group according to ADC into common group ADC1&ADC2 or 
+  *        ADC3 (some triggers with same source have different value to
+  *        be programmed into ADC EXTSEL bits of CR2 register).
+  *        For devices with 2 ADCs or less: this macro makes no change.
+  * @param __HANDLE__: ADC handle
+  * @param __EXT_TRIG_CONV__: External trigger selected for regular group.
+  * @retval External trigger to be programmed into EXTSEL bits of CR2 register
+  */
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__)                         \
+ (( (((__HANDLE__)->Instance) == ADC3)                                         \
+  )?                                                                           \
+   ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO                     \
+     )?                                                                        \
+      (ADC3_EXTERNALTRIG_T8_TRGO)                                              \
+      :                                                                        \
+      (__EXT_TRIG_CONV__)                                                      \
+   )                                                                           \
+   :                                                                           \
+   (__EXT_TRIG_CONV__)                                                         \
+ )
+#else
+#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__)                         \
+  (__EXT_TRIG_CONV__)
+#endif /* STM32F103xE || STM32F103xG */
+
+/**
+  * @brief For devices with 3 ADCs: Defines the external trigger source 
+  *        for injected group according to ADC into common group ADC1&ADC2 or 
+  *        ADC3 (some triggers with same source have different value to
+  *        be programmed into ADC JEXTSEL bits of CR2 register).
+  *        For devices with 2 ADCs or less: this macro makes no change.
+  * @param __HANDLE__: ADC handle
+  * @param __EXT_TRIG_INJECTCONV__: External trigger selected for injected group.
+  * @retval External trigger to be programmed into JEXTSEL bits of CR2 register
+  */
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__)                  \
+ (( (((__HANDLE__)->Instance) == ADC3)                                         \
+  )?                                                                           \
+   ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4           \
+     )?                                                                        \
+      (ADC3_EXTERNALTRIGINJEC_T8_CC4)                                          \
+      :                                                                        \
+      (__EXT_TRIG_INJECTCONV__)                                                \
+   )                                                                           \
+   :                                                                           \
+   (__EXT_TRIG_INJECTCONV__)                                                   \
+ )
+#else
+#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__)                  \
+   (__EXT_TRIG_INJECTCONV__)
+#endif /* STM32F103xE || STM32F103xG */
+
+
+/**
+  * @brief Verification if multimode is enabled for the selected ADC (multimode ADC master or ADC slave) (applicable for devices with several ADCs)
+  * @param __HANDLE__: ADC handle
+  * @retval Multimode state: RESET if multimode is disabled, other value if multimode is enabled
+  */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__)                                    \
+ (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)   \
+  )?                                                                           \
+   (ADC1->CR1 & ADC_CR1_DUALMOD)                                               \
+   :                                                                           \
+   (RESET)                                                                     \
+ )
+#else
+#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__)                                    \
+  (RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @brief Verification of condition for ADC start conversion: ADC must be in non-multimode, or multimode with handle of ADC master (applicable for devices with several ADCs)
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__)                        \
+  (( (((__HANDLE__)->Instance) == ADC2)                                        \
+   )?                                                                          \
+    ((ADC1->CR1 & ADC_CR1_DUALMOD) == RESET)                                   \
+    :                                                                          \
+    (!RESET)                                                                   \
+  )
+#else
+#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__)                        \
+  (!RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @brief Check ADC multimode setting: In case of multimode, check whether ADC master of the selected ADC has feature auto-injection enabled (applicable for devices with several ADCs)
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__)                                \
+  (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)  \
+   )?                                                                          \
+    (ADC1->CR1 & ADC_CR1_JAUTO)                                                \
+    :                                                                          \
+    (RESET)                                                                    \
+  )
+#else
+#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__)                                \
+  (RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/**
+  * @brief Set handle of the other ADC sharing the common multimode settings
+  * @param __HANDLE__: ADC handle
+  * @param __HANDLE_OTHER_ADC__: other ADC handle
+  * @retval None
+  */
+#define ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__)                 \
+  ((__HANDLE_OTHER_ADC__)->Instance = ADC2)
+
+/**
+  * @brief Set handle of the ADC slave associated to the ADC master
+  * On STM32F1 devices, ADC slave is always ADC2 (this can be different
+  * on other STM32 devices)
+  * @param __HANDLE_MASTER__: ADC master handle
+  * @param __HANDLE_SLAVE__: ADC slave handle
+  * @retval None
+  */
+#define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__)                   \
+  ((__HANDLE_SLAVE__)->Instance = ADC2)
+       
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
+                                       ((CHANNEL) == ADC_INJECTED_RANK_2) || \
+                                       ((CHANNEL) == ADC_INJECTED_RANK_3) || \
+                                       ((CHANNEL) == ADC_INJECTED_RANK_4))
+
+#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE)  || \
+                                        ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING))
+
+/** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification
+  * @{
+  */
+#define IS_ADC_INJECTED_NB_CONV(LENGTH)  (((LENGTH) >= 1U) && ((LENGTH) <= 4U))
+/**
+  * @}
+  */
+
+#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO)   || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11)  || \
+                                 ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F101xE)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO)   || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11)  || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO)   || \
+                                 ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F101xG)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO)   || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11)  || \
+                                 ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO)   || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11)  || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO)   || \
+                                 ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+
+#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                      ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F101xE)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4)   || \
+                                      ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F101xG)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                      ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4)   || \
+                                      ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT)                || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT)  || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG)    || \
+                           ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLFAST) || \
+                           ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLSLOW) || \
+                           ((MODE) == ADC_DUALMODE_INJECSIMULT)            || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT)              || \
+                           ((MODE) == ADC_DUALMODE_INTERLFAST)             || \
+                           ((MODE) == ADC_DUALMODE_INTERLSLOW)             || \
+                           ((MODE) == ADC_DUALMODE_ALTERTRIG) )
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @}
+  */      
+   
+    
+
+    
+    
+   
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+  * @{
+  */
+
+/* IO operation functions  *****************************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* ADC calibration */
+HAL_StatusTypeDef       HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef       HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef       HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/* ADC multimode */
+HAL_StatusTypeDef       HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef       HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc); 
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t                HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+uint32_t                HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc);
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
+void                    HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+/**
+  * @}
+  */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef       HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+HAL_StatusTypeDef       HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode);
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h

@@ -0,0 +1,850 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_can.h
+  * @author  MCD Application Team
+  * @brief   Header file of CAN HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_CAN_H
+#define STM32F1xx_HAL_CAN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+#if defined (CAN1)
+/** @addtogroup CAN
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+  * @{
+  */
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_CAN_STATE_RESET             = 0x00U,  /*!< CAN not yet initialized or disabled */
+  HAL_CAN_STATE_READY             = 0x01U,  /*!< CAN initialized and ready for use   */
+  HAL_CAN_STATE_LISTENING         = 0x02U,  /*!< CAN receive process is ongoing      */
+  HAL_CAN_STATE_SLEEP_PENDING     = 0x03U,  /*!< CAN sleep request is pending        */
+  HAL_CAN_STATE_SLEEP_ACTIVE      = 0x04U,  /*!< CAN sleep mode is active            */
+  HAL_CAN_STATE_ERROR             = 0x05U   /*!< CAN error state                     */
+
+} HAL_CAN_StateTypeDef;
+
+/**
+  * @brief  CAN init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;                  /*!< Specifies the length of a time quantum.
+                                            This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
+
+  uint32_t Mode;                       /*!< Specifies the CAN operating mode.
+                                            This parameter can be a value of @ref CAN_operating_mode */
+
+  uint32_t SyncJumpWidth;              /*!< Specifies the maximum number of time quanta the CAN hardware
+                                            is allowed to lengthen or shorten a bit to perform resynchronization.
+                                            This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+  uint32_t TimeSeg1;                   /*!< Specifies the number of time quanta in Bit Segment 1.
+                                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+  uint32_t TimeSeg2;                   /*!< Specifies the number of time quanta in Bit Segment 2.
+                                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+  FunctionalState TimeTriggeredMode;   /*!< Enable or disable the time triggered communication mode.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState AutoBusOff;          /*!< Enable or disable the automatic bus-off management.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState AutoWakeUp;          /*!< Enable or disable the automatic wake-up mode.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState AutoRetransmission;  /*!< Enable or disable the non-automatic retransmission mode.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState ReceiveFifoLocked;   /*!< Enable or disable the Receive FIFO Locked mode.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState TransmitFifoPriority;/*!< Enable or disable the transmit FIFO priority.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+} CAN_InitTypeDef;
+
+/**
+  * @brief  CAN filter configuration structure definition
+  */
+typedef struct
+{
+  uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
+                                       configuration, first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
+                                       configuration, second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (MSBs for a 32-bit configuration,
+                                       first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (LSBs for a 32-bit configuration,
+                                       second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter.
+                                       This parameter can be a value of @ref CAN_filter_FIFO */
+
+  uint32_t FilterBank;            /*!< Specifies the filter bank which will be initialized.
+                                       For single CAN instance(14 dedicated filter banks),
+                                       this parameter must be a number between Min_Data = 0 and Max_Data = 13.
+                                       For dual CAN instances(28 filter banks shared),
+                                       this parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+  uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
+                                       This parameter can be a value of @ref CAN_filter_mode */
+
+  uint32_t FilterScale;           /*!< Specifies the filter scale.
+                                       This parameter can be a value of @ref CAN_filter_scale */
+
+  uint32_t FilterActivation;      /*!< Enable or disable the filter.
+                                       This parameter can be a value of @ref CAN_filter_activation */
+
+  uint32_t SlaveStartFilterBank;  /*!< Select the start filter bank for the slave CAN instance.
+                                       For single CAN instances, this parameter is meaningless.
+                                       For dual CAN instances, all filter banks with lower index are assigned to master
+                                       CAN instance, whereas all filter banks with greater index are assigned to slave
+                                       CAN instance.
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+} CAN_FilterTypeDef;
+
+/**
+  * @brief  CAN Tx message header structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;    /*!< Specifies the standard identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+  uint32_t ExtId;    /*!< Specifies the extended identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+  uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_identifier_type */
+
+  uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+  FunctionalState TransmitGlobalTime; /*!< Specifies whether the timestamp counter value captured on start
+                          of frame transmission, is sent in DATA6 and DATA7 replacing pData[6] and pData[7].
+                          @note: Time Triggered Communication Mode must be enabled.
+                          @note: DLC must be programmed as 8 bytes, in order these 2 bytes are sent.
+                          This parameter can be set to ENABLE or DISABLE. */
+
+} CAN_TxHeaderTypeDef;
+
+/**
+  * @brief  CAN Rx message header structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;    /*!< Specifies the standard identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+  uint32_t ExtId;    /*!< Specifies the extended identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+  uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_identifier_type */
+
+  uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+  uint32_t Timestamp; /*!< Specifies the timestamp counter value captured on start of frame reception.
+                          @note: Time Triggered Communication Mode must be enabled.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterMatchIndex; /*!< Specifies the index of matching acceptance filter element.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+} CAN_RxHeaderTypeDef;
+
+/**
+  * @brief  CAN handle Structure definition
+  */
+typedef struct __CAN_HandleTypeDef
+{
+  CAN_TypeDef                 *Instance;                 /*!< Register base address */
+
+  CAN_InitTypeDef             Init;                      /*!< CAN required parameters */
+
+  __IO HAL_CAN_StateTypeDef   State;                     /*!< CAN communication state */
+
+  __IO uint32_t               ErrorCode;                 /*!< CAN Error code.
+                                                              This parameter can be a value of @ref CAN_Error_Code */
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+  void (* TxMailbox0CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 0 complete callback    */
+  void (* TxMailbox1CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 1 complete callback    */
+  void (* TxMailbox2CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 2 complete callback    */
+  void (* TxMailbox0AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 0 abort callback       */
+  void (* TxMailbox1AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 1 abort callback       */
+  void (* TxMailbox2AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 2 abort callback       */
+  void (* RxFifo0MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 msg pending callback    */
+  void (* RxFifo0FullCallback)(struct __CAN_HandleTypeDef *hcan);       /*!< CAN Rx FIFO 0 full callback           */
+  void (* RxFifo1MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 msg pending callback    */
+  void (* RxFifo1FullCallback)(struct __CAN_HandleTypeDef *hcan);       /*!< CAN Rx FIFO 1 full callback           */
+  void (* SleepCallback)(struct __CAN_HandleTypeDef *hcan);             /*!< CAN Sleep callback                    */
+  void (* WakeUpFromRxMsgCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Wake Up from Rx msg callback      */
+  void (* ErrorCallback)(struct __CAN_HandleTypeDef *hcan);             /*!< CAN Error callback                    */
+
+  void (* MspInitCallback)(struct __CAN_HandleTypeDef *hcan);           /*!< CAN Msp Init callback                 */
+  void (* MspDeInitCallback)(struct __CAN_HandleTypeDef *hcan);         /*!< CAN Msp DeInit callback               */
+
+#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
+} CAN_HandleTypeDef;
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+/**
+  * @brief  HAL CAN common Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_CAN_TX_MAILBOX0_COMPLETE_CB_ID       = 0x00U,    /*!< CAN Tx Mailbox 0 complete callback ID         */
+  HAL_CAN_TX_MAILBOX1_COMPLETE_CB_ID       = 0x01U,    /*!< CAN Tx Mailbox 1 complete callback ID         */
+  HAL_CAN_TX_MAILBOX2_COMPLETE_CB_ID       = 0x02U,    /*!< CAN Tx Mailbox 2 complete callback ID         */
+  HAL_CAN_TX_MAILBOX0_ABORT_CB_ID          = 0x03U,    /*!< CAN Tx Mailbox 0 abort callback ID            */
+  HAL_CAN_TX_MAILBOX1_ABORT_CB_ID          = 0x04U,    /*!< CAN Tx Mailbox 1 abort callback ID            */
+  HAL_CAN_TX_MAILBOX2_ABORT_CB_ID          = 0x05U,    /*!< CAN Tx Mailbox 2 abort callback ID            */
+  HAL_CAN_RX_FIFO0_MSG_PENDING_CB_ID       = 0x06U,    /*!< CAN Rx FIFO 0 message pending callback ID     */
+  HAL_CAN_RX_FIFO0_FULL_CB_ID              = 0x07U,    /*!< CAN Rx FIFO 0 full callback ID                */
+  HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID       = 0x08U,    /*!< CAN Rx FIFO 1 message pending callback ID     */
+  HAL_CAN_RX_FIFO1_FULL_CB_ID              = 0x09U,    /*!< CAN Rx FIFO 1 full callback ID                */
+  HAL_CAN_SLEEP_CB_ID                      = 0x0AU,    /*!< CAN Sleep callback ID                         */
+  HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID         = 0x0BU,    /*!< CAN Wake Up from Rx msg callback ID          */
+  HAL_CAN_ERROR_CB_ID                      = 0x0CU,    /*!< CAN Error callback ID                         */
+
+  HAL_CAN_MSPINIT_CB_ID                    = 0x0DU,    /*!< CAN MspInit callback ID                       */
+  HAL_CAN_MSPDEINIT_CB_ID                  = 0x0EU,    /*!< CAN MspDeInit callback ID                     */
+
+} HAL_CAN_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL CAN Callback pointer definition
+  */
+typedef  void (*pCAN_CallbackTypeDef)(CAN_HandleTypeDef *hcan); /*!< pointer to a CAN callback function   */
+
+#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+  * @{
+  */
+
+/** @defgroup CAN_Error_Code CAN Error Code
+  * @{
+  */
+#define HAL_CAN_ERROR_NONE            (0x00000000U)  /*!< No error                                             */
+#define HAL_CAN_ERROR_EWG             (0x00000001U)  /*!< Protocol Error Warning                               */
+#define HAL_CAN_ERROR_EPV             (0x00000002U)  /*!< Error Passive                                        */
+#define HAL_CAN_ERROR_BOF             (0x00000004U)  /*!< Bus-off error                                        */
+#define HAL_CAN_ERROR_STF             (0x00000008U)  /*!< Stuff error                                          */
+#define HAL_CAN_ERROR_FOR             (0x00000010U)  /*!< Form error                                           */
+#define HAL_CAN_ERROR_ACK             (0x00000020U)  /*!< Acknowledgment error                                 */
+#define HAL_CAN_ERROR_BR              (0x00000040U)  /*!< Bit recessive error                                  */
+#define HAL_CAN_ERROR_BD              (0x00000080U)  /*!< Bit dominant error                                   */
+#define HAL_CAN_ERROR_CRC             (0x00000100U)  /*!< CRC error                                            */
+#define HAL_CAN_ERROR_RX_FOV0         (0x00000200U)  /*!< Rx FIFO0 overrun error                               */
+#define HAL_CAN_ERROR_RX_FOV1         (0x00000400U)  /*!< Rx FIFO1 overrun error                               */
+#define HAL_CAN_ERROR_TX_ALST0        (0x00000800U)  /*!< TxMailbox 0 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR0        (0x00001000U)  /*!< TxMailbox 0 transmit failure due to transmit error    */
+#define HAL_CAN_ERROR_TX_ALST1        (0x00002000U)  /*!< TxMailbox 1 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR1        (0x00004000U)  /*!< TxMailbox 1 transmit failure due to transmit error    */
+#define HAL_CAN_ERROR_TX_ALST2        (0x00008000U)  /*!< TxMailbox 2 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR2        (0x00010000U)  /*!< TxMailbox 2 transmit failure due to transmit error    */
+#define HAL_CAN_ERROR_TIMEOUT         (0x00020000U)  /*!< Timeout error                                        */
+#define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U)  /*!< Peripheral not initialized                           */
+#define HAL_CAN_ERROR_NOT_READY       (0x00080000U)  /*!< Peripheral not ready                                 */
+#define HAL_CAN_ERROR_NOT_STARTED     (0x00100000U)  /*!< Peripheral not started                               */
+#define HAL_CAN_ERROR_PARAM           (0x00200000U)  /*!< Parameter error                                      */
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+#define HAL_CAN_ERROR_INVALID_CALLBACK (0x00400000U) /*!< Invalid Callback error                               */
+#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
+#define HAL_CAN_ERROR_INTERNAL        (0x00800000U)  /*!< Internal error                                       */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+  * @{
+  */
+#define CAN_INITSTATUS_FAILED       (0x00000000U)  /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS      (0x00000001U)  /*!< CAN initialization OK     */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+  * @{
+  */
+#define CAN_MODE_NORMAL             (0x00000000U)                              /*!< Normal mode   */
+#define CAN_MODE_LOOPBACK           ((uint32_t)CAN_BTR_LBKM)                   /*!< Loopback mode */
+#define CAN_MODE_SILENT             ((uint32_t)CAN_BTR_SILM)                   /*!< Silent mode   */
+#define CAN_MODE_SILENT_LOOPBACK    ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM))  /*!< Loopback combined with silent mode */
+/**
+  * @}
+  */
+
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
+  * @{
+  */
+#define CAN_SJW_1TQ                 (0x00000000U)              /*!< 1 time quantum */
+#define CAN_SJW_2TQ                 ((uint32_t)CAN_BTR_SJW_0)  /*!< 2 time quantum */
+#define CAN_SJW_3TQ                 ((uint32_t)CAN_BTR_SJW_1)  /*!< 3 time quantum */
+#define CAN_SJW_4TQ                 ((uint32_t)CAN_BTR_SJW)    /*!< 4 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
+  * @{
+  */
+#define CAN_BS1_1TQ                 (0x00000000U)                                                /*!< 1 time quantum  */
+#define CAN_BS1_2TQ                 ((uint32_t)CAN_BTR_TS1_0)                                    /*!< 2 time quantum  */
+#define CAN_BS1_3TQ                 ((uint32_t)CAN_BTR_TS1_1)                                    /*!< 3 time quantum  */
+#define CAN_BS1_4TQ                 ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0))                  /*!< 4 time quantum  */
+#define CAN_BS1_5TQ                 ((uint32_t)CAN_BTR_TS1_2)                                    /*!< 5 time quantum  */
+#define CAN_BS1_6TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0))                  /*!< 6 time quantum  */
+#define CAN_BS1_7TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1))                  /*!< 7 time quantum  */
+#define CAN_BS1_8TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 8 time quantum  */
+#define CAN_BS1_9TQ                 ((uint32_t)CAN_BTR_TS1_3)                                    /*!< 9 time quantum  */
+#define CAN_BS1_10TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0))                  /*!< 10 time quantum */
+#define CAN_BS1_11TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1))                  /*!< 11 time quantum */
+#define CAN_BS1_12TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 12 time quantum */
+#define CAN_BS1_13TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2))                  /*!< 13 time quantum */
+#define CAN_BS1_14TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0))  /*!< 14 time quantum */
+#define CAN_BS1_15TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1))  /*!< 15 time quantum */
+#define CAN_BS1_16TQ                ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
+  * @{
+  */
+#define CAN_BS2_1TQ                 (0x00000000U)                                /*!< 1 time quantum */
+#define CAN_BS2_2TQ                 ((uint32_t)CAN_BTR_TS2_0)                    /*!< 2 time quantum */
+#define CAN_BS2_3TQ                 ((uint32_t)CAN_BTR_TS2_1)                    /*!< 3 time quantum */
+#define CAN_BS2_4TQ                 ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0))  /*!< 4 time quantum */
+#define CAN_BS2_5TQ                 ((uint32_t)CAN_BTR_TS2_2)                    /*!< 5 time quantum */
+#define CAN_BS2_6TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0))  /*!< 6 time quantum */
+#define CAN_BS2_7TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1))  /*!< 7 time quantum */
+#define CAN_BS2_8TQ                 ((uint32_t)CAN_BTR_TS2)                      /*!< 8 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_mode CAN Filter Mode
+  * @{
+  */
+#define CAN_FILTERMODE_IDMASK       (0x00000000U)  /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST       (0x00000001U)  /*!< Identifier list mode */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+  * @{
+  */
+#define CAN_FILTERSCALE_16BIT       (0x00000000U)  /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT       (0x00000001U)  /*!< One 32-bit filter  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_activation CAN Filter Activation
+  * @{
+  */
+#define CAN_FILTER_DISABLE          (0x00000000U)  /*!< Disable filter */
+#define CAN_FILTER_ENABLE           (0x00000001U)  /*!< Enable filter  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+  * @{
+  */
+#define CAN_FILTER_FIFO0            (0x00000000U)  /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1            (0x00000001U)  /*!< Filter FIFO 1 assignment for filter x */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_identifier_type CAN Identifier Type
+  * @{
+  */
+#define CAN_ID_STD                  (0x00000000U)  /*!< Standard Id */
+#define CAN_ID_EXT                  (0x00000004U)  /*!< Extended Id */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+  * @{
+  */
+#define CAN_RTR_DATA                (0x00000000U)  /*!< Data frame   */
+#define CAN_RTR_REMOTE              (0x00000002U)  /*!< Remote frame */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_receive_FIFO_number CAN Receive FIFO Number
+  * @{
+  */
+#define CAN_RX_FIFO0                (0x00000000U)  /*!< CAN receive FIFO 0 */
+#define CAN_RX_FIFO1                (0x00000001U)  /*!< CAN receive FIFO 1 */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Tx_Mailboxes CAN Tx Mailboxes
+  * @{
+  */
+#define CAN_TX_MAILBOX0             (0x00000001U)  /*!< Tx Mailbox 0  */
+#define CAN_TX_MAILBOX1             (0x00000002U)  /*!< Tx Mailbox 1  */
+#define CAN_TX_MAILBOX2             (0x00000004U)  /*!< Tx Mailbox 2  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_flags CAN Flags
+  * @{
+  */
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0              (0x00000500U)  /*!< Request complete MailBox 0 flag   */
+#define CAN_FLAG_TXOK0              (0x00000501U)  /*!< Transmission OK MailBox 0 flag    */
+#define CAN_FLAG_ALST0              (0x00000502U)  /*!< Arbitration Lost MailBox 0 flag   */
+#define CAN_FLAG_TERR0              (0x00000503U)  /*!< Transmission error MailBox 0 flag */
+#define CAN_FLAG_RQCP1              (0x00000508U)  /*!< Request complete MailBox1 flag    */
+#define CAN_FLAG_TXOK1              (0x00000509U)  /*!< Transmission OK MailBox 1 flag    */
+#define CAN_FLAG_ALST1              (0x0000050AU)  /*!< Arbitration Lost MailBox 1 flag   */
+#define CAN_FLAG_TERR1              (0x0000050BU)  /*!< Transmission error MailBox 1 flag */
+#define CAN_FLAG_RQCP2              (0x00000510U)  /*!< Request complete MailBox2 flag    */
+#define CAN_FLAG_TXOK2              (0x00000511U)  /*!< Transmission OK MailBox 2 flag    */
+#define CAN_FLAG_ALST2              (0x00000512U)  /*!< Arbitration Lost MailBox 2 flag   */
+#define CAN_FLAG_TERR2              (0x00000513U)  /*!< Transmission error MailBox 2 flag */
+#define CAN_FLAG_TME0               (0x0000051AU)  /*!< Transmit mailbox 0 empty flag     */
+#define CAN_FLAG_TME1               (0x0000051BU)  /*!< Transmit mailbox 1 empty flag     */
+#define CAN_FLAG_TME2               (0x0000051CU)  /*!< Transmit mailbox 2 empty flag     */
+#define CAN_FLAG_LOW0               (0x0000051DU)  /*!< Lowest priority mailbox 0 flag    */
+#define CAN_FLAG_LOW1               (0x0000051EU)  /*!< Lowest priority mailbox 1 flag    */
+#define CAN_FLAG_LOW2               (0x0000051FU)  /*!< Lowest priority mailbox 2 flag    */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0                (0x00000203U)  /*!< RX FIFO 0 Full flag               */
+#define CAN_FLAG_FOV0               (0x00000204U)  /*!< RX FIFO 0 Overrun flag            */
+#define CAN_FLAG_FF1                (0x00000403U)  /*!< RX FIFO 1 Full flag               */
+#define CAN_FLAG_FOV1               (0x00000404U)  /*!< RX FIFO 1 Overrun flag            */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_INAK               (0x00000100U)  /*!< Initialization acknowledge flag   */
+#define CAN_FLAG_SLAK               (0x00000101U)  /*!< Sleep acknowledge flag            */
+#define CAN_FLAG_ERRI               (0x00000102U)  /*!< Error flag                        */
+#define CAN_FLAG_WKU                (0x00000103U)  /*!< Wake up interrupt flag            */
+#define CAN_FLAG_SLAKI              (0x00000104U)  /*!< Sleep acknowledge interrupt flag  */
+
+/* Error Flags */
+#define CAN_FLAG_EWG                (0x00000300U)  /*!< Error warning flag                */
+#define CAN_FLAG_EPV                (0x00000301U)  /*!< Error passive flag                */
+#define CAN_FLAG_BOF                (0x00000302U)  /*!< Bus-Off flag                      */
+/**
+  * @}
+  */
+
+
+/** @defgroup CAN_Interrupts CAN Interrupts
+  * @{
+  */
+/* Transmit Interrupt */
+#define CAN_IT_TX_MAILBOX_EMPTY     ((uint32_t)CAN_IER_TMEIE)   /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_RX_FIFO0_MSG_PENDING ((uint32_t)CAN_IER_FMPIE0)  /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_RX_FIFO0_FULL        ((uint32_t)CAN_IER_FFIE0)   /*!< FIFO 0 full interrupt            */
+#define CAN_IT_RX_FIFO0_OVERRUN     ((uint32_t)CAN_IER_FOVIE0)  /*!< FIFO 0 overrun interrupt         */
+#define CAN_IT_RX_FIFO1_MSG_PENDING ((uint32_t)CAN_IER_FMPIE1)  /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_RX_FIFO1_FULL        ((uint32_t)CAN_IER_FFIE1)   /*!< FIFO 1 full interrupt            */
+#define CAN_IT_RX_FIFO1_OVERRUN     ((uint32_t)CAN_IER_FOVIE1)  /*!< FIFO 1 overrun interrupt         */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WAKEUP               ((uint32_t)CAN_IER_WKUIE)   /*!< Wake-up interrupt                */
+#define CAN_IT_SLEEP_ACK            ((uint32_t)CAN_IER_SLKIE)   /*!< Sleep acknowledge interrupt      */
+
+/* Error Interrupts */
+#define CAN_IT_ERROR_WARNING        ((uint32_t)CAN_IER_EWGIE)   /*!< Error warning interrupt          */
+#define CAN_IT_ERROR_PASSIVE        ((uint32_t)CAN_IER_EPVIE)   /*!< Error passive interrupt          */
+#define CAN_IT_BUSOFF               ((uint32_t)CAN_IER_BOFIE)   /*!< Bus-off interrupt                */
+#define CAN_IT_LAST_ERROR_CODE      ((uint32_t)CAN_IER_LECIE)   /*!< Last error code interrupt        */
+#define CAN_IT_ERROR                ((uint32_t)CAN_IER_ERRIE)   /*!< Error Interrupt                  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+  * @{
+  */
+
+/** @brief  Reset CAN handle state
+  * @param  __HANDLE__ CAN handle.
+  * @retval None
+  */
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) do{                                              \
+                                                     (__HANDLE__)->State = HAL_CAN_STATE_RESET;   \
+                                                     (__HANDLE__)->MspInitCallback = NULL;        \
+                                                     (__HANDLE__)->MspDeInitCallback = NULL;      \
+                                                   } while(0)
+#else
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+#endif /*USE_HAL_CAN_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable the specified CAN interrupts.
+  * @param  __HANDLE__ CAN handle.
+  * @param  __INTERRUPT__ CAN Interrupt sources to enable.
+  *           This parameter can be any combination of @arg CAN_Interrupts
+  * @retval None
+  */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified CAN interrupts.
+  * @param  __HANDLE__ CAN handle.
+  * @param  __INTERRUPT__ CAN Interrupt sources to disable.
+  *           This parameter can be any combination of @arg CAN_Interrupts
+  * @retval None
+  */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/** @brief  Check if the specified CAN interrupt source is enabled or disabled.
+  * @param  __HANDLE__ specifies the CAN Handle.
+  * @param  __INTERRUPT__ specifies the CAN interrupt source to check.
+  *           This parameter can be a value of @arg CAN_Interrupts
+  * @retval The state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) & (__INTERRUPT__))
+
+/** @brief  Check whether the specified CAN flag is set or not.
+  * @param  __HANDLE__ specifies the CAN Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of @arg CAN_flags
+  * @retval The state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+  ((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 3U)? ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
+
+/** @brief  Clear the specified CAN pending flag.
+  * @param  __HANDLE__ specifies the CAN Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_FLAG_RQCP0: Request complete MailBox 0 Flag
+  *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox 0 Flag
+  *            @arg CAN_FLAG_ALST0: Arbitration Lost MailBox 0 Flag
+  *            @arg CAN_FLAG_TERR0: Transmission error MailBox 0 Flag
+  *            @arg CAN_FLAG_RQCP1: Request complete MailBox 1 Flag
+  *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox 1 Flag
+  *            @arg CAN_FLAG_ALST1: Arbitration Lost MailBox 1 Flag
+  *            @arg CAN_FLAG_TERR1: Transmission error MailBox 1 Flag
+  *            @arg CAN_FLAG_RQCP2: Request complete MailBox 2 Flag
+  *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox 2 Flag
+  *            @arg CAN_FLAG_ALST2: Arbitration Lost MailBox 2 Flag
+  *            @arg CAN_FLAG_TERR2: Transmission error MailBox 2 Flag
+  *            @arg CAN_FLAG_FF0:   RX FIFO 0 Full Flag
+  *            @arg CAN_FLAG_FOV0:  RX FIFO 0 Overrun Flag
+  *            @arg CAN_FLAG_FF1:   RX FIFO 1 Full Flag
+  *            @arg CAN_FLAG_FOV1:  RX FIFO 1 Overrun Flag
+  *            @arg CAN_FLAG_WKUI:  Wake up Interrupt Flag
+  *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Interrupt Flag
+  * @retval None
+  */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+  ((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions CAN Exported Functions
+  * @{
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef *hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef *hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef *hcan);
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_CAN_RegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID, void (* pCallback)(CAN_HandleTypeDef *_hcan));
+HAL_StatusTypeDef HAL_CAN_UnRegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID);
+
+#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2 Configuration functions
+ *  @brief    Configuration functions
+ * @{
+ */
+
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, CAN_FilterTypeDef *sFilterConfig);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3 Control functions
+ *  @brief    Control functions
+ * @{
+ */
+
+/* Control functions **********************************************************/
+HAL_StatusTypeDef HAL_CAN_Start(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Stop(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_RequestSleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_IsSleepActive(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_AddTxMessage(CAN_HandleTypeDef *hcan, CAN_TxHeaderTypeDef *pHeader, uint8_t aData[], uint32_t *pTxMailbox);
+HAL_StatusTypeDef HAL_CAN_AbortTxRequest(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
+uint32_t HAL_CAN_GetTxMailboxesFreeLevel(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_IsTxMessagePending(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
+uint32_t HAL_CAN_GetTxTimestamp(CAN_HandleTypeDef *hcan, uint32_t TxMailbox);
+HAL_StatusTypeDef HAL_CAN_GetRxMessage(CAN_HandleTypeDef *hcan, uint32_t RxFifo, CAN_RxHeaderTypeDef *pHeader, uint8_t aData[]);
+uint32_t HAL_CAN_GetRxFifoFillLevel(CAN_HandleTypeDef *hcan, uint32_t RxFifo);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group4 Interrupts management
+ *  @brief    Interrupts management
+ * @{
+ */
+/* Interrupts management ******************************************************/
+HAL_StatusTypeDef HAL_CAN_ActivateNotification(CAN_HandleTypeDef *hcan, uint32_t ActiveITs);
+HAL_StatusTypeDef HAL_CAN_DeactivateNotification(CAN_HandleTypeDef *hcan, uint32_t InactiveITs);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group5 Callback functions
+ *  @brief    Callback functions
+ * @{
+ */
+/* Callbacks functions ********************************************************/
+
+void HAL_CAN_TxMailbox0CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox1CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox2CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox0AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox1AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox2AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo0FullCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo1FullCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_SleepCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_WakeUpFromRxMsgCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group6 Peripheral State and Error functions
+ *  @brief   CAN Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+  * @{
+  */
+#define CAN_FLAG_MASK  (0x000000FFU)
+/**
+  * @}
+  */
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+  * @{
+  */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+                           ((MODE) == CAN_MODE_LOOPBACK)|| \
+                           ((MODE) == CAN_MODE_SILENT) || \
+                           ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ) || \
+                         ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) (((BS1) == CAN_BS1_1TQ) || ((BS1) == CAN_BS1_2TQ) || \
+                         ((BS1) == CAN_BS1_3TQ) || ((BS1) == CAN_BS1_4TQ) || \
+                         ((BS1) == CAN_BS1_5TQ) || ((BS1) == CAN_BS1_6TQ) || \
+                         ((BS1) == CAN_BS1_7TQ) || ((BS1) == CAN_BS1_8TQ) || \
+                         ((BS1) == CAN_BS1_9TQ) || ((BS1) == CAN_BS1_10TQ)|| \
+                         ((BS1) == CAN_BS1_11TQ)|| ((BS1) == CAN_BS1_12TQ)|| \
+                         ((BS1) == CAN_BS1_13TQ)|| ((BS1) == CAN_BS1_14TQ)|| \
+                         ((BS1) == CAN_BS1_15TQ)|| ((BS1) == CAN_BS1_16TQ))
+#define IS_CAN_BS2(BS2) (((BS2) == CAN_BS2_1TQ) || ((BS2) == CAN_BS2_2TQ) || \
+                         ((BS2) == CAN_BS2_3TQ) || ((BS2) == CAN_BS2_4TQ) || \
+                         ((BS2) == CAN_BS2_5TQ) || ((BS2) == CAN_BS2_6TQ) || \
+                         ((BS2) == CAN_BS2_7TQ) || ((BS2) == CAN_BS2_8TQ))
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
+#define IS_CAN_FILTER_ID_HALFWORD(HALFWORD) ((HALFWORD) <= 0xFFFFU)
+#if   defined(CAN2)
+#define IS_CAN_FILTER_BANK_DUAL(BANK) ((BANK) <= 27U)
+#endif
+#define IS_CAN_FILTER_BANK_SINGLE(BANK) ((BANK) <= 13U)
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+                                  ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+                                    ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_ACTIVATION(ACTIVATION) (((ACTIVATION) == CAN_FILTER_DISABLE) || \
+                                              ((ACTIVATION) == CAN_FILTER_ENABLE))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+                                  ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_TX_MAILBOX(TRANSMITMAILBOX) (((TRANSMITMAILBOX) == CAN_TX_MAILBOX0 ) || \
+                                            ((TRANSMITMAILBOX) == CAN_TX_MAILBOX1 ) || \
+                                            ((TRANSMITMAILBOX) == CAN_TX_MAILBOX2 ))
+#define IS_CAN_TX_MAILBOX_LIST(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= (CAN_TX_MAILBOX0 | CAN_TX_MAILBOX1 | CAN_TX_MAILBOX2))
+#define IS_CAN_STDID(STDID)   ((STDID) <= 0x7FFU)
+#define IS_CAN_EXTID(EXTID)   ((EXTID) <= 0x1FFFFFFFU)
+#define IS_CAN_DLC(DLC)       ((DLC) <= 8U)
+#define IS_CAN_IDTYPE(IDTYPE)  (((IDTYPE) == CAN_ID_STD) || \
+                                ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_RX_FIFO(FIFO) (((FIFO) == CAN_RX_FIFO0) || ((FIFO) == CAN_RX_FIFO1))
+#define IS_CAN_IT(IT) ((IT) <= (CAN_IT_TX_MAILBOX_EMPTY     | CAN_IT_RX_FIFO0_MSG_PENDING      | \
+                                CAN_IT_RX_FIFO0_FULL        | CAN_IT_RX_FIFO0_OVERRUN          | \
+                                CAN_IT_RX_FIFO1_MSG_PENDING | CAN_IT_RX_FIFO1_FULL             | \
+                                CAN_IT_RX_FIFO1_OVERRUN     | CAN_IT_WAKEUP                    | \
+                                CAN_IT_SLEEP_ACK            | CAN_IT_ERROR_WARNING             | \
+                                CAN_IT_ERROR_PASSIVE        | CAN_IT_BUSOFF                    | \
+                                CAN_IT_LAST_ERROR_CODE      | CAN_IT_ERROR))
+
+/**
+  * @}
+  */
+/* End of private macros -----------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+
+#endif /* CAN1 */
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h

@@ -0,0 +1,552 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_cec.h
+  * @author  MCD Application Team
+  * @brief   Header file of CEC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CEC_H
+#define __STM32F1xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+#if defined (CEC)
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CEC
+  * @{
+  */
+ 
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup CEC_Exported_Types CEC Exported Types
+  * @{
+  */
+/** 
+  * @brief CEC Init Structure definition  
+  */ 
+typedef struct
+{
+  uint32_t TimingErrorFree; /*!< Configures the CEC Bit Timing Error Mode. 
+                                 This parameter can be a value of @ref CEC_BitTimingErrorMode */
+  uint32_t PeriodErrorFree; /*!< Configures the CEC Bit Period Error Mode. 
+                                 This parameter can be a value of @ref CEC_BitPeriodErrorMode */
+  uint16_t  OwnAddress;     /*!< Own addresses configuration
+                                 This parameter can be a value of @ref CEC_OWN_ADDRESS */
+  uint8_t  *RxBuffer;       /*!< CEC Rx buffer pointeur */
+}CEC_InitTypeDef;
+
+/** 
+  * @brief HAL CEC State structures definition 
+  * @note  HAL CEC State value is a combination of 2 different substates: gState and RxState.
+  *        - gState contains CEC state information related to global Handle management 
+  *          and also information related to Tx operations.
+  *          gState value coding follow below described bitmap :
+  *          b7 (not used)
+  *             x  : Should be set to 0
+  *          b6  Error information 
+  *             0  : No Error
+  *             1  : Error
+  *          b5     IP initilisation status
+  *             0  : Reset (IP not initialized)
+  *             1  : Init done (IP initialized. HAL CEC Init function already called)
+  *          b4-b3  (not used)
+  *             xx : Should be set to 00
+  *          b2     Intrinsic process state
+  *             0  : Ready
+  *             1  : Busy (IP busy with some configuration or internal operations)
+  *          b1     (not used)
+  *             x  : Should be set to 0
+  *          b0     Tx state
+  *             0  : Ready (no Tx operation ongoing)
+  *             1  : Busy (Tx operation ongoing)
+  *        - RxState contains information related to Rx operations.
+  *          RxState value coding follow below described bitmap :
+  *          b7-b6  (not used)
+  *             xx : Should be set to 00
+  *          b5     IP initilisation status
+  *             0  : Reset (IP not initialized)
+  *             1  : Init done (IP initialized)
+  *          b4-b2  (not used)
+  *            xxx : Should be set to 000
+  *          b1     Rx state
+  *             0  : Ready (no Rx operation ongoing)
+  *             1  : Busy (Rx operation ongoing)
+  *          b0     (not used)
+  *             x  : Should be set to 0.  
+  */ 
+typedef enum
+{
+  HAL_CEC_STATE_RESET             = 0x00U,    /*!< Peripheral is not yet Initialized 
+                                                   Value is allowed for gState and RxState             */
+  HAL_CEC_STATE_READY             = 0x20U,    /*!< Peripheral Initialized and ready for use
+                                                   Value is allowed for gState and RxState             */
+  HAL_CEC_STATE_BUSY              = 0x24U,    /*!< an internal process is ongoing
+                                                   Value is allowed for gState only                    */
+  HAL_CEC_STATE_BUSY_RX           = 0x22U,    /*!< Data Reception process is ongoing
+                                                   Value is allowed for RxState only                   */
+  HAL_CEC_STATE_BUSY_TX           = 0x21U,    /*!< Data Transmission process is ongoing 
+                                                   Value is allowed for gState only                    */
+  HAL_CEC_STATE_BUSY_RX_TX        = 0x23U,    /*!< an internal process is ongoing
+                                                   Value is allowed for gState only                    */
+  HAL_CEC_STATE_ERROR             = 0x60U     /*!< Error Value is allowed for gState only              */
+}HAL_CEC_StateTypeDef;
+
+/** 
+  * @brief  CEC handle Structure definition  
+  */  
+typedef struct __CEC_HandleTypeDef
+{
+  CEC_TypeDef             *Instance;      /*!< CEC registers base address */
+  
+  CEC_InitTypeDef         Init;           /*!< CEC communication parameters */
+  
+  uint8_t                 *pTxBuffPtr;    /*!< Pointer to CEC Tx transfer Buffer */
+  
+  uint16_t                TxXferCount;    /*!< CEC Tx Transfer Counter */
+  
+  uint16_t                RxXferSize;     /*!< CEC Rx Transfer size, 0: header received only */
+  
+  HAL_LockTypeDef         Lock;           /*!< Locking object */
+
+  HAL_CEC_StateTypeDef    gState;         /*!< CEC state information related to global Handle management 
+                                               and also related to Tx operations.
+                                               This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+  
+  HAL_CEC_StateTypeDef    RxState;        /*!< CEC state information related to Rx operations.
+                                               This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+  
+  uint32_t                ErrorCode;      /*!< For errors handling purposes, copy of ISR register 
+                                               in case error is reported */  
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+  void  (* TxCpltCallback) ( struct __CEC_HandleTypeDef * hcec);                            /*!< CEC Tx Transfer completed callback */
+  void  (* RxCpltCallback) ( struct __CEC_HandleTypeDef * hcec, uint32_t RxFrameSize);      /*!< CEC Rx Transfer completed callback */
+  void  (* ErrorCallback)  ( struct __CEC_HandleTypeDef * hcec);                            /*!< CEC error callback */
+
+  void  (* MspInitCallback)        ( struct __CEC_HandleTypeDef * hcec);    /*!< CEC Msp Init callback              */
+  void  (* MspDeInitCallback)      ( struct __CEC_HandleTypeDef * hcec);    /*!< CEC Msp DeInit callback            */
+
+#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */											   
+}CEC_HandleTypeDef;
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL CEC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_CEC_TX_CPLT_CB_ID      = 0x00U,    /*!< CEC Tx Transfer completed callback ID  */
+  HAL_CEC_RX_CPLT_CB_ID      = 0x01U,    /*!< CEC Rx Transfer completed callback ID  */
+  HAL_CEC_ERROR_CB_ID        = 0x02U,    /*!< CEC error callback  ID                 */
+  HAL_CEC_MSPINIT_CB_ID      = 0x03U,    /*!< CEC Msp Init callback ID               */
+  HAL_CEC_MSPDEINIT_CB_ID    = 0x04U     /*!< CEC Msp DeInit callback ID             */
+}HAL_CEC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL CEC Callback pointer definition
+  */
+typedef  void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef * hcec); /*!< pointer to an CEC callback function */
+typedef  void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef * hcec, uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed callback function */
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+  * @{
+  */
+
+/** @defgroup CEC_Error_Code CEC Error Code
+  * @{
+  */
+#define HAL_CEC_ERROR_NONE   0x00000000U    /*!< no error */
+#define HAL_CEC_ERROR_BTE    CEC_ESR_BTE    /*!< Bit Timing Error */
+#define HAL_CEC_ERROR_BPE    CEC_ESR_BPE    /*!< Bit Period Error */
+#define HAL_CEC_ERROR_RBTFE  CEC_ESR_RBTFE  /*!< Rx Block Transfer Finished Error */
+#define HAL_CEC_ERROR_SBE    CEC_ESR_SBE    /*!< Start Bit Error */
+#define HAL_CEC_ERROR_ACKE   CEC_ESR_ACKE   /*!< Block Acknowledge Error */
+#define HAL_CEC_ERROR_LINE   CEC_ESR_LINE   /*!< Line Error */
+#define HAL_CEC_ERROR_TBTFE  CEC_ESR_TBTFE  /*!< Tx Block Transfer Finished Error */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+#define  HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback Error  */
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BitTimingErrorMode Bit Timing Error Mode
+  * @{
+  */ 
+#define CEC_BIT_TIMING_ERROR_MODE_STANDARD  0x00000000U      /*!< Bit timing error Standard Mode */
+#define CEC_BIT_TIMING_ERROR_MODE_ERRORFREE CEC_CFGR_BTEM    /*!< Bit timing error Free Mode */
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BitPeriodErrorMode Bit Period Error Mode
+  * @{
+  */ 
+#define CEC_BIT_PERIOD_ERROR_MODE_STANDARD 0x00000000U      /*!< Bit period error Standard Mode */
+#define CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE CEC_CFGR_BPEM    /*!< Bit period error Flexible Mode */
+/**
+  * @}
+  */ 
+  
+/** @defgroup CEC_Initiator_Position   CEC Initiator logical address position in message header     
+  * @{
+  */
+#define CEC_INITIATOR_LSB_POS                  4U
+/**
+  * @}
+  */
+
+/** @defgroup CEC_OWN_ADDRESS   CEC Own Address    
+  * @{
+  */
+#define CEC_OWN_ADDRESS_NONE            CEC_OWN_ADDRESS_0    /* Reset value */
+#define CEC_OWN_ADDRESS_0              ((uint16_t)0x0000U)   /* Logical Address 0 */
+#define CEC_OWN_ADDRESS_1              ((uint16_t)0x0001U)   /* Logical Address 1 */
+#define CEC_OWN_ADDRESS_2              ((uint16_t)0x0002U)   /* Logical Address 2 */
+#define CEC_OWN_ADDRESS_3              ((uint16_t)0x0003U)   /* Logical Address 3 */
+#define CEC_OWN_ADDRESS_4              ((uint16_t)0x0004U)   /* Logical Address 4 */
+#define CEC_OWN_ADDRESS_5              ((uint16_t)0x0005U)   /* Logical Address 5 */
+#define CEC_OWN_ADDRESS_6              ((uint16_t)0x0006U)   /* Logical Address 6 */
+#define CEC_OWN_ADDRESS_7              ((uint16_t)0x0007U)   /* Logical Address 7 */
+#define CEC_OWN_ADDRESS_8              ((uint16_t)0x0008U)   /* Logical Address 8 */
+#define CEC_OWN_ADDRESS_9              ((uint16_t)0x0009U)   /* Logical Address 9 */
+#define CEC_OWN_ADDRESS_10             ((uint16_t)0x000AU)   /* Logical Address 10 */
+#define CEC_OWN_ADDRESS_11             ((uint16_t)0x000BU)   /* Logical Address 11 */
+#define CEC_OWN_ADDRESS_12             ((uint16_t)0x000CU)   /* Logical Address 12 */
+#define CEC_OWN_ADDRESS_13             ((uint16_t)0x000DU)   /* Logical Address 13 */
+#define CEC_OWN_ADDRESS_14             ((uint16_t)0x000EU)   /* Logical Address 14 */
+#define CEC_OWN_ADDRESS_15             ((uint16_t)0x000FU)   /* Logical Address 15 */
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Interrupts_Definitions  Interrupts definition
+  * @{
+  */
+#define CEC_IT_IE CEC_CFGR_IE
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Flags_Definitions  Flags definition
+  * @{
+  */
+#define CEC_FLAG_TSOM  CEC_CSR_TSOM
+#define CEC_FLAG_TEOM  CEC_CSR_TEOM
+#define CEC_FLAG_TERR  CEC_CSR_TERR
+#define CEC_FLAG_TBTRF CEC_CSR_TBTRF
+#define CEC_FLAG_RSOM  CEC_CSR_RSOM
+#define CEC_FLAG_REOM  CEC_CSR_REOM
+#define CEC_FLAG_RERR  CEC_CSR_RERR
+#define CEC_FLAG_RBTF  CEC_CSR_RBTF
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+  
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+  * @{
+  */
+
+/** @brief  Reset CEC handle gstate & RxState
+  * @param  __HANDLE__: CEC handle.
+  * @retval None
+  */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_CEC_STATE_RESET;     \
+                                                       (__HANDLE__)->RxState = HAL_CEC_STATE_RESET;    \
+                                                       (__HANDLE__)->MspInitCallback = NULL;           \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;         \
+                                                     } while(0)
+#else  
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_CEC_STATE_RESET;     \
+                                                       (__HANDLE__)->RxState = HAL_CEC_STATE_RESET;    \
+                                                     } while(0)
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+
+/** @brief  Checks whether or not the specified CEC interrupt flag is set.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *     @arg CEC_FLAG_TERR: Tx Error
+  *     @arg CEC_FLAG_TBTRF:Tx Block Transfer Finished
+  *     @arg CEC_FLAG_RERR: Rx Error
+  *     @arg CEC_FLAG_RBTF: Rx Block Transfer Finished
+  * @retval ITStatus
+  */
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) READ_BIT((__HANDLE__)->Instance->CSR,(__FLAG__)) 
+
+/** @brief  Clears the CEC's pending flags.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __FLAG__: specifies the flag to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg CEC_CSR_TERR: Tx Error
+  *     @arg CEC_FLAG_TBTRF: Tx Block Transfer Finished
+  *     @arg CEC_CSR_RERR: Rx Error
+  *     @arg CEC_CSR_RBTF: Rx Block Transfer Finished
+  * @retval none  
+  */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__)                                                                   \
+                          do {                                                                                       \
+                            uint32_t tmp = 0x0U;                                                                     \
+                            tmp = (__HANDLE__)->Instance->CSR & 0x00000002U;                                         \
+                            (__HANDLE__)->Instance->CSR &= (uint32_t)(((~(uint32_t)(__FLAG__)) & 0xFFFFFFFCU) | tmp);\
+                          } while(0U)
+
+/** @brief  Enables the specified CEC interrupt.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to enable.
+  *          This parameter can be:
+  *            @arg CEC_IT_IE         : Interrupt Enable.
+  * @retval none
+  */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
+
+/** @brief  Disables the specified CEC interrupt.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to disable.
+  *          This parameter can be:
+  *            @arg CEC_IT_IE         : Interrupt Enable
+  * @retval none
+  */   
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
+
+/** @brief  Checks whether or not the specified CEC interrupt is enabled.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to check.
+  *          This parameter can be:
+  *            @arg CEC_IT_IE         : Interrupt Enable
+  * @retval FlagStatus  
+  */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) READ_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
+
+/** @brief  Enables the CEC device
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  */
+#define __HAL_CEC_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE)
+
+/** @brief  Disables the CEC device
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  */
+#define __HAL_CEC_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE)
+
+/** @brief  Set Transmission Start flag
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM)
+
+/** @brief  Set Transmission End flag
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none
+  */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM)
+
+/** @brief  Get Transmission Start flag
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval FlagStatus 
+  */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM)
+
+/** @brief  Get Transmission End flag
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval FlagStatus 
+  */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM)
+
+/** @brief  Clear OAR register
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__)   CLEAR_BIT((__HANDLE__)->Instance->OAR, CEC_OAR_OA)
+
+/** @brief  Set OAR register
+  * @param  __HANDLE__: specifies the CEC Handle. 
+  * @param  __ADDRESS__: Own Address value.
+  * @retval none 
+  */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) MODIFY_REG((__HANDLE__)->Instance->OAR, CEC_OAR_OA, (__ADDRESS__));
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions CEC Exported Functions
+  * @{
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions 
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, pCEC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec);
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group2 Input and Output operation functions 
+  *  @brief CEC Transmit/Receive functions 
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress,uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions 
+  *  @brief   CEC control functions 
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CEC_Private_Types CEC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Variables CEC Private Variables
+  * @{
+  */
+  
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+  * @{
+  */
+#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BIT_TIMING_ERROR_MODE_STANDARD) || \
+                                            ((MODE) == CEC_BIT_TIMING_ERROR_MODE_ERRORFREE))
+
+#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BIT_PERIOD_ERROR_MODE_STANDARD) || \
+                                            ((MODE) == CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE))
+
+/** @brief Check CEC message size.
+  *       The message size is the payload size: without counting the header, 
+  *       it varies from 0 byte (ping operation, one header only, no payload) to 
+  *       15 bytes (1 opcode and up to 14 operands following the header). 
+  * @param  __SIZE__: CEC message size.               
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U)
+/** @brief Check CEC device Own Address Register (OAR) setting.
+  * @param  __ADDRESS__: CEC own address.               
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU)
+
+/** @brief Check CEC initiator or destination logical address setting.
+  *        Initiator and destination addresses are coded over 4 bits. 
+  * @param  __ADDRESS__: CEC initiator or logical address.               
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU)
+
+
+
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+  * @{
+  */
+  
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#endif /* CEC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h

@@ -0,0 +1,399 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f1xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CONF_H
+#define __STM32F1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#if defined(USE_STM3210C_EVAL)
+#define HSE_VALUE    25000000U /*!< Value of the External oscillator in Hz */
+#else
+#define HSE_VALUE    8000000U /*!< Value of the External oscillator in Hz */
+#endif
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    100U      /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE              8000000U  /*!< Value of the Internal oscillator in Hz */
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE               40000U     /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature. */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE               32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    5000U     /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0x0FU /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    8U                  /* 8 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32f1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32f1xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32f1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+#include "stm32f1xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "Legacy/stm32f1xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32f1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32f1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32f1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32f1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32f1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32f1xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32f1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32f1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32f1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32f1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32f1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32f1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32f1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32f1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32f1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32f1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32f1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32f1xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32f1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32f1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32f1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32f1xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f1xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t* file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h

@@ -0,0 +1,410 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CORTEX_H
+#define __STM32F1xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX
+  * @{
+  */ 
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1U)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+  * @brief  MPU Region initialization structure 
+  * @{
+  */
+typedef struct
+{
+  uint8_t                Enable;                /*!< Specifies the status of the region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Enable                 */
+  uint8_t                Number;                /*!< Specifies the number of the region to protect. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Number                 */
+  uint32_t               BaseAddress;           /*!< Specifies the base address of the region to protect.                           */
+  uint8_t                Size;                  /*!< Specifies the size of the region to protect. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Size                   */
+  uint8_t                SubRegionDisable;      /*!< Specifies the number of the subregion protection to disable. 
+                                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF    */         
+  uint8_t                TypeExtField;          /*!< Specifies the TEX field level.
+                                                     This parameter can be a value of @ref CORTEX_MPU_TEX_Levels                    */                 
+  uint8_t                AccessPermission;      /*!< Specifies the region access permission type. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes  */
+  uint8_t                DisableExec;           /*!< Specifies the instruction access status. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Instruction_Access            */
+  uint8_t                IsShareable;           /*!< Specifies the shareability status of the protected region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Shareable              */
+  uint8_t                IsCacheable;           /*!< Specifies the cacheable status of the region protected. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable              */
+  uint8_t                IsBufferable;          /*!< Specifies the bufferable status of the protected region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable             */
+}MPU_Region_InitTypeDef;
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+  * @{
+  */
+#define NVIC_PRIORITYGROUP_0         0x00000007U /*!< 0 bits for pre-emption priority
+                                                      4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1         0x00000006U /*!< 1 bits for pre-emption priority
+                                                      3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2         0x00000005U /*!< 2 bits for pre-emption priority
+                                                      2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3         0x00000004U /*!< 3 bits for pre-emption priority
+                                                      1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4         0x00000003U /*!< 4 bits for pre-emption priority
+                                                      0 bits for subpriority */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source 
+  * @{
+  */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8    0x00000000U
+#define SYSTICK_CLKSOURCE_HCLK         0x00000004U
+
+/**
+  * @}
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+  * @{
+  */
+#define  MPU_HFNMI_PRIVDEF_NONE           0x00000000U
+#define  MPU_HARDFAULT_NMI                MPU_CTRL_HFNMIENA_Msk
+#define  MPU_PRIVILEGED_DEFAULT           MPU_CTRL_PRIVDEFENA_Msk
+#define  MPU_HFNMI_PRIVDEF               (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+  * @{
+  */
+#define  MPU_REGION_ENABLE     ((uint8_t)0x01)
+#define  MPU_REGION_DISABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+  * @{
+  */
+#define  MPU_INSTRUCTION_ACCESS_ENABLE      ((uint8_t)0x00)
+#define  MPU_INSTRUCTION_ACCESS_DISABLE     ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+  * @{
+  */
+#define  MPU_ACCESS_SHAREABLE        ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_SHAREABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+  * @{
+  */
+#define  MPU_ACCESS_CACHEABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_CACHEABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+  * @{
+  */
+#define  MPU_ACCESS_BUFFERABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_BUFFERABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+  * @{
+  */
+#define  MPU_TEX_LEVEL0    ((uint8_t)0x00)
+#define  MPU_TEX_LEVEL1    ((uint8_t)0x01)
+#define  MPU_TEX_LEVEL2    ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+  * @{
+  */
+#define   MPU_REGION_SIZE_32B      ((uint8_t)0x04)
+#define   MPU_REGION_SIZE_64B      ((uint8_t)0x05)
+#define   MPU_REGION_SIZE_128B     ((uint8_t)0x06)
+#define   MPU_REGION_SIZE_256B     ((uint8_t)0x07)
+#define   MPU_REGION_SIZE_512B     ((uint8_t)0x08)
+#define   MPU_REGION_SIZE_1KB      ((uint8_t)0x09)
+#define   MPU_REGION_SIZE_2KB      ((uint8_t)0x0A)
+#define   MPU_REGION_SIZE_4KB      ((uint8_t)0x0B)
+#define   MPU_REGION_SIZE_8KB      ((uint8_t)0x0C)
+#define   MPU_REGION_SIZE_16KB     ((uint8_t)0x0D)
+#define   MPU_REGION_SIZE_32KB     ((uint8_t)0x0E)
+#define   MPU_REGION_SIZE_64KB     ((uint8_t)0x0F)
+#define   MPU_REGION_SIZE_128KB    ((uint8_t)0x10)
+#define   MPU_REGION_SIZE_256KB    ((uint8_t)0x11)
+#define   MPU_REGION_SIZE_512KB    ((uint8_t)0x12)
+#define   MPU_REGION_SIZE_1MB      ((uint8_t)0x13)
+#define   MPU_REGION_SIZE_2MB      ((uint8_t)0x14)
+#define   MPU_REGION_SIZE_4MB      ((uint8_t)0x15)
+#define   MPU_REGION_SIZE_8MB      ((uint8_t)0x16)
+#define   MPU_REGION_SIZE_16MB     ((uint8_t)0x17)
+#define   MPU_REGION_SIZE_32MB     ((uint8_t)0x18)
+#define   MPU_REGION_SIZE_64MB     ((uint8_t)0x19)
+#define   MPU_REGION_SIZE_128MB    ((uint8_t)0x1A)
+#define   MPU_REGION_SIZE_256MB    ((uint8_t)0x1B)
+#define   MPU_REGION_SIZE_512MB    ((uint8_t)0x1C)
+#define   MPU_REGION_SIZE_1GB      ((uint8_t)0x1D)
+#define   MPU_REGION_SIZE_2GB      ((uint8_t)0x1E)
+#define   MPU_REGION_SIZE_4GB      ((uint8_t)0x1F)
+/**
+  * @}
+  */
+   
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes 
+  * @{
+  */
+#define  MPU_REGION_NO_ACCESS      ((uint8_t)0x00)
+#define  MPU_REGION_PRIV_RW        ((uint8_t)0x01)
+#define  MPU_REGION_PRIV_RW_URO    ((uint8_t)0x02)
+#define  MPU_REGION_FULL_ACCESS    ((uint8_t)0x03)
+#define  MPU_REGION_PRIV_RO        ((uint8_t)0x05)
+#define  MPU_REGION_PRIV_RO_URO    ((uint8_t)0x06)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+  * @{
+  */
+#define  MPU_REGION_NUMBER0    ((uint8_t)0x00)
+#define  MPU_REGION_NUMBER1    ((uint8_t)0x01)
+#define  MPU_REGION_NUMBER2    ((uint8_t)0x02)
+#define  MPU_REGION_NUMBER3    ((uint8_t)0x03)
+#define  MPU_REGION_NUMBER4    ((uint8_t)0x04)
+#define  MPU_REGION_NUMBER5    ((uint8_t)0x05)
+#define  MPU_REGION_NUMBER6    ((uint8_t)0x06)
+#define  MPU_REGION_NUMBER7    ((uint8_t)0x07)
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+  * @{
+  */
+  
+/** @addtogroup CORTEX_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+
+#if (__MPU_PRESENT == 1U)
+void HAL_MPU_Enable(uint32_t MPU_Control);
+void HAL_MPU_Disable(void);
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+  * @{
+  */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)         ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ)                ((IRQ) >= (IRQn_Type)0x00U)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+                                       ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1U)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+                                     ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+                                          ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE)   (((STATE) == MPU_ACCESS_SHAREABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE)   (((STATE) == MPU_ACCESS_CACHEABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE)   (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0)  || \
+                                ((TYPE) == MPU_TEX_LEVEL1)  || \
+                                ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS)   || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+                                                  ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER)    (((NUMBER) == MPU_REGION_NUMBER0) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER1) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER2) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER3) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER4) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER5) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER6) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE)    (((SIZE) == MPU_REGION_SIZE_32B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_64B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_128B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_256B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_512B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_1KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION)  ((SUBREGION) < (uint16_t)0x00FF)
+#endif /* __MPU_PRESENT */
+
+/**                                                                          
+  * @}                                                                  
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CORTEX_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_crc.h

@@ -0,0 +1,184 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_crc.h
+  * @author  MCD Application Team
+  * @brief   Header file of CRC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_CRC_H
+#define STM32F1xx_HAL_CRC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  CRC HAL State Structure definition
+  */
+typedef enum
+{
+  HAL_CRC_STATE_RESET     = 0x00U,  /*!< CRC not yet initialized or disabled */
+  HAL_CRC_STATE_READY     = 0x01U,  /*!< CRC initialized and ready for use   */
+  HAL_CRC_STATE_BUSY      = 0x02U,  /*!< CRC internal process is ongoing     */
+  HAL_CRC_STATE_TIMEOUT   = 0x03U,  /*!< CRC timeout state                   */
+  HAL_CRC_STATE_ERROR     = 0x04U   /*!< CRC error state                     */
+} HAL_CRC_StateTypeDef;
+
+
+/**
+  * @brief  CRC Handle Structure definition
+  */
+typedef struct
+{
+  CRC_TypeDef                 *Instance;   /*!< Register base address        */
+
+  HAL_LockTypeDef             Lock;        /*!< CRC Locking object           */
+
+  __IO HAL_CRC_StateTypeDef   State;       /*!< CRC communication state      */
+
+} CRC_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Constants CRC Exported Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+  * @{
+  */
+
+/** @brief Reset CRC handle state.
+  * @param  __HANDLE__ CRC handle.
+  * @retval None
+  */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+  * @brief  Reset CRC Data Register.
+  * @param  __HANDLE__ CRC handle
+  * @retval None
+  */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+  * @brief Store data in the Independent Data (ID) register.
+  * @param __HANDLE__ CRC handle
+  * @param __VALUE__  Value to be stored in the ID register
+  * @note  Refer to the Reference Manual to get the authorized __VALUE__ length in bits
+  * @retval None
+  */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
+
+/**
+  * @brief Return the data stored in the Independent Data (ID) register.
+  * @param __HANDLE__ CRC handle
+  * @note  Refer to the Reference Manual to get the authorized __VALUE__ length in bits
+  * @retval Value of the ID register
+  */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+/**
+  * @}
+  */
+
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup  CRC_Private_Macros CRC Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions ***********************************************/
+/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
+  * @{
+  */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+  * @}
+  */
+
+/* Peripheral State and Error functions ***************************************/
+/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
+  * @{
+  */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac.h

@@ -0,0 +1,459 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_dac.h
+  * @author  MCD Application Team
+  * @brief   Header file of DAC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_DAC_H
+#define STM32F1xx_HAL_DAC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+#if defined(DAC)
+
+/** @addtogroup DAC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Types DAC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_DAC_STATE_RESET             = 0x00U,  /*!< DAC not yet initialized or disabled  */
+  HAL_DAC_STATE_READY             = 0x01U,  /*!< DAC initialized and ready for use    */
+  HAL_DAC_STATE_BUSY              = 0x02U,  /*!< DAC internal processing is ongoing   */
+  HAL_DAC_STATE_TIMEOUT           = 0x03U,  /*!< DAC timeout state                    */
+  HAL_DAC_STATE_ERROR             = 0x04U   /*!< DAC error state                      */
+
+} HAL_DAC_StateTypeDef;
+
+/**
+  * @brief  DAC handle Structure definition
+  */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+typedef struct __DAC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+{
+  DAC_TypeDef                 *Instance;     /*!< Register base address             */
+
+  __IO HAL_DAC_StateTypeDef   State;         /*!< DAC communication state           */
+
+  HAL_LockTypeDef             Lock;          /*!< DAC locking object                */
+
+  DMA_HandleTypeDef           *DMA_Handle1;  /*!< Pointer DMA handler for channel 1 */
+
+  DMA_HandleTypeDef           *DMA_Handle2;  /*!< Pointer DMA handler for channel 2 */
+
+  __IO uint32_t               ErrorCode;     /*!< DAC Error code                    */
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+  void (* ConvCpltCallbackCh1)            (struct __DAC_HandleTypeDef *hdac);
+  void (* ConvHalfCpltCallbackCh1)        (struct __DAC_HandleTypeDef *hdac);
+  void (* ErrorCallbackCh1)               (struct __DAC_HandleTypeDef *hdac);
+  void (* DMAUnderrunCallbackCh1)         (struct __DAC_HandleTypeDef *hdac);
+
+  void (* ConvCpltCallbackCh2)            (struct __DAC_HandleTypeDef *hdac);
+  void (* ConvHalfCpltCallbackCh2)        (struct __DAC_HandleTypeDef *hdac);
+  void (* ErrorCallbackCh2)               (struct __DAC_HandleTypeDef *hdac);
+  void (* DMAUnderrunCallbackCh2)         (struct __DAC_HandleTypeDef *hdac);
+
+
+  void (* MspInitCallback)                (struct __DAC_HandleTypeDef *hdac);
+  void (* MspDeInitCallback)              (struct __DAC_HandleTypeDef *hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+} DAC_HandleTypeDef;
+
+/**
+  * @brief   DAC Configuration regular Channel structure definition
+  */
+typedef struct
+{
+  uint32_t DAC_Trigger;                  /*!< Specifies the external trigger for the selected DAC channel.
+                                              This parameter can be a value of @ref DAC_trigger_selection */
+
+  uint32_t DAC_OutputBuffer;             /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+                                               This parameter can be a value of @ref DAC_output_buffer */
+
+} DAC_ChannelConfTypeDef;
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL DAC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_DAC_CH1_COMPLETE_CB_ID                 = 0x00U,  /*!< DAC CH1 Complete Callback ID      */
+  HAL_DAC_CH1_HALF_COMPLETE_CB_ID            = 0x01U,  /*!< DAC CH1 half Complete Callback ID */
+  HAL_DAC_CH1_ERROR_ID                       = 0x02U,  /*!< DAC CH1 error Callback ID         */
+  HAL_DAC_CH1_UNDERRUN_CB_ID                 = 0x03U,  /*!< DAC CH1 underrun Callback ID      */
+
+  HAL_DAC_CH2_COMPLETE_CB_ID                 = 0x04U,  /*!< DAC CH2 Complete Callback ID      */
+  HAL_DAC_CH2_HALF_COMPLETE_CB_ID            = 0x05U,  /*!< DAC CH2 half Complete Callback ID */
+  HAL_DAC_CH2_ERROR_ID                       = 0x06U,  /*!< DAC CH2 error Callback ID         */
+  HAL_DAC_CH2_UNDERRUN_CB_ID                 = 0x07U,  /*!< DAC CH2 underrun Callback ID      */
+
+  HAL_DAC_MSPINIT_CB_ID                      = 0x08U,  /*!< DAC MspInit Callback ID           */
+  HAL_DAC_MSPDEINIT_CB_ID                    = 0x09U,  /*!< DAC MspDeInit Callback ID         */
+  HAL_DAC_ALL_CB_ID                          = 0x0AU   /*!< DAC All ID                        */
+} HAL_DAC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL DAC Callback pointer definition
+  */
+typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+  * @{
+  */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+  * @{
+  */
+#define  HAL_DAC_ERROR_NONE              0x00U    /*!< No error                          */
+#define  HAL_DAC_ERROR_DMAUNDERRUNCH1    0x01U    /*!< DAC channel1 DMA underrun error   */
+#define  HAL_DAC_ERROR_DMAUNDERRUNCH2    0x02U    /*!< DAC channel2 DMA underrun error   */
+#define  HAL_DAC_ERROR_DMA               0x04U    /*!< DMA error                         */
+#define  HAL_DAC_ERROR_TIMEOUT           0x08U    /*!< Timeout error                     */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+#define HAL_DAC_ERROR_INVALID_CALLBACK   0x10U    /*!< Invalid callback error            */
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_output_buffer DAC output buffer
+  * @{
+  */
+#define DAC_OUTPUTBUFFER_ENABLE            0x00000000U
+#define DAC_OUTPUTBUFFER_DISABLE           (DAC_CR_BOFF1)
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Channel_selection DAC Channel selection
+  * @{
+  */
+#define DAC_CHANNEL_1                      0x00000000U
+
+#define DAC_CHANNEL_2                      0x00000010U
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_data_alignment DAC data alignment
+  * @{
+  */
+#define DAC_ALIGN_12B_R                    0x00000000U
+#define DAC_ALIGN_12B_L                    0x00000004U
+#define DAC_ALIGN_8B_R                     0x00000008U
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_flags_definition DAC flags definition
+  * @{
+  */
+#define DAC_FLAG_DMAUDR1                   (DAC_SR_DMAUDR1)
+
+#define DAC_FLAG_DMAUDR2                   (DAC_SR_DMAUDR2)
+
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_IT_definition  DAC IT definition
+  * @{
+  */
+#define DAC_IT_DMAUDR1                   (DAC_SR_DMAUDR1)
+
+#define DAC_IT_DMAUDR2                   (DAC_SR_DMAUDR2)
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+  * @{
+  */
+
+/** @brief Reset DAC handle state.
+  * @param  __HANDLE__ specifies the DAC handle.
+  * @retval None
+  */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do {                                                        \
+                                                      (__HANDLE__)->State             = HAL_DAC_STATE_RESET; \
+                                                      (__HANDLE__)->MspInitCallback   = NULL;                \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;                \
+                                                     } while(0)
+#else
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/** @brief Enable the DAC channel.
+  * @param  __HANDLE__ specifies the DAC handle.
+  * @param  __DAC_Channel__ specifies the DAC channel
+  * @retval None
+  */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+  ((__HANDLE__)->Instance->CR |=  (DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL)))
+
+/** @brief Disable the DAC channel.
+  * @param  __HANDLE__ specifies the DAC handle
+  * @param  __DAC_Channel__ specifies the DAC channel.
+  * @retval None
+  */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+  ((__HANDLE__)->Instance->CR &=  ~(DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL)))
+
+/** @brief Set DHR12R1 alignment.
+  * @param  __ALIGNMENT__ specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008UL + (__ALIGNMENT__))
+
+
+/** @brief  Set DHR12R2 alignment.
+  * @param  __ALIGNMENT__ specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014UL + (__ALIGNMENT__))
+
+
+/** @brief  Set DHR12RD alignment.
+  * @param  __ALIGNMENT__ specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020UL + (__ALIGNMENT__))
+
+/** @brief Enable the DAC interrupt.
+  * @param  __HANDLE__ specifies the DAC handle
+  * @param  __INTERRUPT__ specifies the DAC interrupt.
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+  *            @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
+  * @retval None
+  */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt.
+  * @param  __HANDLE__ specifies the DAC handle
+  * @param  __INTERRUPT__ specifies the DAC interrupt.
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+  *            @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
+  * @retval None
+  */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief  Check whether the specified DAC interrupt source is enabled or not.
+  * @param __HANDLE__ DAC handle
+  * @param __INTERRUPT__ DAC interrupt source to check
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+  *            @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
+  * @retval State of interruption (SET or RESET)
+  */
+#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR\
+                                                             & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief  Get the selected DAC's flag status.
+  * @param  __HANDLE__ specifies the DAC handle.
+  * @param  __FLAG__ specifies the DAC flag to get.
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag
+  *            @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag
+  * @retval None
+  */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the DAC's flag.
+  * @param  __HANDLE__ specifies the DAC handle.
+  * @param  __FLAG__ specifies the DAC flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag
+  *            @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag
+  * @retval None
+  */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup DAC_Private_Macros DAC Private Macros
+  * @{
+  */
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+                                           ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+                                 ((CHANNEL) == DAC_CHANNEL_2))
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+                             ((ALIGN) == DAC_ALIGN_12B_L) || \
+                             ((ALIGN) == DAC_ALIGN_8B_R))
+
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0UL)
+
+/**
+  * @}
+  */
+
+/* Include DAC HAL Extended module */
+#include "stm32f1xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup DAC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length,
+                                    uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+/* DAC callback registering/unregistering */
+HAL_StatusTypeDef     HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID,
+                                               pDAC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef     HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Private_Functions DAC Private Functions
+  * @{
+  */
+void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DAC */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F1xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dac_ex.h

@@ -0,0 +1,278 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_dac_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of DAC HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_DAC_EX_H
+#define STM32F1xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+#if defined(DAC)
+
+/** @addtogroup DACEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  HAL State structures definition
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DACEx_Exported_Constants DACEx Exported Constants
+  * @{
+  */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude
+  * @{
+  */
+#define DAC_LFSRUNMASK_BIT0                0x00000000UL                                                        /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0             (                                                   DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0             (                                  DAC_CR_MAMP1_1                 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0             (                                  DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0             (                 DAC_CR_MAMP1_2                                  ) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0             (                 DAC_CR_MAMP1_2                  | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0             (                 DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1                 ) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0             (                 DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0             (DAC_CR_MAMP1_3                                                   ) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0             (DAC_CR_MAMP1_3                                   | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0            (DAC_CR_MAMP1_3                  | DAC_CR_MAMP1_1                 ) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0            (DAC_CR_MAMP1_3                  | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1            0x00000000UL                                                        /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3            (                                                   DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7            (                                  DAC_CR_MAMP1_1                 ) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15           (                                  DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31           (                 DAC_CR_MAMP1_2                                  ) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63           (                 DAC_CR_MAMP1_2                  | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127          (                 DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1                 ) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255          (                 DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511          (DAC_CR_MAMP1_3                                                   ) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023         (DAC_CR_MAMP1_3                                   | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047         (DAC_CR_MAMP1_3                  | DAC_CR_MAMP1_1                 ) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095         (DAC_CR_MAMP1_3                  | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+/**
+  * @}
+  */
+
+/** @defgroup DACEx_trigger_selection DAC trigger selection
+  * @{
+  */
+#define DAC_TRIGGER_NONE                   0x00000000U            /*!< Conversion is automatic once the DAC1_DHRxxxx register 
+                                                                       has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T6_TRGO                ((uint32_t)                                                    DAC_CR_TEN1)  /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO                ((uint32_t)(                 DAC_CR_TSEL1_1                  | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T2_TRGO                ((uint32_t)(DAC_CR_TSEL1_2                                   | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO                ((uint32_t)(DAC_CR_TSEL1_2                  | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9                ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1                  | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE               ((uint32_t)(DAC_CR_TSEL1                                     | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#if defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || defined (STM32F103xG)
+/* For STM32F10x high-density and XL-density devices: TIM8 */
+#define DAC_TRIGGER_T8_TRGO                ((uint32_t)                                   DAC_CR_TSEL1_0 | DAC_CR_TEN1)  /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
+#endif /* STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+   
+#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F105xC) || defined (STM32F107xC)
+/* For STM32F10x connectivity line devices and STM32F100x devices: TIM3 */
+#define DAC_TRIGGER_T3_TRGO                ((uint32_t)                                   DAC_CR_TSEL1_0 | DAC_CR_TEN1)  /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#endif /* STM32F100xB || STM32F100xE || STM32F105xC || STM32F107xC */
+
+/* Availability of trigger from TIM5 and TIM15:                               */
+/*  - For STM32F10x value line devices STM32F100xB:                           */
+/*    trigger from TIM15 is available, TIM5 not available.                    */
+/*  - For STM32F10x value line devices STM32F100xE:                           */
+/*    trigger from TIM15 and TIM5 are both available,                         */
+/*    selection depends on remap (with TIM5 as default configuration).        */
+/*  - Other STM32F1 devices:                                                  */
+/*    trigger from TIM5 is available, TIM15 not  available.                   */
+#if defined (STM32F100xB)
+#define DAC_TRIGGER_T15_TRGO               ((uint32_t)(                 DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */
+#else
+
+#define DAC_TRIGGER_T5_TRGO                ((uint32_t)(                 DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+
+#if defined (STM32F100xE)
+/*!< DAC trigger availability depending on STM32F1 devices:
+     For STM32F100x high-density value line devices, the TIM15 TRGO event can be selected 
+     as replacement of TIM5 TRGO if the MISC_REMAP bit in the AFIO_MAPR2 register is set.
+     Refer to macro "__HAL_AFIO_REMAP_MISC_ENABLE()/__HAL_AFIO_REMAP_MISC_DISABLE()".
+     Otherwise, TIM5 TRGO is used and TIM15 TRGO is not used (default case).
+     For more details please refer to the AFIO section. */
+#define DAC_TRIGGER_T15_TRGO    DAC_TRIGGER_T5_TRGO
+#endif /* STM32F100xE */
+   
+#endif /* STM32F100xB */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup DACEx_Private_Macros DACEx Private Macros
+  * @{
+  */
+#if defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+                                 ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+#if defined (STM32F100xE) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+                                 ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F100xE || STM32F105xC || STM32F107xC */
+#if defined (STM32F100xB)
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE)     || \
+                                 ((TRIGGER) == DAC_TRIGGER_T6_TRGO)  || \
+                                 ((TRIGGER) == DAC_TRIGGER_T3_TRGO)  || \
+                                 ((TRIGGER) == DAC_TRIGGER_T7_TRGO)  || \
+                                 ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T2_TRGO)  || \
+                                 ((TRIGGER) == DAC_TRIGGER_T4_TRGO)  || \
+                                 ((TRIGGER) == DAC_TRIGGER_EXT_IT9)  || \
+                                 ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F100xB */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/* Extended features functions ***********************************************/
+
+/** @addtogroup DACEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DACEx_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude);
+
+HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac);
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DACEx_Private_Functions
+  * @{
+  */
+
+/* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */
+/* are called by HAL_DAC_Start_DMA */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DAC */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h

@@ -0,0 +1,211 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_def.h
+  * @author  MCD Application Team
+  * @brief   This file contains HAL common defines, enumeration, macros and
+  *          structures definitions.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_DEF
+#define __STM32F1xx_HAL_DEF
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include <stddef.h>
+#include "mcu_wrapper_conf.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  HAL Status structures definition
+  */
+typedef enum
+{
+  HAL_OK       = 0x00U,
+  HAL_ERROR    = 0x01U,
+  HAL_BUSY     = 0x02U,
+  HAL_TIMEOUT  = 0x03U
+} HAL_StatusTypeDef;
+
+/**
+  * @brief  HAL Lock structures definition
+  */
+typedef enum
+{
+  HAL_UNLOCKED = 0x00U,
+  HAL_LOCKED   = 0x01U
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#define HAL_MAX_DELAY      0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) != 0U)
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
+                        do{                                                      \
+                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
+                          } while(0U)
+
+#define UNUSED(X) (void)X      /* To avoid gcc/g++ warnings */
+
+/** @brief Reset the Handle's State field.
+  * @param __HANDLE__ specifies the Peripheral Handle.
+  * @note  This macro can be used for the following purpose:
+  *          - When the Handle is declared as local variable; before passing it as parameter
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+  *            to set to 0 the Handle's "State" field.
+  *            Otherwise, "State" field may have any random value and the first time the function
+  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
+  *            (i.e. HAL_PPP_MspInit() will not be executed).
+  *          - When there is a need to reconfigure the low level hardware: instead of calling
+  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
+  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
+  * @retval None
+  */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+/* Reserved for future use */
+#error "USE_RTOS should be 0 in the current HAL release"
+#else
+#define __HAL_LOCK(__HANDLE__)                                           \
+                                do{                                        \
+                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
+                                    {                                      \
+                                       return HAL_BUSY;                    \
+                                    }                                      \
+                                    else                                   \
+                                    {                                      \
+                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
+                                    }                                      \
+                                  }while (0U)
+
+#define __HAL_UNLOCK(__HANDLE__)                                          \
+                                  do{                                       \
+                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
+                                    }while (0U)
+#endif /* USE_RTOS */
+
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+#ifndef __weak
+#define __weak  __attribute__((weak))
+#endif
+#ifndef __packed
+#define __packed  __attribute__((packed))
+#endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __weak
+#define __weak   __attribute__((weak))
+#endif /* __weak */
+#ifndef __packed
+#define __packed __attribute__((__packed__))
+#endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+#ifndef __ALIGN_BEGIN
+#define __ALIGN_BEGIN
+#endif
+#ifndef __ALIGN_END
+#define __ALIGN_END      __attribute__ ((aligned (4)))
+#endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __ALIGN_END
+#define __ALIGN_END    __attribute__ ((aligned (4)))
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#define __ALIGN_BEGIN
+#endif /* __ALIGN_BEGIN */
+#else
+#ifndef __ALIGN_END
+#define __ALIGN_END
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#if defined   (__CC_ARM)      /* ARM Compiler V5*/
+#define __ALIGN_BEGIN    __align(4)
+#elif defined (__ICCARM__)    /* IAR Compiler */
+#define __ALIGN_BEGIN
+#endif /* __CC_ARM */
+#endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+  * @brief  __RAM_FUNC definition
+  */
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+/* ARM Compiler V4/V5 and V6
+   --------------------------
+   RAM functions are defined using the toolchain options.
+   Functions that are executed in RAM should reside in a separate source module.
+   Using the 'Options for File' dialog you can simply change the 'Code / Const'
+   area of a module to a memory space in physical RAM.
+   Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+   dialog.
+*/
+#define __RAM_FUNC
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+   RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc
+
+#elif defined   (  __GNUC__  )
+/* GNU Compiler
+   ------------
+  RAM functions are defined using a specific toolchain attribute
+   "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+  * @brief  __NOINLINE definition
+  */
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined   (  __GNUC__  )
+/* ARM V4/V5 and V6 & GNU Compiler
+   -------------------------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F1xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h

@@ -0,0 +1,457 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_dma.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_DMA_H
+#define __STM32F1xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+  * @{
+  */
+
+/**
+  * @brief  DMA Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Direction;                 /*!< Specifies if the data will be transferred from memory to peripheral, 
+                                           from memory to memory or from peripheral to memory.
+                                           This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+  uint32_t PeriphInc;                 /*!< Specifies whether the Peripheral address register should be incremented or not.
+                                           This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+  uint32_t MemInc;                    /*!< Specifies whether the memory address register should be incremented or not.
+                                           This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+  uint32_t PeriphDataAlignment;       /*!< Specifies the Peripheral data width.
+                                           This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+  uint32_t MemDataAlignment;          /*!< Specifies the Memory data width.
+                                           This parameter can be a value of @ref DMA_Memory_data_size */
+
+  uint32_t Mode;                      /*!< Specifies the operation mode of the DMAy Channelx.
+                                           This parameter can be a value of @ref DMA_mode
+                                           @note The circular buffer mode cannot be used if the memory-to-memory
+                                                 data transfer is configured on the selected Channel */
+
+  uint32_t Priority;                  /*!< Specifies the software priority for the DMAy Channelx.
+                                           This parameter can be a value of @ref DMA_Priority_level */
+} DMA_InitTypeDef;
+
+/**
+  * @brief  HAL DMA State structures definition
+  */
+typedef enum
+{
+  HAL_DMA_STATE_RESET             = 0x00U,  /*!< DMA not yet initialized or disabled    */
+  HAL_DMA_STATE_READY             = 0x01U,  /*!< DMA initialized and ready for use      */
+  HAL_DMA_STATE_BUSY              = 0x02U,  /*!< DMA process is ongoing                 */
+  HAL_DMA_STATE_TIMEOUT           = 0x03U   /*!< DMA timeout state                      */
+}HAL_DMA_StateTypeDef;
+
+/**
+  * @brief  HAL DMA Error Code structure definition
+  */
+typedef enum
+{
+  HAL_DMA_FULL_TRANSFER           = 0x00U,    /*!< Full transfer     */
+  HAL_DMA_HALF_TRANSFER           = 0x01U     /*!< Half Transfer     */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/** 
+  * @brief  HAL DMA Callback ID structure definition
+  */
+typedef enum
+{
+  HAL_DMA_XFER_CPLT_CB_ID          = 0x00U,    /*!< Full transfer     */
+  HAL_DMA_XFER_HALFCPLT_CB_ID      = 0x01U,    /*!< Half transfer     */
+  HAL_DMA_XFER_ERROR_CB_ID         = 0x02U,    /*!< Error             */ 
+  HAL_DMA_XFER_ABORT_CB_ID         = 0x03U,    /*!< Abort             */ 
+  HAL_DMA_XFER_ALL_CB_ID           = 0x04U     /*!< All               */ 
+    
+}HAL_DMA_CallbackIDTypeDef;
+
+/** 
+  * @brief  DMA handle Structure definition
+  */
+typedef struct __DMA_HandleTypeDef
+{
+  DMA_Channel_TypeDef   *Instance;                       /*!< Register base address                  */
+  
+  DMA_InitTypeDef       Init;                            /*!< DMA communication parameters           */ 
+  
+  HAL_LockTypeDef       Lock;                            /*!< DMA locking object                     */  
+  
+  HAL_DMA_StateTypeDef  State;                           /*!< DMA transfer state                     */
+  
+  void                  *Parent;                                                      /*!< Parent object state                    */  
+  
+  void                  (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma);     /*!< DMA transfer complete callback         */
+  
+  void                  (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback    */
+  
+  void                  (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma);    /*!< DMA transfer error callback            */
+
+  void                  (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma);    /*!< DMA transfer abort callback            */  
+  
+  __IO uint32_t         ErrorCode;                                                    /*!< DMA Error code                         */
+
+  DMA_TypeDef            *DmaBaseAddress;                                             /*!< DMA Channel Base Address               */
+  
+  uint32_t               ChannelIndex;                                                /*!< DMA Channel Index                      */  
+
+} DMA_HandleTypeDef;    
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+  * @{
+  */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+  * @{
+  */
+#define HAL_DMA_ERROR_NONE                     0x00000000U    /*!< No error             */
+#define HAL_DMA_ERROR_TE                       0x00000001U    /*!< Transfer error       */
+#define HAL_DMA_ERROR_NO_XFER                  0x00000004U    /*!< no ongoing transfer  */
+#define HAL_DMA_ERROR_TIMEOUT                  0x00000020U    /*!< Timeout error        */
+#define HAL_DMA_ERROR_NOT_SUPPORTED            0x00000100U    /*!< Not supported mode                    */ 
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+  * @{
+  */
+#define DMA_PERIPH_TO_MEMORY         0x00000000U                 /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH         ((uint32_t)DMA_CCR_DIR)     /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY         ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction     */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+  * @{
+  */
+#define DMA_PINC_ENABLE        ((uint32_t)DMA_CCR_PINC)  /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE       0x00000000U               /*!< Peripheral increment mode Disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+  * @{
+  */
+#define DMA_MINC_ENABLE         ((uint32_t)DMA_CCR_MINC)  /*!< Memory increment mode Enable  */
+#define DMA_MINC_DISABLE        0x00000000U               /*!< Memory increment mode Disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+  * @{
+  */
+#define DMA_PDATAALIGN_BYTE          0x00000000U                  /*!< Peripheral data alignment: Byte     */
+#define DMA_PDATAALIGN_HALFWORD      ((uint32_t)DMA_CCR_PSIZE_0)  /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD          ((uint32_t)DMA_CCR_PSIZE_1)  /*!< Peripheral data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+  * @{
+  */
+#define DMA_MDATAALIGN_BYTE          0x00000000U                  /*!< Memory data alignment: Byte     */
+#define DMA_MDATAALIGN_HALFWORD      ((uint32_t)DMA_CCR_MSIZE_0)  /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD          ((uint32_t)DMA_CCR_MSIZE_1)  /*!< Memory data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_mode DMA mode
+  * @{
+  */
+#define DMA_NORMAL         0x00000000U                  /*!< Normal mode                  */
+#define DMA_CIRCULAR       ((uint32_t)DMA_CCR_CIRC)     /*!< Circular mode                */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+  * @{
+  */
+#define DMA_PRIORITY_LOW             0x00000000U               /*!< Priority level : Low       */
+#define DMA_PRIORITY_MEDIUM          ((uint32_t)DMA_CCR_PL_0)  /*!< Priority level : Medium    */
+#define DMA_PRIORITY_HIGH            ((uint32_t)DMA_CCR_PL_1)  /*!< Priority level : High      */
+#define DMA_PRIORITY_VERY_HIGH       ((uint32_t)DMA_CCR_PL)    /*!< Priority level : Very_High */
+/**
+  * @}
+  */
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+  * @{
+  */
+#define DMA_IT_TC                         ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT                         ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE                         ((uint32_t)DMA_CCR_TEIE)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+  * @{
+  */
+#define DMA_FLAG_GL1                      0x00000001U
+#define DMA_FLAG_TC1                      0x00000002U
+#define DMA_FLAG_HT1                      0x00000004U
+#define DMA_FLAG_TE1                      0x00000008U
+#define DMA_FLAG_GL2                      0x00000010U
+#define DMA_FLAG_TC2                      0x00000020U
+#define DMA_FLAG_HT2                      0x00000040U
+#define DMA_FLAG_TE2                      0x00000080U
+#define DMA_FLAG_GL3                      0x00000100U
+#define DMA_FLAG_TC3                      0x00000200U
+#define DMA_FLAG_HT3                      0x00000400U
+#define DMA_FLAG_TE3                      0x00000800U
+#define DMA_FLAG_GL4                      0x00001000U
+#define DMA_FLAG_TC4                      0x00002000U
+#define DMA_FLAG_HT4                      0x00004000U
+#define DMA_FLAG_TE4                      0x00008000U
+#define DMA_FLAG_GL5                      0x00010000U
+#define DMA_FLAG_TC5                      0x00020000U
+#define DMA_FLAG_HT5                      0x00040000U
+#define DMA_FLAG_TE5                      0x00080000U
+#define DMA_FLAG_GL6                      0x00100000U
+#define DMA_FLAG_TC6                      0x00200000U
+#define DMA_FLAG_HT6                      0x00400000U
+#define DMA_FLAG_TE6                      0x00800000U
+#define DMA_FLAG_GL7                      0x01000000U
+#define DMA_FLAG_TC7                      0x02000000U
+#define DMA_FLAG_HT7                      0x04000000U
+#define DMA_FLAG_TE7                      0x08000000U
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+  * @{
+  */
+
+/** @brief  Reset DMA handle state.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+  * @brief  Enable the specified DMA Channel.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE(__HANDLE__)        (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
+
+/**
+  * @brief  Disable the specified DMA Channel.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE(__HANDLE__)       (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
+
+
+/* Interrupt & Flag management */
+
+/**
+  * @brief  Enables the specified DMA Channel interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__)))
+
+/**
+  * @brief  Disable the specified DMA Channel interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__)))
+
+/**
+  * @brief  Check whether the specified DMA Channel interrupt is enabled or not.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval The state of DMA_IT (SET or RESET).
+  */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+  * @brief  Return the number of remaining data units in the current DMA Channel transfer.
+  * @param  __HANDLE__: DMA handle
+  * @retval The number of remaining data units in the current DMA Channel transfer.
+  */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
+
+/**
+  * @}
+  */
+
+/* Include DMA HAL Extension module */
+#include "stm32f1xx_hal_dma_ex.h"   
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+  * @{
+  */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_PERIPH)  || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+                                            ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE)  || \
+                                        ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE)     || \
+                                           ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+                                           ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE)     || \
+                                       ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+                                       ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL )  || \
+                           ((MODE) == DMA_CIRCULAR))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW )   || \
+                                   ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+                                   ((PRIORITY) == DMA_PRIORITY_HIGH)   || \
+                                   ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h

@@ -0,0 +1,277 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_dma_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_DMA_EX_H
+#define __STM32F1xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMAEx DMAEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros
+  * @{
+  */
+/* Interrupt & Flag management */
+#if defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || \
+    defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/** @defgroup DMAEx_High_density_XL_density_Product_devices DMAEx High density and XL density product devices
+  * @{
+  */
+
+/**
+  * @brief  Returns the current DMA Channel transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer complete flag index.
+  */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+   DMA_FLAG_TC5)
+
+/**
+  * @brief  Returns the current DMA Channel half transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified half transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+   DMA_FLAG_HT5)
+
+/**
+  * @brief  Returns the current DMA Channel transfer error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+   DMA_FLAG_TE5)
+
+/**
+  * @brief  Return the current DMA Channel Global interrupt flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\
+   DMA_FLAG_GL5)
+   
+/**
+  * @brief  Get the DMA Channel pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+  (DMA1->ISR & (__FLAG__)))
+
+/**
+  * @brief  Clears the DMA Channel pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.   
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+  (DMA1->IFCR = (__FLAG__)))
+
+/**
+  * @}
+  */
+
+#else
+/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices
+  * @{
+  */
+
+/**
+  * @brief  Returns the current DMA Channel transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer complete flag index.
+  */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+   DMA_FLAG_TC7)
+
+/**
+  * @brief  Return the current DMA Channel half transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified half transfer complete flag index.
+  */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+   DMA_FLAG_HT7)
+
+/**
+  * @brief  Return the current DMA Channel transfer error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+   DMA_FLAG_TE7)
+
+/**
+  * @brief  Return the current DMA Channel Global interrupt flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+   DMA_FLAG_GL7)
+
+/**
+  * @brief  Get the DMA Channel pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *            @arg DMA_FLAG_GLx:  Global interrupt flag
+  *         Where x can be 1_7 to select the DMA Channel flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)   (DMA1->ISR & (__FLAG__))
+
+/**
+  * @brief  Clear the DMA Channel pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *            @arg DMA_FLAG_GLx:  Global interrupt flag
+  *         Where x can be 1_7 to select the DMA Channel flag.   
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+/**
+  * @}
+  */
+
+#endif
+  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || */
+       /* STM32F103xG || STM32F105xC || STM32F107xC */
+
+#endif /* __STM32F1xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_eth.h

@@ -0,0 +1,2145 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_eth.h
+  * @author  MCD Application Team
+  * @brief   Header file of ETH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_ETH_H
+#define __STM32F1xx_HAL_ETH_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+#if defined (ETH)
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ETH
+  * @{
+  */
+
+/** @addtogroup ETH_Private_Macros
+  * @{
+  */
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20U)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+                                     ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+                             ((SPEED) == ETH_SPEED_100M))
+#define IS_ETH_DUPLEX_MODE(MODE)  (((MODE) == ETH_MODE_FULLDUPLEX) || \
+                                  ((MODE) == ETH_MODE_HALFDUPLEX))
+#define IS_ETH_RX_MODE(MODE)    (((MODE) == ETH_RXPOLLING_MODE) || \
+                                 ((MODE) == ETH_RXINTERRUPT_MODE))
+#define IS_ETH_CHECKSUM_MODE(MODE)    (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+                                      ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+#define IS_ETH_MEDIA_INTERFACE(MODE)         (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+                                              ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+                              ((CMD) == ETH_WATCHDOG_DISABLE))
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+                            ((CMD) == ETH_JABBER_DISABLE))
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+                                   ((CMD) == ETH_CARRIERSENCE_DISABLE))
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+                                 ((CMD) == ETH_RECEIVEOWN_DISABLE))
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+                                   ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+                                      ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+                                        ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+                                            ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_1))
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+                                    ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+                                 ((CMD) == ETH_RECEIVEAll_DISABLE))
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+                                        ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+                                        ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+                                     ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+                                     ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+                                                ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+                                                ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+#define IS_ETH_PROMISCUOUS_MODE(CMD) (((CMD) == ETH_PROMISCUOUS_MODE_ENABLE) || \
+                                      ((CMD) == ETH_PROMISCUOUS_MODE_DISABLE))
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+                                              ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+                                              ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFFU)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD)   (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+                                        ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+                                                ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+                                         ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+                                          ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+                                                ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFFU)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+                                        ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+                                        ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+                                           ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+                                               ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+                                           ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+                                         ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+                                            ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+                                          ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+                                                    ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+                                          ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+                                           ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+                                 ((CMD) == ETH_FIXEDBURST_DISABLE))
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1FU)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+                                         ((FLAG) == ETH_DMATXDESC_IC) || \
+                                         ((FLAG) == ETH_DMATXDESC_LS) || \
+                                         ((FLAG) == ETH_DMATXDESC_FS) || \
+                                         ((FLAG) == ETH_DMATXDESC_DC) || \
+                                         ((FLAG) == ETH_DMATXDESC_DP) || \
+                                         ((FLAG) == ETH_DMATXDESC_TTSE) || \
+                                         ((FLAG) == ETH_DMATXDESC_TER) || \
+                                         ((FLAG) == ETH_DMATXDESC_TCH) || \
+                                         ((FLAG) == ETH_DMATXDESC_TTSS) || \
+                                         ((FLAG) == ETH_DMATXDESC_IHE) || \
+                                         ((FLAG) == ETH_DMATXDESC_ES) || \
+                                         ((FLAG) == ETH_DMATXDESC_JT) || \
+                                         ((FLAG) == ETH_DMATXDESC_FF) || \
+                                         ((FLAG) == ETH_DMATXDESC_PCE) || \
+                                         ((FLAG) == ETH_DMATXDESC_LCA) || \
+                                         ((FLAG) == ETH_DMATXDESC_NC) || \
+                                         ((FLAG) == ETH_DMATXDESC_LCO) || \
+                                         ((FLAG) == ETH_DMATXDESC_EC) || \
+                                         ((FLAG) == ETH_DMATXDESC_VF) || \
+                                         ((FLAG) == ETH_DMATXDESC_CC) || \
+                                         ((FLAG) == ETH_DMATXDESC_ED) || \
+                                         ((FLAG) == ETH_DMATXDESC_UF) || \
+                                         ((FLAG) == ETH_DMATXDESC_DB))
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+                                            ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFFU)
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+                                         ((FLAG) == ETH_DMARXDESC_AFM) || \
+                                         ((FLAG) == ETH_DMARXDESC_ES) || \
+                                         ((FLAG) == ETH_DMARXDESC_DE) || \
+                                         ((FLAG) == ETH_DMARXDESC_SAF) || \
+                                         ((FLAG) == ETH_DMARXDESC_LE) || \
+                                         ((FLAG) == ETH_DMARXDESC_OE) || \
+                                         ((FLAG) == ETH_DMARXDESC_VLAN) || \
+                                         ((FLAG) == ETH_DMARXDESC_FS) || \
+                                         ((FLAG) == ETH_DMARXDESC_LS) || \
+                                         ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+                                         ((FLAG) == ETH_DMARXDESC_LC) || \
+                                         ((FLAG) == ETH_DMARXDESC_FT) || \
+                                         ((FLAG) == ETH_DMARXDESC_RWT) || \
+                                         ((FLAG) == ETH_DMARXDESC_RE) || \
+                                         ((FLAG) == ETH_DMARXDESC_DBE) || \
+                                         ((FLAG) == ETH_DMARXDESC_CE) || \
+                                         ((FLAG) == ETH_DMARXDESC_MAMPCE))
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+                                          ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+                                   ((FLAG) == ETH_PMT_FLAG_MPR))
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & 0xC7FE1800U) == 0x00U) && ((FLAG) != 0x00U))
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+                                   ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+                                   ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+                                   ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+                                   ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+                                   ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+                                   ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+                                   ((FLAG) == ETH_DMA_FLAG_T))
+#define IS_ETH_MAC_IT(IT) ((((IT) & 0xFFFFFDF1U) == 0x00U) && ((IT) != 0x00U))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+                               ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+                               ((IT) == ETH_MAC_IT_PMT))
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+                                   ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+                                   ((FLAG) == ETH_MAC_FLAG_PMT))
+#define IS_ETH_DMA_IT(IT) ((((IT) & 0xC7FE1800U) == 0x00U) && ((IT) != 0x00U))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+                               ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+                               ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+                               ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+                               ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+                               ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+                               ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+                               ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+                               ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+                                           ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+#define IS_ETH_MMC_IT(IT) (((((IT) & 0xFFDF3FFFU) == 0x00U) || (((IT) & 0xEFFDFF9FU) == 0x00U)) && \
+                           ((IT) != 0x00U))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+                               ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+                               ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+                                                ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+/**
+  * @}
+  */
+
+/** @addtogroup ETH_Private_Defines
+  * @{
+  */
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY     0x00000001U
+
+/* ETHERNET Errors */
+#define  ETH_SUCCESS            0U
+#define  ETH_ERROR              1U
+
+/* ETHERNET DMA Tx descriptors Collision Count Shift */
+#define  ETH_DMATXDESC_COLLISION_COUNTSHIFT        3U
+
+/* ETHERNET DMA Tx descriptors Buffer2 Size Shift */
+#define  ETH_DMATXDESC_BUFFER2_SIZESHIFT           16U
+
+/* ETHERNET DMA Rx descriptors Frame Length Shift */
+#define  ETH_DMARXDESC_FRAME_LENGTHSHIFT           16U
+
+/* ETHERNET DMA Rx descriptors Buffer2 Size Shift */
+#define  ETH_DMARXDESC_BUFFER2_SIZESHIFT           16U
+
+/* ETHERNET DMA Rx descriptors Frame length Shift */
+#define  ETH_DMARXDESC_FRAMELENGTHSHIFT            16U
+
+/* ETHERNET MAC address offsets */
+#define ETH_MAC_ADDR_HBASE    (uint32_t)(ETH_MAC_BASE + 0x40U)  /* ETHERNET MAC address high offset */
+#define ETH_MAC_ADDR_LBASE    (uint32_t)(ETH_MAC_BASE + 0x44U)  /* ETHERNET MAC address low offset */
+
+/* ETHERNET MACMIIAR register Mask */
+#define ETH_MACMIIAR_CR_MASK    0xFFFFFFE3U
+
+/* ETHERNET MACCR register Mask */
+#define ETH_MACCR_CLEAR_MASK    0xFF20810FU
+
+/* ETHERNET MACFCR register Mask */
+#define ETH_MACFCR_CLEAR_MASK   0x0000FF41U
+
+/* ETHERNET DMAOMR register Mask */
+#define ETH_DMAOMR_CLEAR_MASK   0xF8DE3F23U
+
+/* ETHERNET Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH      8U
+
+/* ETHERNET Missed frames counter Shift */
+#define  ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT     17U
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Types ETH Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_ETH_STATE_RESET             = 0x00U,    /*!< Peripheral not yet Initialized or disabled         */
+  HAL_ETH_STATE_READY             = 0x01U,    /*!< Peripheral Initialized and ready for use           */
+  HAL_ETH_STATE_BUSY              = 0x02U,    /*!< an internal process is ongoing                     */
+  HAL_ETH_STATE_BUSY_TX           = 0x12U,    /*!< Data Transmission process is ongoing               */
+  HAL_ETH_STATE_BUSY_RX           = 0x22U,    /*!< Data Reception process is ongoing                  */
+  HAL_ETH_STATE_BUSY_TX_RX        = 0x32U,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_ETH_STATE_BUSY_WR           = 0x42U,    /*!< Write process is ongoing                           */
+  HAL_ETH_STATE_BUSY_RD           = 0x82U,    /*!< Read process is ongoing                            */
+  HAL_ETH_STATE_TIMEOUT           = 0x03U,    /*!< Timeout state                                      */
+  HAL_ETH_STATE_ERROR             = 0x04U     /*!< Reception process is ongoing                       */
+} HAL_ETH_StateTypeDef;
+
+/**
+  * @brief  ETH Init Structure definition
+  */
+
+typedef struct
+{
+  uint32_t             AutoNegotiation;           /*!< Selects or not the AutoNegotiation mode for the external PHY
+                                                           The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+                                                           and the mode (half/full-duplex).
+                                                           This parameter can be a value of @ref ETH_AutoNegotiation */
+
+  uint32_t             Speed;                     /*!< Sets the Ethernet speed: 10/100 Mbps.
+                                                           This parameter can be a value of @ref ETH_Speed */
+
+  uint32_t             DuplexMode;                /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+                                                           This parameter can be a value of @ref ETH_Duplex_Mode */
+
+  uint16_t             PhyAddress;                /*!< Ethernet PHY address.
+                                                           This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+  uint8_t             *MACAddr;                   /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+
+  uint32_t             RxMode;                    /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+                                                           This parameter can be a value of @ref ETH_Rx_Mode */
+
+  uint32_t             ChecksumMode;              /*!< Selects if the checksum is check by hardware or by software.
+                                                         This parameter can be a value of @ref ETH_Checksum_Mode */
+
+  uint32_t             MediaInterface;            /*!< Selects the media-independent interface or the reduced media-independent interface.
+                                                         This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+/**
+ * @brief  ETH MAC Configuration Structure definition
+ */
+
+typedef struct
+{
+  uint32_t             Watchdog;                  /*!< Selects or not the Watchdog timer
+                                                           When enabled, the MAC allows no more then 2048 bytes to be received.
+                                                           When disabled, the MAC can receive up to 16384 bytes.
+                                                           This parameter can be a value of @ref ETH_Watchdog */
+
+  uint32_t             Jabber;                    /*!< Selects or not Jabber timer
+                                                           When enabled, the MAC allows no more then 2048 bytes to be sent.
+                                                           When disabled, the MAC can send up to 16384 bytes.
+                                                           This parameter can be a value of @ref ETH_Jabber */
+
+  uint32_t             InterFrameGap;             /*!< Selects the minimum IFG between frames during transmission.
+                                                           This parameter can be a value of @ref ETH_Inter_Frame_Gap */
+
+  uint32_t             CarrierSense;              /*!< Selects or not the Carrier Sense.
+                                                           This parameter can be a value of @ref ETH_Carrier_Sense */
+
+  uint32_t             ReceiveOwn;                /*!< Selects or not the ReceiveOwn,
+                                                           ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+                                                           in Half-Duplex mode.
+                                                           This parameter can be a value of @ref ETH_Receive_Own */
+
+  uint32_t             LoopbackMode;              /*!< Selects or not the internal MAC MII Loopback mode.
+                                                           This parameter can be a value of @ref ETH_Loop_Back_Mode */
+
+  uint32_t             ChecksumOffload;           /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+                                                           This parameter can be a value of @ref ETH_Checksum_Offload */
+
+  uint32_t             RetryTransmission;         /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+                                                           when a collision occurs (Half-Duplex mode).
+                                                           This parameter can be a value of @ref ETH_Retry_Transmission */
+
+  uint32_t             AutomaticPadCRCStrip;      /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+                                                           This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
+
+  uint32_t             BackOffLimit;              /*!< Selects the BackOff limit value.
+                                                           This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+  uint32_t             DeferralCheck;             /*!< Selects or not the deferral check function (Half-Duplex mode).
+                                                           This parameter can be a value of @ref ETH_Deferral_Check */
+
+  uint32_t             ReceiveAll;                /*!< Selects or not all frames reception by the MAC (No filtering).
+                                                           This parameter can be a value of @ref ETH_Receive_All */
+
+  uint32_t             SourceAddrFilter;          /*!< Selects the Source Address Filter mode.
+                                                           This parameter can be a value of @ref ETH_Source_Addr_Filter */
+
+  uint32_t             PassControlFrames;         /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
+                                                           This parameter can be a value of @ref ETH_Pass_Control_Frames */
+
+  uint32_t             BroadcastFramesReception;  /*!< Selects or not the reception of Broadcast Frames.
+                                                           This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+  uint32_t             DestinationAddrFilter;     /*!< Sets the destination filter mode for both unicast and multicast frames.
+                                                           This parameter can be a value of @ref ETH_Destination_Addr_Filter */
+
+  uint32_t             PromiscuousMode;           /*!< Selects or not the Promiscuous Mode
+                                                           This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+  uint32_t             MulticastFramesFilter;     /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+                                                           This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
+
+  uint32_t             UnicastFramesFilter;       /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+                                                           This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
+
+  uint32_t             HashTableHigh;             /*!< This field holds the higher 32 bits of Hash table.
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFFU */
+
+  uint32_t             HashTableLow;              /*!< This field holds the lower 32 bits of Hash table.
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFFU  */
+
+  uint32_t             PauseTime;                 /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFU */
+
+  uint32_t             ZeroQuantaPause;           /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+                                                           This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
+
+  uint32_t             PauseLowThreshold;         /*!< This field configures the threshold of the PAUSE to be checked for
+                                                           automatic retransmission of PAUSE Frame.
+                                                           This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+
+  uint32_t             UnicastPauseFrameDetect;   /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+                                                           unicast address and unique multicast address).
+                                                           This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
+
+  uint32_t             ReceiveFlowControl;        /*!< Enables or disables the MAC to decode the received Pause frame and
+                                                           disable its transmitter for a specified time (Pause Time)
+                                                           This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+  uint32_t             TransmitFlowControl;       /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+                                                           or the MAC back-pressure operation (Half-Duplex mode)
+                                                           This parameter can be a value of @ref ETH_Transmit_Flow_Control */
+
+  uint32_t             VLANTagComparison;         /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+                                                           comparison and filtering.
+                                                           This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
+
+  uint32_t             VLANTagIdentifier;         /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+/**
+  * @brief  ETH DMA Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t              DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+                                                             This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
+
+  uint32_t             ReceiveStoreForward;         /*!< Enables or disables the Receive store and forward mode.
+                                                             This parameter can be a value of @ref ETH_Receive_Store_Forward */
+
+  uint32_t             FlushReceivedFrame;          /*!< Enables or disables the flushing of received frames.
+                                                             This parameter can be a value of @ref ETH_Flush_Received_Frame */
+
+  uint32_t             TransmitStoreForward;        /*!< Enables or disables Transmit store and forward mode.
+                                                             This parameter can be a value of @ref ETH_Transmit_Store_Forward */
+
+  uint32_t             TransmitThresholdControl;    /*!< Selects or not the Transmit Threshold Control.
+                                                             This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+  uint32_t             ForwardErrorFrames;          /*!< Selects or not the forward to the DMA of erroneous frames.
+                                                             This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+  uint32_t             ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+                                                             and length less than 64 bytes) including pad-bytes and CRC)
+                                                             This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+  uint32_t             ReceiveThresholdControl;     /*!< Selects the threshold level of the Receive FIFO.
+                                                             This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+  uint32_t             SecondFrameOperate;          /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+                                                             frame of Transmit data even before obtaining the status for the first frame.
+                                                             This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+  uint32_t             AddressAlignedBeats;         /*!< Enables or disables the Address Aligned Beats.
+                                                             This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+  uint32_t             FixedBurst;                  /*!< Enables or disables the AHB Master interface fixed burst transfers.
+                                                             This parameter can be a value of @ref ETH_Fixed_Burst */
+
+  uint32_t             RxDMABurstLength;            /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+                                                             This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
+
+  uint32_t             TxDMABurstLength;            /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+                                                             This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+
+  uint32_t             DescriptorSkipLength;        /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+                                                             This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+  uint32_t             DMAArbitration;              /*!< Selects the DMA Tx/Rx arbitration.
+                                                             This parameter can be a value of @ref ETH_DMA_Arbitration */
+} ETH_DMAInitTypeDef;
+
+
+/**
+  * @brief  ETH DMA Descriptors data structure definition
+  */
+
+typedef struct
+{
+  __IO uint32_t   Status;           /*!< Status */
+
+  uint32_t   ControlBufferSize;     /*!< Control and Buffer1, Buffer2 lengths */
+
+  uint32_t   Buffer1Addr;           /*!< Buffer1 address pointer */
+
+  uint32_t   Buffer2NextDescAddr;   /*!< Buffer2 or next descriptor address pointer */
+
+} ETH_DMADescTypeDef;
+
+/**
+  * @brief  Received Frame Informations structure definition
+  */
+typedef struct
+{
+  ETH_DMADescTypeDef *FSRxDesc;          /*!< First Segment Rx Desc */
+
+  ETH_DMADescTypeDef *LSRxDesc;          /*!< Last Segment Rx Desc */
+
+  uint32_t  SegCount;                    /*!< Segment count */
+
+  uint32_t length;                       /*!< Frame length */
+
+  uint32_t buffer;                       /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+/**
+  * @brief  ETH Handle Structure definition
+  */
+
+#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1)
+typedef struct __ETH_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */
+{
+  ETH_TypeDef                *Instance;     /*!< Register base address       */
+
+  ETH_InitTypeDef            Init;          /*!< Ethernet Init Configuration */
+
+  uint32_t                   LinkStatus;    /*!< Ethernet link status        */
+
+  ETH_DMADescTypeDef         *RxDesc;       /*!< Rx descriptor to Get        */
+
+  ETH_DMADescTypeDef         *TxDesc;       /*!< Tx descriptor to Set        */
+
+  ETH_DMARxFrameInfos        RxFrameInfos;  /*!< last Rx frame infos         */
+
+  __IO HAL_ETH_StateTypeDef  State;         /*!< ETH communication state     */
+
+  HAL_LockTypeDef            Lock;          /*!< ETH Lock                    */
+
+#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1)
+
+  void (* TxCpltCallback)(struct __ETH_HandleTypeDef *heth);            /*!< ETH Tx Complete Callback   */
+  void (* RxCpltCallback)(struct __ETH_HandleTypeDef *heth);            /*!< ETH Rx  Complete Callback   */
+  void (* DMAErrorCallback)(struct __ETH_HandleTypeDef *heth);          /*!< DMA Error Callback      */
+  void (* MspInitCallback)(struct __ETH_HandleTypeDef *heth);           /*!< ETH Msp Init callback       */
+  void (* MspDeInitCallback)(struct __ETH_HandleTypeDef *heth);         /*!< ETH Msp DeInit callback     */
+
+#endif  /* USE_HAL_ETH_REGISTER_CALLBACKS */
+
+} ETH_HandleTypeDef;
+
+#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL ETH Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_ETH_MSPINIT_CB_ID            = 0x00U,    /*!< ETH MspInit callback ID            */
+  HAL_ETH_MSPDEINIT_CB_ID          = 0x01U,    /*!< ETH MspDeInit callback ID          */
+  HAL_ETH_TX_COMPLETE_CB_ID        = 0x02U,    /*!< ETH Tx Complete Callback ID        */
+  HAL_ETH_RX_COMPLETE_CB_ID        = 0x03U,    /*!< ETH Rx Complete Callback ID        */
+  HAL_ETH_DMA_ERROR_CB_ID          = 0x04U,    /*!< ETH DMA Error Callback ID          */
+
+} HAL_ETH_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL ETH Callback pointer definition
+  */
+typedef  void (*pETH_CallbackTypeDef)(ETH_HandleTypeDef *heth);  /*!< pointer to an ETH callback function */
+
+#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ETH_Exported_Constants ETH Exported Constants
+  * @{
+  */
+
+/** @defgroup ETH_Buffers_setting ETH Buffers setting
+  * @{
+  */
+#define ETH_MAX_PACKET_SIZE       1524U    /*!< ETH_HEADER + ETH_EXTRA + ETH_VLAN_TAG + ETH_MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER                14U      /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC                   4U       /*!< Ethernet CRC */
+#define ETH_EXTRA                 2U       /*!< Extra bytes in some cases */
+#define ETH_VLAN_TAG              4U       /*!< optional 802.1q VLAN Tag */
+#define ETH_MIN_ETH_PAYLOAD       46U      /*!< Minimum Ethernet payload size */
+#define ETH_MAX_ETH_PAYLOAD       1500U    /*!< Maximum Ethernet payload size */
+#define ETH_JUMBO_FRAME_PAYLOAD   9000U    /*!< Jumbo frame payload size */
+
+/* Ethernet driver receive buffers are organized in a chained linked-list, when
+   an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+   to the driver receive buffers memory.
+
+   Depending on the size of the received ethernet packet and the size of
+   each ethernet driver receive buffer, the received packet can take one or more
+   ethernet driver receive buffer.
+
+   In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE
+   and the total count of the driver receive buffers ETH_RXBUFNB.
+
+   The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as
+   example, they can be reconfigured in the application layer to fit the application
+   needs */
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+   packet */
+#ifndef ETH_RX_BUF_SIZE
+#define ETH_RX_BUF_SIZE         ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/
+#ifndef ETH_RXBUFNB
+#define ETH_RXBUFNB             5U     /*  5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+/* Ethernet driver transmit buffers are organized in a chained linked-list, when
+   an ethernet packet is transmitted, Tx-DMA will transfer the packet from the
+   driver transmit buffers memory to the TxFIFO.
+
+   Depending on the size of the Ethernet packet to be transmitted and the size of
+   each ethernet driver transmit buffer, the packet to be transmitted can take
+   one or more ethernet driver transmit buffer.
+
+   In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE
+   and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+   The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as
+   example, they can be reconfigured in the application layer to fit the application
+   needs */
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+   packet */
+#ifndef ETH_TX_BUF_SIZE
+#define ETH_TX_BUF_SIZE         ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 ethernet driver transmit buffers are used (in a chained linked list)*/
+#ifndef ETH_TXBUFNB
+#define ETH_TXBUFNB             5U      /* 5  Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor
+  * @{
+  */
+
+/*
+   DMA Tx Descriptor
+  -----------------------------------------------------------------------------------------------
+  TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+  -----------------------------------------------------------------------------------------------
+  TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+  -----------------------------------------------------------------------------------------------
+  TDES2 |                         Buffer1 Address [31:0]                                         |
+  -----------------------------------------------------------------------------------------------
+  TDES3 |                   Buffer2 Address [31:0] / Next Descriptor Address [31:0]              |
+  -----------------------------------------------------------------------------------------------
+*/
+
+/**
+  * @brief  Bit definition of TDES0 register: DMA Tx descriptor status register
+  */
+#define ETH_DMATXDESC_OWN                     0x80000000U  /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC                      0x40000000U  /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS                      0x20000000U  /*!< Last Segment */
+#define ETH_DMATXDESC_FS                      0x10000000U  /*!< First Segment */
+#define ETH_DMATXDESC_DC                      0x08000000U  /*!< Disable CRC */
+#define ETH_DMATXDESC_DP                      0x04000000U  /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE                    0x02000000U  /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC                     0x00C00000U  /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS              0x00000000U  /*!< Do Nothing: Checksum Engine is bypassed */
+#define ETH_DMATXDESC_CIC_IPV4HEADER          0x00400000U  /*!< IPV4 header Checksum Insertion */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT  0x00800000U  /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL     0x00C00000U  /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */
+#define ETH_DMATXDESC_TER                     0x00200000U  /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH                     0x00100000U  /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS                    0x00020000U  /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE                     0x00010000U  /*!< IP Header Error */
+#define ETH_DMATXDESC_ES                      0x00008000U  /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT                      0x00004000U  /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF                      0x00002000U  /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE                     0x00001000U  /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA                     0x00000800U  /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC                      0x00000400U  /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO                     0x00000200U  /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC                      0x00000100U  /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF                      0x00000080U  /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC                      0x00000078U  /*!< Collision Count */
+#define ETH_DMATXDESC_ED                      0x00000004U  /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF                      0x00000002U  /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB                      0x00000001U  /*!< Deferred Bit */
+
+/**
+  * @brief  Bit definition of TDES1 register
+  */
+#define ETH_DMATXDESC_TBS2  0x1FFF0000U  /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1  0x00001FFFU  /*!< Transmit Buffer1 Size */
+
+/**
+  * @brief  Bit definition of TDES2 register
+  */
+#define ETH_DMATXDESC_B1AP  0xFFFFFFFFU  /*!< Buffer1 Address Pointer */
+
+/**
+  * @brief  Bit definition of TDES3 register
+  */
+#define ETH_DMATXDESC_B2AP  0xFFFFFFFFU  /*!< Buffer2 Address Pointer */
+
+/**
+  * @}
+  */
+/** @defgroup ETH_DMA_RX_Descriptor ETH DMA RX Descriptor
+  * @{
+  */
+
+/*
+  DMA Rx Descriptor
+  --------------------------------------------------------------------------------------------------------------------
+  RDES0 | OWN(31) |                                             Status [30:0]                                          |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES2 |                                       Buffer1 Address [31:0]                                                 |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES3 |                          Buffer2 Address [31:0] / Next Descriptor Address [31:0]                             |
+  ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/**
+  * @brief  Bit definition of RDES0 register: DMA Rx descriptor status register
+  */
+#define ETH_DMARXDESC_OWN         0x80000000U  /*!< OWN bit: descriptor is owned by DMA engine  */
+#define ETH_DMARXDESC_AFM         0x40000000U  /*!< DA Filter Fail for the rx frame  */
+#define ETH_DMARXDESC_FL          0x3FFF0000U  /*!< Receive descriptor frame length  */
+#define ETH_DMARXDESC_ES          0x00008000U  /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE          0x00004000U  /*!< Descriptor error: no more descriptors for receive frame  */
+#define ETH_DMARXDESC_SAF         0x00002000U  /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE          0x00001000U  /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE          0x00000800U  /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN        0x00000400U  /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS          0x00000200U  /*!< First descriptor of the frame  */
+#define ETH_DMARXDESC_LS          0x00000100U  /*!< Last descriptor of the frame  */
+#define ETH_DMARXDESC_IPV4HCE     0x00000080U  /*!< IPC Checksum Error: Rx Ipv4 header checksum error   */
+#define ETH_DMARXDESC_LC          0x00000040U  /*!< Late collision occurred during reception   */
+#define ETH_DMARXDESC_FT          0x00000020U  /*!< Frame type - Ethernet, otherwise 802.3    */
+#define ETH_DMARXDESC_RWT         0x00000010U  /*!< Receive Watchdog Timeout: watchdog timer expired during reception    */
+#define ETH_DMARXDESC_RE          0x00000008U  /*!< Receive error: error reported by MII interface  */
+#define ETH_DMARXDESC_DBE         0x00000004U  /*!< Dribble bit error: frame contains non int multiple of 8 bits  */
+#define ETH_DMARXDESC_CE          0x00000002U  /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE      0x00000001U  /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/**
+  * @brief  Bit definition of RDES1 register
+  */
+#define ETH_DMARXDESC_DIC   0x80000000U  /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2  0x1FFF0000U  /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER   0x00008000U  /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH   0x00004000U  /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1  0x00001FFFU  /*!< Receive Buffer1 Size */
+
+/**
+  * @brief  Bit definition of RDES2 register
+  */
+#define ETH_DMARXDESC_B1AP  0xFFFFFFFFU  /*!< Buffer1 Address Pointer */
+
+/**
+  * @brief  Bit definition of RDES3 register
+  */
+#define ETH_DMARXDESC_B2AP  0xFFFFFFFFU  /*!< Buffer2 Address Pointer */
+
+/**
+  * @}
+  */
+/** @defgroup ETH_AutoNegotiation ETH AutoNegotiation
+ * @{
+ */
+#define ETH_AUTONEGOTIATION_ENABLE     0x00000001U
+#define ETH_AUTONEGOTIATION_DISABLE    0x00000000U
+
+/**
+  * @}
+  */
+/** @defgroup ETH_Speed ETH Speed
+  * @{
+  */
+#define ETH_SPEED_10M        0x00000000U
+#define ETH_SPEED_100M       0x00004000U
+
+/**
+  * @}
+  */
+/** @defgroup ETH_Duplex_Mode ETH Duplex Mode
+  * @{
+  */
+#define ETH_MODE_FULLDUPLEX       0x00000800U
+#define ETH_MODE_HALFDUPLEX       0x00000000U
+/**
+  * @}
+  */
+/** @defgroup ETH_Rx_Mode ETH Rx Mode
+  * @{
+  */
+#define ETH_RXPOLLING_MODE      0x00000000U
+#define ETH_RXINTERRUPT_MODE    0x00000001U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Checksum_Mode ETH Checksum Mode
+  * @{
+  */
+#define ETH_CHECKSUM_BY_HARDWARE      0x00000000U
+#define ETH_CHECKSUM_BY_SOFTWARE      0x00000001U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Media_Interface ETH Media Interface
+  * @{
+  */
+#define ETH_MEDIA_INTERFACE_MII       0x00000000U
+#define ETH_MEDIA_INTERFACE_RMII      ((uint32_t)AFIO_MAPR_MII_RMII_SEL)
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Watchdog ETH Watchdog
+  * @{
+  */
+#define ETH_WATCHDOG_ENABLE       0x00000000U
+#define ETH_WATCHDOG_DISABLE      0x00800000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Jabber ETH Jabber
+  * @{
+  */
+#define ETH_JABBER_ENABLE    0x00000000U
+#define ETH_JABBER_DISABLE   0x00400000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Inter_Frame_Gap ETH Inter Frame Gap
+  * @{
+  */
+#define ETH_INTERFRAMEGAP_96BIT   0x00000000U  /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT   0x00020000U  /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT   0x00040000U  /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT   0x00060000U  /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT   0x00080000U  /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT   0x000A0000U  /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT   0x000C0000U  /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT   0x000E0000U  /*!< minimum IFG between frames during transmission is 40Bit */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Carrier_Sense ETH Carrier Sense
+  * @{
+  */
+#define ETH_CARRIERSENCE_ENABLE   0x00000000U
+#define ETH_CARRIERSENCE_DISABLE  0x00010000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Own ETH Receive Own
+  * @{
+  */
+#define ETH_RECEIVEOWN_ENABLE     0x00000000U
+#define ETH_RECEIVEOWN_DISABLE    0x00002000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Loop_Back_Mode ETH Loop Back Mode
+  * @{
+  */
+#define ETH_LOOPBACKMODE_ENABLE        0x00001000U
+#define ETH_LOOPBACKMODE_DISABLE       0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Checksum_Offload ETH Checksum Offload
+  * @{
+  */
+#define ETH_CHECKSUMOFFLAOD_ENABLE     0x00000400U
+#define ETH_CHECKSUMOFFLAOD_DISABLE    0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Retry_Transmission ETH Retry Transmission
+  * @{
+  */
+#define ETH_RETRYTRANSMISSION_ENABLE   0x00000000U
+#define ETH_RETRYTRANSMISSION_DISABLE  0x00000200U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip ETH Automatic Pad CRC Strip
+  * @{
+  */
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE     0x00000080U
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE    0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Back_Off_Limit ETH Back Off Limit
+  * @{
+  */
+#define ETH_BACKOFFLIMIT_10  0x00000000U
+#define ETH_BACKOFFLIMIT_8   0x00000020U
+#define ETH_BACKOFFLIMIT_4   0x00000040U
+#define ETH_BACKOFFLIMIT_1   0x00000060U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Deferral_Check ETH Deferral Check
+  * @{
+  */
+#define ETH_DEFFERRALCHECK_ENABLE       0x00000010U
+#define ETH_DEFFERRALCHECK_DISABLE      0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_All ETH Receive All
+  * @{
+  */
+#define ETH_RECEIVEALL_ENABLE     0x80000000U
+#define ETH_RECEIVEAll_DISABLE    0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Source_Addr_Filter ETH Source Addr Filter
+  * @{
+  */
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE       0x00000200U
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE      0x00000300U
+#define ETH_SOURCEADDRFILTER_DISABLE             0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Pass_Control_Frames ETH Pass Control Frames
+  * @{
+  */
+#define ETH_PASSCONTROLFRAMES_BLOCKALL                0x00000040U  /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL              0x00000080U  /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER 0x000000C0U  /*!< MAC forwards control frames that pass the Address Filter. */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Broadcast_Frames_Reception ETH Broadcast Frames Reception
+  * @{
+  */
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE     0x00000000U
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE    0x00000020U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Destination_Addr_Filter ETH Destination Addr Filter
+  * @{
+  */
+#define ETH_DESTINATIONADDRFILTER_NORMAL    0x00000000U
+#define ETH_DESTINATIONADDRFILTER_INVERSE   0x00000008U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Promiscuous_Mode ETH Promiscuous Mode
+  * @{
+  */
+#define ETH_PROMISCUOUS_MODE_ENABLE     0x00000001U
+#define ETH_PROMISCUOUS_MODE_DISABLE    0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Multicast_Frames_Filter ETH Multicast Frames Filter
+  * @{
+  */
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE    0x00000404U
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE           0x00000004U
+#define ETH_MULTICASTFRAMESFILTER_PERFECT             0x00000000U
+#define ETH_MULTICASTFRAMESFILTER_NONE                0x00000010U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Unicast_Frames_Filter ETH Unicast Frames Filter
+  * @{
+  */
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE 0x00000402U
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE        0x00000002U
+#define ETH_UNICASTFRAMESFILTER_PERFECT          0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Zero_Quanta_Pause ETH Zero Quanta Pause
+  * @{
+  */
+#define ETH_ZEROQUANTAPAUSE_ENABLE     0x00000000U
+#define ETH_ZEROQUANTAPAUSE_DISABLE    0x00000080U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Pause_Low_Threshold ETH Pause Low Threshold
+  * @{
+  */
+#define ETH_PAUSELOWTHRESHOLD_MINUS4        0x00000000U  /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28       0x00000010U  /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144      0x00000020U  /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256      0x00000030U  /*!< Pause time minus 256 slot times */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect ETH Unicast Pause Frame Detect
+  * @{
+  */
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE  0x00000008U
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE 0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Flow_Control ETH Receive Flow Control
+  * @{
+  */
+#define ETH_RECEIVEFLOWCONTROL_ENABLE       0x00000004U
+#define ETH_RECEIVEFLOWCONTROL_DISABLE      0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Flow_Control ETH Transmit Flow Control
+  * @{
+  */
+#define ETH_TRANSMITFLOWCONTROL_ENABLE      0x00000002U
+#define ETH_TRANSMITFLOWCONTROL_DISABLE     0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_VLAN_Tag_Comparison ETH VLAN Tag Comparison
+  * @{
+  */
+#define ETH_VLANTAGCOMPARISON_12BIT    0x00010000U
+#define ETH_VLANTAGCOMPARISON_16BIT    0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses ETH MAC addresses
+  * @{
+  */
+#define ETH_MAC_ADDRESS0     0x00000000U
+#define ETH_MAC_ADDRESS1     0x00000008U
+#define ETH_MAC_ADDRESS2     0x00000010U
+#define ETH_MAC_ADDRESS3     0x00000018U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA ETH MAC addresses filter SA DA
+  * @{
+  */
+#define ETH_MAC_ADDRESSFILTER_SA       0x00000000U
+#define ETH_MAC_ADDRESSFILTER_DA       0x00000008U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes ETH MAC addresses filter Mask bytes
+  * @{
+  */
+#define ETH_MAC_ADDRESSMASK_BYTE6      0x20000000U  /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5      0x10000000U  /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4      0x08000000U  /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3      0x04000000U  /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2      0x02000000U  /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1      0x01000000U  /*!< Mask MAC Address low reg bits [70] */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame ETH Drop TCP IP Checksum Error Frame
+  * @{
+  */
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE   0x00000000U
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE  0x04000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Store_Forward ETH Receive Store Forward
+  * @{
+  */
+#define ETH_RECEIVESTOREFORWARD_ENABLE      0x02000000U
+#define ETH_RECEIVESTOREFORWARD_DISABLE     0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Flush_Received_Frame ETH Flush Received Frame
+  * @{
+  */
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE       0x00000000U
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE      0x01000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Store_Forward ETH Transmit Store Forward
+  * @{
+  */
+#define ETH_TRANSMITSTOREFORWARD_ENABLE     0x00200000U
+#define ETH_TRANSMITSTOREFORWARD_DISABLE    0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Threshold_Control ETH Transmit Threshold Control
+  * @{
+  */
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES     0x00000000U  /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES    0x00004000U  /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES    0x00008000U  /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES    0x0000C000U  /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES     0x00010000U  /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES     0x00014000U  /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES     0x00018000U  /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES     0x0001C000U  /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Forward_Error_Frames ETH Forward Error Frames
+  * @{
+  */
+#define ETH_FORWARDERRORFRAMES_ENABLE       0x00000080U
+#define ETH_FORWARDERRORFRAMES_DISABLE      0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames ETH Forward Undersized Good Frames
+  * @{
+  */
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE   0x00000040U
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE  0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Threshold_Control ETH Receive Threshold Control
+  * @{
+  */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES      0x00000000U  /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES      0x00000008U  /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES      0x00000010U  /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES     0x00000018U  /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Second_Frame_Operate ETH Second Frame Operate
+  * @{
+  */
+#define ETH_SECONDFRAMEOPERARTE_ENABLE       0x00000004U
+#define ETH_SECONDFRAMEOPERARTE_DISABLE      0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Address_Aligned_Beats ETH Address Aligned Beats
+  * @{
+  */
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE      0x02000000U
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE     0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Fixed_Burst ETH Fixed Burst
+  * @{
+  */
+#define ETH_FIXEDBURST_ENABLE     0x00010000U
+#define ETH_FIXEDBURST_DISABLE    0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length ETH Rx DMA Burst Length
+  * @{
+  */
+#define ETH_RXDMABURSTLENGTH_1BEAT          0x00020000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT          0x00040000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT          0x00080000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT          0x00100000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT         0x00200000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT         0x00400000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT    0x01020000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT    0x01040000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT   0x01080000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT   0x01100000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT   0x01200000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT  0x01400000U  /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length ETH Tx DMA Burst Length
+  * @{
+  */
+#define ETH_TXDMABURSTLENGTH_1BEAT          0x00000100U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT          0x00000200U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT          0x00000400U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT          0x00000800U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT         0x00001000U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT         0x00002000U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT    0x01000100U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT    0x01000200U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT   0x01000400U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT   0x01000800U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT   0x01001000U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT  0x01002000U  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Arbitration ETH DMA Arbitration
+  * @{
+  */
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1   0x00000000U
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1   0x00004000U
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1   0x00008000U
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1   0x0000C000U
+#define ETH_DMAARBITRATION_RXPRIORTX             0x00000002U
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment ETH DMA Tx descriptor segment
+  * @{
+  */
+#define ETH_DMATXDESC_LASTSEGMENTS      0x40000000U  /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT      0x20000000U  /*!< First Segment */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control ETH DMA Tx descriptor Checksum Insertion Control
+  * @{
+  */
+#define ETH_DMATXDESC_CHECKSUMBYPASS             0x00000000U   /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER         0x00400000U   /*!< IPv4 header checksum insertion  */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT  0x00800000U   /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL     0x00C00000U   /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers ETH DMA Rx descriptor buffers
+  * @{
+  */
+#define ETH_DMARXDESC_BUFFER1     0x00000000U  /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2     0x00000001U  /*!< DMA Rx Desc Buffer2 */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_PMT_Flags ETH PMT Flags
+  * @{
+  */
+#define ETH_PMT_FLAG_WUFFRPR      0x80000000U  /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR         0x00000040U  /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR          0x00000020U  /*!< Magic Packet Received */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MMC_Tx_Interrupts ETH MMC Tx Interrupts
+  * @{
+  */
+#define ETH_MMC_IT_TGF       0x00200000U  /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC    0x00008000U  /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC     0x00004000U  /*!< When Tx good single col counter reaches half the maximum value */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MMC_Rx_Interrupts ETH MMC Rx Interrupts
+  * @{
+  */
+#define ETH_MMC_IT_RGUF      0x10020000U  /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE      0x10000040U  /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE      0x10000020U  /*!< When Rx crc error counter reaches half the maximum value */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_Flags ETH MAC Flags
+  * @{
+  */
+#define ETH_MAC_FLAG_TST     0x00000200U  /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT    0x00000040U  /*!< MMC transmit flag  */
+#define ETH_MAC_FLAG_MMCR    0x00000020U  /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC     0x00000010U  /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT     0x00000008U  /*!< PMT flag (on MAC) */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Flags ETH DMA Flags
+  * @{
+  */
+#define ETH_DMA_FLAG_TST               0x20000000U  /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT               0x10000000U  /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC               0x08000000U  /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR 0x00800000U  /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR    0x01000000U  /*!< Error bits 0-write transfer, 1-read transfer */
+#define ETH_DMA_FLAG_ACCESSERROR       0x02000000U  /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS               0x00010000U  /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS               0x00008000U  /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER                0x00004000U  /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE               0x00002000U  /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET                0x00000400U  /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT               0x00000200U  /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS               0x00000100U  /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU               0x00000080U  /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R                 0x00000040U  /*!< Receive flag */
+#define ETH_DMA_FLAG_TU                0x00000020U  /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO                0x00000010U  /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT               0x00000008U  /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU               0x00000004U  /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS               0x00000002U  /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T                 0x00000001U  /*!< Transmit flag */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_Interrupts ETH MAC Interrupts
+  * @{
+  */
+#define ETH_MAC_IT_TST       0x00000200U  /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT      0x00000040U  /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR      0x00000020U  /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC       0x00000010U  /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT       0x00000008U  /*!< PMT interrupt (on MAC) */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Interrupts ETH DMA Interrupts
+  * @{
+  */
+#define ETH_DMA_IT_TST       0x20000000U  /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT       0x10000000U  /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC       0x08000000U  /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS       0x00010000U  /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS       0x00008000U  /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER        0x00004000U  /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE       0x00002000U  /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET        0x00000400U  /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT       0x00000200U  /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS       0x00000100U  /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU       0x00000080U  /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R         0x00000040U  /*!< Receive interrupt */
+#define ETH_DMA_IT_TU        0x00000020U  /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO        0x00000010U  /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT       0x00000008U  /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU       0x00000004U  /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS       0x00000002U  /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T         0x00000001U  /*!< Transmit interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_transmit_process_state ETH DMA transmit process state
+  * @{
+  */
+#define ETH_DMA_TRANSMITPROCESS_STOPPED     0x00000000U  /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING    0x00100000U  /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING     0x00200000U  /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING     0x00300000U  /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED   0x00600000U  /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING     0x00700000U  /*!< Running - closing Rx descriptor */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup ETH_DMA_receive_process_state ETH DMA receive process state
+  * @{
+  */
+#define ETH_DMA_RECEIVEPROCESS_STOPPED      0x00000000U  /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING     0x00020000U  /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING      0x00060000U  /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED    0x00080000U  /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING      0x000A0000U  /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING      0x000E0000U  /*!< Running - queuing the receive frame into host memory */
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_overflow ETH DMA overflow
+  * @{
+  */
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER      0x10000000U  /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER 0x00010000U  /*!< Overflow bit for missed frame counter */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP ETH EXTI LINE WAKEUP
+  * @{
+  */
+#define ETH_EXTI_LINE_WAKEUP              0x00080000U  /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Macros ETH Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/** @brief Reset ETH handle state
+  * @param  __HANDLE__: specifies the ETH handle.
+  * @retval None
+  */
+#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1)
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__)  do{                                                 \
+                                                       (__HANDLE__)->State = HAL_ETH_STATE_RESET;     \
+                                                       (__HANDLE__)->MspInitCallback = NULL;          \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;        \
+                                                     } while(0)
+#else
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+#endif /*USE_HAL_ETH_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA Tx Desc flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag of TDES0 to check.
+  * @retval the ETH_DMATxDescFlag (SET or RESET).
+  */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__)             ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA Rx Desc flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag of RDES0 to check.
+  * @retval the ETH_DMATxDescFlag (SET or RESET).
+  */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__)             ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+  * @brief  Enables the specified DMA Rx Desc receive interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__)                          ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+  * @brief  Disables the specified DMA Rx Desc receive interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__)                         ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+  * @brief  Set the specified DMA Rx Desc Own bit.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__)                           ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+  * @brief  Returns the specified ETHERNET DMA Tx Desc collision count.
+  * @param  __HANDLE__: ETH Handle
+  * @retval The Transmit descriptor collision counter value.
+  */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__)                   (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+  * @brief  Set the specified DMA Tx Desc Own bit.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__)                       ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+  * @brief  Enables the specified DMA Tx Desc Transmit interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+  * @brief  Disables the specified DMA Tx Desc Transmit interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+  * @brief  Selects the specified ETHERNET DMA Tx Desc Checksum Insertion.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __CHECKSUM__: specifies is the DMA Tx desc checksum insertion.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+  *     @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+  *     @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+  *     @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__)     ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+  * @brief  Enables the DMA Tx Desc CRC.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+  * @brief  Disables the DMA Tx Desc CRC.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__)                         ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+  * @brief  Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__)            ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+  * @brief  Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__)           ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/**
+ * @brief  Enables the specified ETHERNET MAC interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+  *   enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+  *     @arg ETH_MAC_IT_PMT : PMT interrupt
+  * @retval None
+  */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__)                 ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET MAC interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+  *   enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+  *     @arg ETH_MAC_IT_PMT : PMT interrupt
+  * @retval None
+  */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__)                ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Initiate a Pause Control Frame (Full-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__)              ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Checks whether the ETHERNET flow control busy bit is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @retval The new state of flow control busy status bit (SET or RESET).
+  */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__)               (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Enables the MAC Back Pressure operation activation (Half-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__)          ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Disables the MAC BackPressure operation activation (Half-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__)         ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Checks whether the specified ETHERNET MAC flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MAC_FLAG_TST  : Time stamp trigger flag
+  *     @arg ETH_MAC_FLAG_MMCT : MMC transmit flag
+  *     @arg ETH_MAC_FLAG_MMCR : MMC receive flag
+  *     @arg ETH_MAC_FLAG_MMC  : MMC flag
+  *     @arg ETH_MAC_FLAG_PMT  : PMT flag
+  * @retval The state of ETHERNET MAC flag.
+  */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__)                   (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+  * @brief  Enables the specified ETHERNET DMA interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+  *   enabled @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)                 ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET DMA interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+  *   disabled. @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)                ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Clears the ETHERNET DMA IT pending bit.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA flag is set or not.
+* @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to check. @ref ETH_DMA_Flags
+  * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+  */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__)                   (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to clear. @ref ETH_DMA_Flags
+  * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+  */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__)                 ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA overflow flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __OVERFLOW__: specifies the DMA overflow flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+  *     @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+  * @retval The state of ETHERNET DMA overflow Flag (SET or RESET).
+  */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__)       (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+  * @brief  Set the DMA Receive status watchdog timer register value
+  * @param  __HANDLE__: ETH Handle
+  * @param  __VALUE__: DMA Receive status watchdog timer register value
+  * @retval None
+  */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__)       ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/**
+  * @brief  Enables any unicast packet filtered by the MAC address
+  *   recognition to be a wake-up frame.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__)               ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+  * @brief  Disables any unicast packet filtered by the MAC address
+  *   recognition to be a wake-up frame.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+  * @brief  Enables the MAC Wake-Up Frame Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Disables the MAC Wake-Up Frame Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__)             ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Enables the MAC Magic Packet Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+  * @brief  Disables the MAC Magic Packet Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__)             ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Enables the MAC Power Down.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+  * @brief  Disables the MAC Power Down.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+  * @brief  Checks whether the specified ETHERNET PMT flag is set or not.
+  * @param  __HANDLE__: ETH Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset
+  *     @arg ETH_PMT_FLAG_WUFR    : Wake-Up Frame Received
+  *     @arg ETH_PMT_FLAG_MPR     : Magic Packet Received
+  * @retval The new state of ETHERNET PMT Flag (SET or RESET).
+  */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__)               (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+  * @brief  Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+  * @param   __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__)                     ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+  * @brief  Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__)                     do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+                                                                          (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while(0U)
+
+/**
+  * @brief  Enables the MMC Counter Freeze.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__)                  ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+  * @brief  Disables the MMC Counter Freeze.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__)                 ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+  * @brief  Enables the MMC Reset On Read.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__)                ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+  * @brief  Disables the MMC Reset On Read.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__)               ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+  * @brief  Enables the MMC Counter Stop Rollover.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__)            ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+  * @brief  Disables the MMC Counter Stop Rollover.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__)           ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+  * @brief  Resets the MMC Counters.
+  * @param   __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__)                         ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+  * @brief  Enables the specified ETHERNET MMC Rx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MMC_IT_RGUF  : When Rx good unicast frames counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_RFAE  : When Rx alignment error counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_RFCE  : When Rx crc error counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__)               (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFFU)
+/**
+  * @brief  Disables the specified ETHERNET MMC Rx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MMC_IT_RGUF  : When Rx good unicast frames counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_RFAE  : When Rx alignment error counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_RFCE  : When Rx crc error counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__)              (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFFU)
+/**
+  * @brief  Enables the specified ETHERNET MMC Tx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MMC_IT_TGF   : When Tx good frame counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__)            ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET MMC Tx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MMC_IT_TGF   : When Tx good frame counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__)           ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/**
+  * @brief  Enables the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Disables the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief Enable event on ETH External event line.
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_EVENT()  EXTI->EMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief Disable event on ETH External event line
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_EVENT() EXTI->EMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Get flag of the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Clear flag of the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Enables rising edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER()  EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+  * @brief  Disables the rising edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER()  EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Enables falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER()  EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Disables falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER()  EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Enables rising/falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER()  do{EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+                                                                 EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP;\
+                                                                }while(0U)
+
+/**
+  * @brief  Disables rising/falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER() do{EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+                                                                 EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+                                                                }while(0U)
+
+/**
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT()                  EXTI->SWIER|= ETH_EXTI_LINE_WAKEUP
+
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup ETH_Exported_Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+
+/** @addtogroup ETH_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, pETH_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+/* IO operation functions  ****************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+/* Communication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+/* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group3
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group4
+  * @{
+  */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* ETH */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_ETH_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h

@@ -0,0 +1,320 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_exti.h
+  * @author  MCD Application Team
+  * @brief   Header file of EXTI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_EXTI_H
+#define STM32F1xx_HAL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup EXTI EXTI
+  * @brief EXTI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup EXTI_Exported_Types EXTI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL EXTI common Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_EXTI_COMMON_CB_ID          = 0x00U
+} EXTI_CallbackIDTypeDef;
+
+/**
+  * @brief  EXTI Handle structure definition
+  */
+typedef struct
+{
+  uint32_t Line;                    /*!<  Exti line number */
+  void (* PendingCallback)(void);   /*!<  Exti pending callback */
+} EXTI_HandleTypeDef;
+
+/**
+  * @brief  EXTI Configuration structure definition
+  */
+typedef struct
+{
+  uint32_t Line;      /*!< The Exti line to be configured. This parameter
+                           can be a value of @ref EXTI_Line */
+  uint32_t Mode;      /*!< The Exit Mode to be configured for a core.
+                           This parameter can be a combination of @ref EXTI_Mode */
+  uint32_t Trigger;   /*!< The Exti Trigger to be configured. This parameter
+                           can be a value of @ref EXTI_Trigger */
+  uint32_t GPIOSel;   /*!< The Exti GPIO multiplexer selection to be configured.
+                           This parameter is only possible for line 0 to 15. It
+                           can be a value of @ref EXTI_GPIOSel */
+} EXTI_ConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
+  * @{
+  */
+
+/** @defgroup EXTI_Line  EXTI Line
+  * @{
+  */
+#define EXTI_LINE_0                        (EXTI_GPIO     | 0x00u)    /*!< External interrupt line 0 */
+#define EXTI_LINE_1                        (EXTI_GPIO     | 0x01u)    /*!< External interrupt line 1 */
+#define EXTI_LINE_2                        (EXTI_GPIO     | 0x02u)    /*!< External interrupt line 2 */
+#define EXTI_LINE_3                        (EXTI_GPIO     | 0x03u)    /*!< External interrupt line 3 */
+#define EXTI_LINE_4                        (EXTI_GPIO     | 0x04u)    /*!< External interrupt line 4 */
+#define EXTI_LINE_5                        (EXTI_GPIO     | 0x05u)    /*!< External interrupt line 5 */
+#define EXTI_LINE_6                        (EXTI_GPIO     | 0x06u)    /*!< External interrupt line 6 */
+#define EXTI_LINE_7                        (EXTI_GPIO     | 0x07u)    /*!< External interrupt line 7 */
+#define EXTI_LINE_8                        (EXTI_GPIO     | 0x08u)    /*!< External interrupt line 8 */
+#define EXTI_LINE_9                        (EXTI_GPIO     | 0x09u)    /*!< External interrupt line 9 */
+#define EXTI_LINE_10                       (EXTI_GPIO     | 0x0Au)    /*!< External interrupt line 10 */
+#define EXTI_LINE_11                       (EXTI_GPIO     | 0x0Bu)    /*!< External interrupt line 11 */
+#define EXTI_LINE_12                       (EXTI_GPIO     | 0x0Cu)    /*!< External interrupt line 12 */
+#define EXTI_LINE_13                       (EXTI_GPIO     | 0x0Du)    /*!< External interrupt line 13 */
+#define EXTI_LINE_14                       (EXTI_GPIO     | 0x0Eu)    /*!< External interrupt line 14 */
+#define EXTI_LINE_15                       (EXTI_GPIO     | 0x0Fu)    /*!< External interrupt line 15 */
+#define EXTI_LINE_16                       (EXTI_CONFIG   | 0x10u)    /*!< External interrupt line 16 Connected to the PVD Output */
+#define EXTI_LINE_17                       (EXTI_CONFIG   | 0x11u)    /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#if defined(EXTI_IMR_IM18)
+#define EXTI_LINE_18                       (EXTI_CONFIG   | 0x12u)    /*!< External interrupt line 18 Connected to the USB Wakeup from suspend event */
+#endif /* EXTI_IMR_IM18 */
+#if defined(EXTI_IMR_IM19)
+#define EXTI_LINE_19                       (EXTI_CONFIG   | 0x13u)    /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+#endif /* EXTI_IMR_IM19 */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Mode  EXTI Mode
+  * @{
+  */
+#define EXTI_MODE_NONE                      0x00000000u
+#define EXTI_MODE_INTERRUPT                 0x00000001u
+#define EXTI_MODE_EVENT                     0x00000002u
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Trigger  EXTI Trigger
+  * @{
+  */
+#define EXTI_TRIGGER_NONE                   0x00000000u
+#define EXTI_TRIGGER_RISING                 0x00000001u
+#define EXTI_TRIGGER_FALLING                0x00000002u
+#define EXTI_TRIGGER_RISING_FALLING         (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_GPIOSel  EXTI GPIOSel
+  * @brief
+  * @{
+  */
+#define EXTI_GPIOA                          0x00000000u
+#define EXTI_GPIOB                          0x00000001u
+#define EXTI_GPIOC                          0x00000002u
+#define EXTI_GPIOD                          0x00000003u
+#if defined (GPIOE)
+#define EXTI_GPIOE                          0x00000004u
+#endif /* GPIOE */
+#if defined (GPIOF)
+#define EXTI_GPIOF                          0x00000005u
+#endif /* GPIOF */
+#if defined (GPIOG)
+#define EXTI_GPIOG                          0x00000006u
+#endif /* GPIOG */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants --------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+/**
+  * @brief  EXTI Line property definition
+  */
+#define EXTI_PROPERTY_SHIFT                 24u
+#define EXTI_CONFIG                         (0x02uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_GPIO                           ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
+#define EXTI_PROPERTY_MASK                  (EXTI_CONFIG | EXTI_GPIO)
+
+/**
+  * @brief  EXTI bit usage
+  */
+#define EXTI_PIN_MASK                       0x0000001Fu
+
+/**
+  * @brief  EXTI Mask for interrupt & event mode
+  */
+#define EXTI_MODE_MASK                      (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
+
+/**
+  * @brief  EXTI Mask for trigger possibilities
+  */
+#define EXTI_TRIGGER_MASK                   (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+
+/**
+  * @brief  EXTI Line number
+  */
+#if defined(EXTI_IMR_IM19)
+#define EXTI_LINE_NB                        20UL
+#elif defined(EXTI_IMR_IM18)
+#define EXTI_LINE_NB                        19UL
+#else /* EXTI_IMR_IM17 */
+#define EXTI_LINE_NB                        18UL
+#endif /* EXTI_IMR_IM19 */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Macros EXTI Private Macros
+  * @{
+  */
+#define IS_EXTI_LINE(__EXTI_LINE__)          ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
+                                             ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG)   || \
+                                              (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO))    && \
+                                              (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
+
+#define IS_EXTI_MODE(__EXTI_LINE__)          ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
+                                              (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
+
+#define IS_EXTI_TRIGGER(__EXTI_LINE__)       (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
+
+#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__)  ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
+
+#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__)   (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
+
+#if defined (GPIOG)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE) || \
+                                         ((__PORT__) == EXTI_GPIOF) || \
+                                         ((__PORT__) == EXTI_GPIOG))
+#elif defined (GPIOF)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE) || \
+                                         ((__PORT__) == EXTI_GPIOF))
+#elif defined (GPIOE)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE))
+#else
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD))
+#endif /* GPIOG */
+
+#define IS_EXTI_GPIO_PIN(__PIN__)       ((__PIN__) < 16u)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
+  * @brief    EXTI Exported Functions
+  * @{
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
+  * @brief    Configuration functions
+  * @{
+  */
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
+  * @brief    IO operation functions
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void              HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
+uint32_t          HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h

@@ -0,0 +1,328 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_flash.h
+  * @author  MCD Application Team
+  * @brief   Header file of Flash HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_FLASH_H
+#define __STM32F1xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+   
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */
+  
+/** @addtogroup FLASH_Private_Constants
+  * @{
+  */
+#define FLASH_TIMEOUT_VALUE              50000U /* 50 s */
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Private_Macros
+  * @{
+  */
+
+#define IS_FLASH_TYPEPROGRAM(VALUE)  (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+                                      ((VALUE) == FLASH_TYPEPROGRAM_WORD)     || \
+                                      ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))  
+
+#if   defined(FLASH_ACR_LATENCY)
+#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
+                                       ((__LATENCY__) == FLASH_LATENCY_1) || \
+                                       ((__LATENCY__) == FLASH_LATENCY_2))
+
+#else
+#define IS_FLASH_LATENCY(__LATENCY__)   ((__LATENCY__) == FLASH_LATENCY_0)
+#endif /* FLASH_ACR_LATENCY */
+/**
+  * @}
+  */  
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */  
+
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum 
+{
+  FLASH_PROC_NONE              = 0U, 
+  FLASH_PROC_PAGEERASE         = 1U,
+  FLASH_PROC_MASSERASE         = 2U,
+  FLASH_PROC_PROGRAMHALFWORD   = 3U,
+  FLASH_PROC_PROGRAMWORD       = 4U,
+  FLASH_PROC_PROGRAMDOUBLEWORD = 5U
+} FLASH_ProcedureTypeDef;
+
+/** 
+  * @brief  FLASH handle Structure definition  
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+  
+  __IO uint32_t               DataRemaining;    /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+  __IO uint32_t               Address;          /*!< Internal variable to save address selected for program or erase */
+
+  __IO uint64_t               Data;             /*!< Internal variable to save data to be programmed */
+
+  HAL_LockTypeDef             Lock;             /*!< FLASH locking object                */
+
+  __IO uint32_t               ErrorCode;        /*!< FLASH error code                    
+                                                     This parameter can be a value of @ref FLASH_Error_Codes  */
+} FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */  
+
+/** @defgroup FLASH_Error_Codes FLASH Error Codes
+  * @{
+  */
+
+#define HAL_FLASH_ERROR_NONE      0x00U  /*!< No error */
+#define HAL_FLASH_ERROR_PROG      0x01U  /*!< Programming error */
+#define HAL_FLASH_ERROR_WRP       0x02U  /*!< Write protection error */
+#define HAL_FLASH_ERROR_OPTV      0x04U  /*!< Option validity error */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */ 
+#define FLASH_TYPEPROGRAM_HALFWORD             0x01U  /*!<Program a half-word (16-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_WORD                 0x02U  /*!<Program a word (32-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_DOUBLEWORD           0x03U  /*!<Program a double word (64-bit) at a specified address*/
+
+/**
+  * @}
+  */
+
+#if   defined(FLASH_ACR_LATENCY)
+/** @defgroup FLASH_Latency FLASH Latency
+  * @{
+  */
+#define FLASH_LATENCY_0            0x00000000U               /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1            FLASH_ACR_LATENCY_0       /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2            FLASH_ACR_LATENCY_1       /*!< FLASH Two Latency cycles */
+
+/**
+  * @}
+  */
+
+#else
+/** @defgroup FLASH_Latency FLASH Latency
+  * @{
+  */
+#define FLASH_LATENCY_0            0x00000000U    /*!< FLASH Zero Latency cycle */
+
+/**
+  * @}
+  */
+
+#endif /* FLASH_ACR_LATENCY */
+/**
+  * @}
+  */  
+  
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ *  @brief macros to control FLASH features 
+ *  @{
+ */
+ 
+/** @defgroup FLASH_Half_Cycle FLASH Half Cycle
+ *  @brief macros to handle FLASH half cycle
+ * @{
+ */
+
+/**
+  * @brief  Enable the FLASH half cycle access.
+  * @note   half cycle access can only be used with a low-frequency clock of less than
+            8 MHz that can be obtained with the use of HSI or HSE but not of PLL.
+  * @retval None
+  */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE()  (FLASH->ACR |= FLASH_ACR_HLFCYA)
+
+/**
+  * @brief  Disable the FLASH half cycle access.
+  * @note   half cycle access can only be used with a low-frequency clock of less than
+            8 MHz that can be obtained with the use of HSI or HSE but not of PLL.
+  * @retval None
+  */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
+
+/**
+  * @}
+  */
+
+#if defined(FLASH_ACR_LATENCY)
+/** @defgroup FLASH_EM_Latency FLASH Latency
+ *  @brief macros to handle FLASH Latency
+ * @{
+ */ 
+  
+/**
+  * @brief  Set the FLASH Latency.
+  * @param  __LATENCY__ FLASH Latency                   
+  *         The value of this parameter depend on device used within the same series
+  * @retval None
+  */ 
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__)    (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+
+/**
+  * @brief  Get the FLASH Latency.
+  * @retval FLASH Latency                   
+  *         The value of this parameter depend on device used within the same series
+  */ 
+#define __HAL_FLASH_GET_LATENCY()     (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+  * @}
+  */
+
+#endif /* FLASH_ACR_LATENCY */
+/** @defgroup FLASH_Prefetch FLASH Prefetch
+ *  @brief macros to handle FLASH Prefetch buffer
+ * @{
+ */   
+/**
+  * @brief  Enable the FLASH prefetch buffer.
+  * @retval None
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()    (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+  * @brief  Disable the FLASH prefetch buffer.
+  * @retval None
+  */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/* Include FLASH HAL Extended module */
+#include "stm32f1xx_hal_flash_ex.h"  
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+  * @{
+  */
+  
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler function */
+void       HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */ 
+void       HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void       HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+void HAL_FLASH_OB_Launch(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_FLASH_GetError(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef       FLASH_WaitForLastOperation(uint32_t Timeout);
+#if defined(FLASH_BANK2_END)
+HAL_StatusTypeDef       FLASH_WaitForLastOperationBank2(uint32_t Timeout);
+#endif /* FLASH_BANK2_END */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h

@@ -0,0 +1,786 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_flash_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of Flash HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_FLASH_EX_H
+#define __STM32F1xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASHEx
+  * @{
+  */ 
+
+/** @addtogroup FLASHEx_Private_Constants
+  * @{
+  */
+
+#define FLASH_SIZE_DATA_REGISTER     0x1FFFF7E0U
+#define OBR_REG_INDEX                1U
+#define SR_FLAG_MASK                 ((uint32_t)(FLASH_SR_BSY | FLASH_SR_PGERR | FLASH_SR_WRPRTERR | FLASH_SR_EOP))
+
+/**
+  * @}
+  */  
+
+/** @addtogroup FLASHEx_Private_Macros
+  * @{
+  */
+
+#define IS_FLASH_TYPEERASE(VALUE)   (((VALUE) == FLASH_TYPEERASE_PAGES) || ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_OPTIONBYTE(VALUE)        (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
+
+#define IS_WRPSTATE(VALUE)          (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#define IS_OB_RDP_LEVEL(LEVEL)      (((LEVEL) == OB_RDP_LEVEL_0) || ((LEVEL) == OB_RDP_LEVEL_1))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) 
+
+#define IS_OB_IWDG_SOURCE(SOURCE)   (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE)   (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE)  (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#if defined(FLASH_BANK2_END)
+#define IS_OB_BOOT1(BOOT1)         (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+#endif /* FLASH_BANK2_END */
+
+/* Low Density */
+#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6))
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08007FFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08003FFFU))
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+
+/* Medium Density */
+#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \
+                                           (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU) : \
+                                           (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFFU))))
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
+
+/* High Density */
+#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE))
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFFU) : \
+                                           (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0805FFFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU)))
+#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
+
+/* XL Density */
+#if defined(FLASH_BANK2_END)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080FFFFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080BFFFFU))
+#endif /* FLASH_BANK2_END */
+
+/* Connectivity Line */
+#if (defined(STM32F105xC) || defined(STM32F107xC))
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU) : \
+                                           (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) ==  0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU)))
+#endif /* STM32F105xC || STM32F107xC */
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U))
+
+#if defined(FLASH_BANK2_END)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1)  || \
+                             ((BANK) == FLASH_BANK_2)  || \
+                             ((BANK) == FLASH_BANK_BOTH))
+#else
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
+#endif /* FLASH_BANK2_END */
+
+/* Low Density */
+#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS)  (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
+                                            ((ADDRESS) <= FLASH_BANK1_END) :  ((ADDRESS) <= 0x08003FFFU)))
+
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+
+/* Medium Density */
+#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
+                                           ((ADDRESS) <= FLASH_BANK1_END) :  (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \
+                                           ((ADDRESS) <= 0x0800FFFF) :  (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
+                                           ((ADDRESS) <= 0x08007FFF) :  ((ADDRESS) <= 0x08003FFFU)))))
+
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
+
+/* High Density */
+#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? \
+                                           ((ADDRESS) <= FLASH_BANK1_END) :  (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? \
+                                           ((ADDRESS) <= 0x0805FFFFU) :  ((ADDRESS) <= 0x0803FFFFU))))
+
+#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
+
+/* XL Density */
+#if defined(FLASH_BANK2_END)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? \
+                                           ((ADDRESS) <= FLASH_BANK2_END) :  ((ADDRESS) <= 0x080BFFFFU)))
+
+#endif /* FLASH_BANK2_END */
+
+/* Connectivity Line */
+#if (defined(STM32F105xC) || defined(STM32F107xC))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \
+                                           ((ADDRESS) <= FLASH_BANK1_END) :  (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
+                                           ((ADDRESS) <= 0x0801FFFFU) :  ((ADDRESS) <= 0x0800FFFFU))))
+
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+  * @}
+  */  
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
+  * @{
+  */  
+
+/**
+  * @brief  FLASH Erase structure definition
+  */
+typedef struct
+{
+  uint32_t TypeErase;   /*!< TypeErase: Mass erase or page erase.
+                             This parameter can be a value of @ref FLASHEx_Type_Erase */
+  
+  uint32_t Banks;       /*!< Select banks to erase when Mass erase is enabled.
+                             This parameter must be a value of @ref FLASHEx_Banks */    
+  
+  uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+                             This parameter must be a number between Min_Data = 0x08000000 and Max_Data = FLASH_BANKx_END 
+                             (x = 1 or 2 depending on devices)*/
+  
+  uint32_t NbPages;     /*!< NbPages: Number of pagess to be erased.
+                             This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
+                                                          
+} FLASH_EraseInitTypeDef;
+
+/**
+  * @brief  FLASH Options bytes program structure definition
+  */
+typedef struct
+{
+  uint32_t OptionType;  /*!< OptionType: Option byte to be configured.
+                             This parameter can be a value of @ref FLASHEx_OB_Type */
+
+  uint32_t WRPState;    /*!< WRPState: Write protection activation or deactivation.
+                             This parameter can be a value of @ref FLASHEx_OB_WRP_State */
+
+  uint32_t WRPPage;     /*!< WRPPage: specifies the page(s) to be write protected
+                             This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+  uint32_t Banks;        /*!< Select banks for WRP activation/deactivation of all sectors.
+                              This parameter must be a value of @ref FLASHEx_Banks */ 
+    
+  uint8_t RDPLevel;     /*!< RDPLevel: Set the read protection level..
+                             This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
+
+#if defined(FLASH_BANK2_END)
+  uint8_t USERConfig;   /*!< USERConfig: Program the FLASH User Option Byte: 
+                             IWDG / STOP / STDBY / BOOT1
+                             This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, 
+                             @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1 */
+#else
+  uint8_t USERConfig;   /*!< USERConfig: Program the FLASH User Option Byte: 
+                             IWDG / STOP / STDBY
+                             This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, 
+                             @ref FLASHEx_OB_nRST_STDBY */
+#endif /* FLASH_BANK2_END */
+
+  uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
+                             This parameter can be a value of @ref FLASHEx_OB_Data_Address */
+  
+  uint8_t DATAData;     /*!< DATAData: Data to be stored in the option byte DATA
+                             This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+} FLASH_OBProgramInitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
+  * @{
+  */  
+
+/** @defgroup FLASHEx_Constants FLASH Constants
+  * @{
+  */ 
+
+/** @defgroup FLASHEx_Page_Size Page Size
+  * @{
+  */ 
+#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
+#define FLASH_PAGE_SIZE          0x400U
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+       /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+
+#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC))
+#define FLASH_PAGE_SIZE          0x800U
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+       /* STM32F101xG || STM32F103xG */ 
+       /* STM32F105xC || STM32F107xC */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Type_Erase Type Erase
+  * @{
+  */ 
+#define FLASH_TYPEERASE_PAGES     0x00U  /*!<Pages erase only*/
+#define FLASH_TYPEERASE_MASSERASE 0x02U  /*!<Flash mass erase activation*/
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Banks Banks
+  * @{
+  */
+#if defined(FLASH_BANK2_END)
+#define FLASH_BANK_1     1U /*!< Bank 1   */
+#define FLASH_BANK_2     2U /*!< Bank 2   */
+#define FLASH_BANK_BOTH  ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2  */
+
+#else
+#define FLASH_BANK_1     1U /*!< Bank 1   */
+#endif
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OptionByte_Constants Option Byte Constants
+  * @{
+  */ 
+
+/** @defgroup FLASHEx_OB_Type Option Bytes Type
+  * @{
+  */
+#define OPTIONBYTE_WRP            0x01U  /*!<WRP option byte configuration*/
+#define OPTIONBYTE_RDP            0x02U  /*!<RDP option byte configuration*/
+#define OPTIONBYTE_USER           0x04U  /*!<USER option byte configuration*/
+#define OPTIONBYTE_DATA           0x08U  /*!<DATA option byte configuration*/
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OB_WRP_State Option Byte WRP State
+  * @{
+  */ 
+#define OB_WRPSTATE_DISABLE       0x00U  /*!<Disable the write protection of the desired pages*/
+#define OB_WRPSTATE_ENABLE        0x01U  /*!<Enable the write protection of the desired pagess*/
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OB_Write_Protection Option Bytes Write Protection
+  * @{
+  */
+/* STM32 Low and Medium density devices */
+#if  defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) \
+  || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) \
+  || defined(STM32F103xB)
+#define OB_WRP_PAGES0TO3               0x00000001U /*!< Write protection of page 0 to 3 */
+#define OB_WRP_PAGES4TO7               0x00000002U /*!< Write protection of page 4 to 7 */
+#define OB_WRP_PAGES8TO11              0x00000004U /*!< Write protection of page 8 to 11 */
+#define OB_WRP_PAGES12TO15             0x00000008U /*!< Write protection of page 12 to 15 */
+#define OB_WRP_PAGES16TO19             0x00000010U /*!< Write protection of page 16 to 19 */
+#define OB_WRP_PAGES20TO23             0x00000020U /*!< Write protection of page 20 to 23 */
+#define OB_WRP_PAGES24TO27             0x00000040U /*!< Write protection of page 24 to 27 */
+#define OB_WRP_PAGES28TO31             0x00000080U /*!< Write protection of page 28 to 31 */
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+       /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+       
+/* STM32 Medium-density devices */
+#if  defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)
+#define OB_WRP_PAGES32TO35             0x00000100U   /*!< Write protection of page 32 to 35 */
+#define OB_WRP_PAGES36TO39             0x00000200U   /*!< Write protection of page 36 to 39 */
+#define OB_WRP_PAGES40TO43             0x00000400U   /*!< Write protection of page 40 to 43 */
+#define OB_WRP_PAGES44TO47             0x00000800U   /*!< Write protection of page 44 to 47 */
+#define OB_WRP_PAGES48TO51             0x00001000U   /*!< Write protection of page 48 to 51 */
+#define OB_WRP_PAGES52TO55             0x00002000U   /*!< Write protection of page 52 to 55 */
+#define OB_WRP_PAGES56TO59             0x00004000U   /*!< Write protection of page 56 to 59 */
+#define OB_WRP_PAGES60TO63             0x00008000U   /*!< Write protection of page 60 to 63 */
+#define OB_WRP_PAGES64TO67             0x00010000U   /*!< Write protection of page 64 to 67 */
+#define OB_WRP_PAGES68TO71             0x00020000U   /*!< Write protection of page 68 to 71 */
+#define OB_WRP_PAGES72TO75             0x00040000U   /*!< Write protection of page 72 to 75 */
+#define OB_WRP_PAGES76TO79             0x00080000U   /*!< Write protection of page 76 to 79 */
+#define OB_WRP_PAGES80TO83             0x00100000U   /*!< Write protection of page 80 to 83 */
+#define OB_WRP_PAGES84TO87             0x00200000U   /*!< Write protection of page 84 to 87 */
+#define OB_WRP_PAGES88TO91             0x00400000U   /*!< Write protection of page 88 to 91 */
+#define OB_WRP_PAGES92TO95             0x00800000U   /*!< Write protection of page 92 to 95 */
+#define OB_WRP_PAGES96TO99             0x01000000U   /*!< Write protection of page 96 to 99 */
+#define OB_WRP_PAGES100TO103           0x02000000U   /*!< Write protection of page 100 to 103 */
+#define OB_WRP_PAGES104TO107           0x04000000U   /*!< Write protection of page 104 to 107 */
+#define OB_WRP_PAGES108TO111           0x08000000U   /*!< Write protection of page 108 to 111 */
+#define OB_WRP_PAGES112TO115           0x10000000U   /*!< Write protection of page 112 to 115 */
+#define OB_WRP_PAGES116TO119           0x20000000U   /*!< Write protection of page 115 to 119 */
+#define OB_WRP_PAGES120TO123           0x40000000U   /*!< Write protection of page 120 to 123 */
+#define OB_WRP_PAGES124TO127           0x80000000U    /*!< Write protection of page 124 to 127 */
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+
+
+/* STM32 High-density, XL-density and Connectivity line devices */
+#if  defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) \
+  || defined(STM32F101xG) || defined(STM32F103xG) \
+  || defined(STM32F105xC) || defined(STM32F107xC)
+#define OB_WRP_PAGES0TO1               0x00000001U  /*!< Write protection of page 0 TO 1 */
+#define OB_WRP_PAGES2TO3               0x00000002U  /*!< Write protection of page 2 TO 3 */
+#define OB_WRP_PAGES4TO5               0x00000004U  /*!< Write protection of page 4 TO 5 */
+#define OB_WRP_PAGES6TO7               0x00000008U  /*!< Write protection of page 6 TO 7 */
+#define OB_WRP_PAGES8TO9               0x00000010U  /*!< Write protection of page 8 TO 9 */
+#define OB_WRP_PAGES10TO11             0x00000020U  /*!< Write protection of page 10 TO 11 */
+#define OB_WRP_PAGES12TO13             0x00000040U  /*!< Write protection of page 12 TO 13 */
+#define OB_WRP_PAGES14TO15             0x00000080U  /*!< Write protection of page 14 TO 15 */
+#define OB_WRP_PAGES16TO17             0x00000100U  /*!< Write protection of page 16 TO 17 */
+#define OB_WRP_PAGES18TO19             0x00000200U  /*!< Write protection of page 18 TO 19 */
+#define OB_WRP_PAGES20TO21             0x00000400U  /*!< Write protection of page 20 TO 21 */
+#define OB_WRP_PAGES22TO23             0x00000800U  /*!< Write protection of page 22 TO 23 */
+#define OB_WRP_PAGES24TO25             0x00001000U  /*!< Write protection of page 24 TO 25 */
+#define OB_WRP_PAGES26TO27             0x00002000U  /*!< Write protection of page 26 TO 27 */
+#define OB_WRP_PAGES28TO29             0x00004000U  /*!< Write protection of page 28 TO 29 */
+#define OB_WRP_PAGES30TO31             0x00008000U  /*!< Write protection of page 30 TO 31 */
+#define OB_WRP_PAGES32TO33             0x00010000U  /*!< Write protection of page 32 TO 33 */
+#define OB_WRP_PAGES34TO35             0x00020000U  /*!< Write protection of page 34 TO 35 */
+#define OB_WRP_PAGES36TO37             0x00040000U  /*!< Write protection of page 36 TO 37 */
+#define OB_WRP_PAGES38TO39             0x00080000U  /*!< Write protection of page 38 TO 39 */
+#define OB_WRP_PAGES40TO41             0x00100000U  /*!< Write protection of page 40 TO 41 */
+#define OB_WRP_PAGES42TO43             0x00200000U  /*!< Write protection of page 42 TO 43 */
+#define OB_WRP_PAGES44TO45             0x00400000U  /*!< Write protection of page 44 TO 45 */
+#define OB_WRP_PAGES46TO47             0x00800000U  /*!< Write protection of page 46 TO 47 */
+#define OB_WRP_PAGES48TO49             0x01000000U  /*!< Write protection of page 48 TO 49 */
+#define OB_WRP_PAGES50TO51             0x02000000U  /*!< Write protection of page 50 TO 51 */
+#define OB_WRP_PAGES52TO53             0x04000000U  /*!< Write protection of page 52 TO 53 */
+#define OB_WRP_PAGES54TO55             0x08000000U  /*!< Write protection of page 54 TO 55 */
+#define OB_WRP_PAGES56TO57             0x10000000U  /*!< Write protection of page 56 TO 57 */
+#define OB_WRP_PAGES58TO59             0x20000000U  /*!< Write protection of page 58 TO 59 */
+#define OB_WRP_PAGES60TO61             0x40000000U  /*!< Write protection of page 60 TO 61 */
+#define OB_WRP_PAGES62TO127            0x80000000U   /*!< Write protection of page 62 TO 127 */
+#define OB_WRP_PAGES62TO255            0x80000000U   /*!< Write protection of page 62 TO 255 */
+#define OB_WRP_PAGES62TO511            0x80000000U   /*!< Write protection of page 62 TO 511 */
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+       /* STM32F101xG || STM32F103xG */ 
+       /* STM32F105xC || STM32F107xC */
+
+#define OB_WRP_ALLPAGES                0xFFFFFFFFU  /*!< Write protection of all Pages */
+ 
+/* Low Density */
+#if  defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)
+#define OB_WRP_PAGES0TO31MASK          0x000000FFU 
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+
+/* Medium Density */
+#if  defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)
+#define OB_WRP_PAGES0TO31MASK          0x000000FFU
+#define OB_WRP_PAGES32TO63MASK         0x0000FF00U
+#define OB_WRP_PAGES64TO95MASK         0x00FF0000U
+#define OB_WRP_PAGES96TO127MASK        0xFF000000U
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
+       
+/* High Density */
+#if  defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)  
+#define OB_WRP_PAGES0TO15MASK          0x000000FFU
+#define OB_WRP_PAGES16TO31MASK         0x0000FF00U
+#define OB_WRP_PAGES32TO47MASK         0x00FF0000U
+#define OB_WRP_PAGES48TO255MASK        0xFF000000U
+#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
+
+/* XL Density */
+#if  defined(STM32F101xG) || defined(STM32F103xG) 
+#define OB_WRP_PAGES0TO15MASK          0x000000FFU
+#define OB_WRP_PAGES16TO31MASK         0x0000FF00U
+#define OB_WRP_PAGES32TO47MASK         0x00FF0000U
+#define OB_WRP_PAGES48TO511MASK        0xFF000000U
+#endif /* STM32F101xG || STM32F103xG */
+      
+/* Connectivity line devices */
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define OB_WRP_PAGES0TO15MASK          0x000000FFU
+#define OB_WRP_PAGES16TO31MASK         0x0000FF00U
+#define OB_WRP_PAGES32TO47MASK         0x00FF0000U
+#define OB_WRP_PAGES48TO127MASK        0xFF000000U
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OB_Read_Protection Option Byte Read Protection
+  * @{
+  */
+#define OB_RDP_LEVEL_0            ((uint8_t)0xA5)
+#define OB_RDP_LEVEL_1            ((uint8_t)0x00)
+/**
+  * @}
+  */
+  
+/** @defgroup FLASHEx_OB_IWatchdog Option Byte IWatchdog
+  * @{
+  */ 
+#define OB_IWDG_SW                ((uint16_t)0x0001)  /*!< Software IWDG selected */
+#define OB_IWDG_HW                ((uint16_t)0x0000)  /*!< Hardware IWDG selected */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OB_nRST_STOP Option Byte nRST STOP
+  * @{
+  */ 
+#define OB_STOP_NO_RST            ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST               ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASHEx_OB_nRST_STDBY Option Byte nRST STDBY
+  * @{
+  */ 
+#define OB_STDBY_NO_RST           ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST              ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
+/**
+  * @}
+  */
+
+#if defined(FLASH_BANK2_END)
+/** @defgroup FLASHEx_OB_BOOT1 Option Byte BOOT1
+  * @{
+  */
+#define OB_BOOT1_RESET            ((uint16_t)0x0000) /*!< BOOT1 Reset */
+#define OB_BOOT1_SET              ((uint16_t)0x0008) /*!< BOOT1 Set */
+/**
+  * @}
+  */
+#endif /* FLASH_BANK2_END */
+
+/** @defgroup FLASHEx_OB_Data_Address  Option Byte Data Address
+  * @{
+  */
+#define OB_DATA_ADDRESS_DATA0     0x1FFFF804U
+#define OB_DATA_ADDRESS_DATA1     0x1FFFF806U
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASHEx_Constants
+  * @{
+  */ 
+
+/** @defgroup FLASH_Flag_definition Flag definition
+  * @brief Flag definition
+  * @{
+  */
+#if defined(FLASH_BANK2_END)
+ #define FLASH_FLAG_BSY             FLASH_FLAG_BSY_BANK1       /*!< FLASH Bank1 Busy flag                   */ 
+ #define FLASH_FLAG_PGERR           FLASH_FLAG_PGERR_BANK1     /*!< FLASH Bank1 Programming error flag      */
+ #define FLASH_FLAG_WRPERR          FLASH_FLAG_WRPERR_BANK1    /*!< FLASH Bank1 Write protected error flag  */
+ #define FLASH_FLAG_EOP             FLASH_FLAG_EOP_BANK1       /*!< FLASH Bank1 End of Operation flag       */
+
+ #define FLASH_FLAG_BSY_BANK1       FLASH_SR_BSY               /*!< FLASH Bank1 Busy flag                   */ 
+ #define FLASH_FLAG_PGERR_BANK1     FLASH_SR_PGERR             /*!< FLASH Bank1 Programming error flag      */
+ #define FLASH_FLAG_WRPERR_BANK1    FLASH_SR_WRPRTERR          /*!< FLASH Bank1 Write protected error flag  */
+ #define FLASH_FLAG_EOP_BANK1       FLASH_SR_EOP               /*!< FLASH Bank1 End of Operation flag       */
+       
+ #define FLASH_FLAG_BSY_BANK2       (FLASH_SR2_BSY << 16U)      /*!< FLASH Bank2 Busy flag                   */ 
+ #define FLASH_FLAG_PGERR_BANK2     (FLASH_SR2_PGERR << 16U)    /*!< FLASH Bank2 Programming error flag      */
+ #define FLASH_FLAG_WRPERR_BANK2    (FLASH_SR2_WRPRTERR << 16U) /*!< FLASH Bank2 Write protected error flag  */
+ #define FLASH_FLAG_EOP_BANK2       (FLASH_SR2_EOP << 16U)      /*!< FLASH Bank2 End of Operation flag       */
+
+#else  
+
+ #define FLASH_FLAG_BSY             FLASH_SR_BSY              /*!< FLASH Busy flag                          */ 
+ #define FLASH_FLAG_PGERR           FLASH_SR_PGERR            /*!< FLASH Programming error flag             */
+ #define FLASH_FLAG_WRPERR          FLASH_SR_WRPRTERR         /*!< FLASH Write protected error flag         */
+ #define FLASH_FLAG_EOP             FLASH_SR_EOP              /*!< FLASH End of Operation flag              */
+
+#endif
+ #define FLASH_FLAG_OPTVERR         ((OBR_REG_INDEX << 8U | FLASH_OBR_OPTERR)) /*!< Option Byte Error        */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Interrupt_definition Interrupt definition
+  * @brief FLASH Interrupt definition
+  * @{
+  */
+#if defined(FLASH_BANK2_END)
+ #define FLASH_IT_EOP               FLASH_IT_EOP_BANK1        /*!< End of FLASH Operation Interrupt source Bank1 */
+ #define FLASH_IT_ERR               FLASH_IT_ERR_BANK1        /*!< Error Interrupt source Bank1                  */
+
+ #define FLASH_IT_EOP_BANK1         FLASH_CR_EOPIE            /*!< End of FLASH Operation Interrupt source Bank1 */
+ #define FLASH_IT_ERR_BANK1         FLASH_CR_ERRIE            /*!< Error Interrupt source Bank1                  */
+
+ #define FLASH_IT_EOP_BANK2         (FLASH_CR2_EOPIE << 16U)   /*!< End of FLASH Operation Interrupt source Bank2 */
+ #define FLASH_IT_ERR_BANK2         (FLASH_CR2_ERRIE << 16U)   /*!< Error Interrupt source Bank2                  */
+
+#else
+
+ #define FLASH_IT_EOP               FLASH_CR_EOPIE          /*!< End of FLASH Operation Interrupt source */
+ #define FLASH_IT_ERR               FLASH_CR_ERRIE          /*!< Error Interrupt source                  */
+
+#endif
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */
+  
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Macros FLASHEx Exported Macros
+  * @{
+  */
+
+/** @defgroup FLASH_Interrupt Interrupt
+ *  @brief macros to handle FLASH interrupts
+ * @{
+ */ 
+
+#if defined(FLASH_BANK2_END)
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *     This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1
+  *     @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1
+  *     @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2
+  *     @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2
+  * @retval none
+  */ 
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  do { \
+                          /* Enable Bank1 IT */ \
+                          SET_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \
+                          /* Enable Bank2 IT */ \
+                          SET_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \
+                    } while(0U)
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *     This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1
+  *     @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1
+  *     @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2
+  *     @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2
+  * @retval none
+  */ 
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  do { \
+                          /* Disable Bank1 IT */ \
+                          CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \
+                          /* Disable Bank2 IT */ \
+                          CLEAR_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \
+                    } while(0U)
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__ specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref FLASH_FLAG_EOP_BANK1    FLASH End of Operation flag on bank1
+  *            @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1
+  *            @arg @ref FLASH_FLAG_PGERR_BANK1  FLASH Programming error flag on bank1
+  *            @arg @ref FLASH_FLAG_BSY_BANK1    FLASH Busy flag on bank1
+  *            @arg @ref FLASH_FLAG_EOP_BANK2    FLASH End of Operation flag on bank2
+  *            @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2
+  *            @arg @ref FLASH_FLAG_PGERR_BANK2  FLASH Programming error flag on bank2
+  *            @arg @ref FLASH_FLAG_BSY_BANK2    FLASH Busy flag on bank2
+  *            @arg @ref FLASH_FLAG_OPTVERR  Loaded OB and its complement do not match
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \
+                                            (FLASH->OBR & FLASH_OBR_OPTERR) : \
+                                        ((((__FLAG__) & SR_FLAG_MASK) != RESET)? \
+                                            (FLASH->SR & ((__FLAG__) & SR_FLAG_MASK)) : \
+                                            (FLASH->SR2 & ((__FLAG__) >> 16U))))
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__ specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref FLASH_FLAG_EOP_BANK1    FLASH End of Operation flag on bank1
+  *            @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1
+  *            @arg @ref FLASH_FLAG_PGERR_BANK1  FLASH Programming error flag on bank1
+  *            @arg @ref FLASH_FLAG_BSY_BANK1    FLASH Busy flag on bank1
+  *            @arg @ref FLASH_FLAG_EOP_BANK2    FLASH End of Operation flag on bank2
+  *            @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2
+  *            @arg @ref FLASH_FLAG_PGERR_BANK2  FLASH Programming error flag on bank2
+  *            @arg @ref FLASH_FLAG_BSY_BANK2    FLASH Busy flag on bank2
+  *            @arg @ref FLASH_FLAG_OPTVERR  Loaded OB and its complement do not match
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)  do { \
+                          /* Clear FLASH_FLAG_OPTVERR flag */ \
+                          if ((__FLAG__) == FLASH_FLAG_OPTVERR) \
+                          { \
+                            CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \
+                          } \
+                          else { \
+                          /* Clear Flag in Bank1 */ \
+                          if (((__FLAG__) & SR_FLAG_MASK) != RESET) \
+                          { \
+                            FLASH->SR  = ((__FLAG__) & SR_FLAG_MASK); \
+                          } \
+                          /* Clear Flag in Bank2 */ \
+                          if (((__FLAG__) >> 16U) != RESET) \
+                          { \
+                            FLASH->SR2 = ((__FLAG__) >> 16U); \
+                          } \
+                          } \
+                    } while(0U)
+#else
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+  *     @arg @ref FLASH_IT_ERR Error Interrupt    
+  * @retval none
+  */ 
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+  *     @arg @ref FLASH_IT_ERR Error Interrupt    
+  * @retval none
+  */ 
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)   (FLASH->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__ specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref FLASH_FLAG_EOP    FLASH End of Operation flag 
+  *            @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag 
+  *            @arg @ref FLASH_FLAG_PGERR  FLASH Programming error flag
+  *            @arg @ref FLASH_FLAG_BSY    FLASH Busy flag
+  *            @arg @ref FLASH_FLAG_OPTVERR  Loaded OB and its complement do not match
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)  (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \
+                                            (FLASH->OBR & FLASH_OBR_OPTERR) : \
+                                            (FLASH->SR & (__FLAG__)))
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__ specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref FLASH_FLAG_EOP    FLASH End of Operation flag 
+  *            @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag 
+  *            @arg @ref FLASH_FLAG_PGERR  FLASH Programming error flag 
+  *            @arg @ref FLASH_FLAG_OPTVERR  Loaded OB and its complement do not match
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   do { \
+                          /* Clear FLASH_FLAG_OPTVERR flag */ \
+                          if ((__FLAG__) == FLASH_FLAG_OPTVERR) \
+                          { \
+                            CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \
+                          } \
+                          else { \
+                            /* Clear Flag in Bank1 */ \
+                            FLASH->SR  = (__FLAG__); \
+                          } \
+                    } while(0U)
+
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef  HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
+HAL_StatusTypeDef  HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef  HAL_FLASHEx_OBErase(void);
+HAL_StatusTypeDef  HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void               HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+uint32_t           HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h

@@ -0,0 +1,308 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_gpio.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_GPIO_H
+#define STM32F1xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+  * @{
+  */
+
+/**
+  * @brief GPIO Init structure definition
+  */
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins_define */
+
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode_define */
+
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull_define */
+
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed_define */
+} GPIO_InitTypeDef;
+
+/**
+  * @brief  GPIO Bit SET and Bit RESET enumeration
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0u,
+  GPIO_PIN_SET
+} GPIO_PinState;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+  * @{
+  */
+#define GPIO_PIN_0                 ((uint16_t)0x0001)  /* Pin 0 selected    */
+#define GPIO_PIN_1                 ((uint16_t)0x0002)  /* Pin 1 selected    */
+#define GPIO_PIN_2                 ((uint16_t)0x0004)  /* Pin 2 selected    */
+#define GPIO_PIN_3                 ((uint16_t)0x0008)  /* Pin 3 selected    */
+#define GPIO_PIN_4                 ((uint16_t)0x0010)  /* Pin 4 selected    */
+#define GPIO_PIN_5                 ((uint16_t)0x0020)  /* Pin 5 selected    */
+#define GPIO_PIN_6                 ((uint16_t)0x0040)  /* Pin 6 selected    */
+#define GPIO_PIN_7                 ((uint16_t)0x0080)  /* Pin 7 selected    */
+#define GPIO_PIN_8                 ((uint16_t)0x0100)  /* Pin 8 selected    */
+#define GPIO_PIN_9                 ((uint16_t)0x0200)  /* Pin 9 selected    */
+#define GPIO_PIN_10                ((uint16_t)0x0400)  /* Pin 10 selected   */
+#define GPIO_PIN_11                ((uint16_t)0x0800)  /* Pin 11 selected   */
+#define GPIO_PIN_12                ((uint16_t)0x1000)  /* Pin 12 selected   */
+#define GPIO_PIN_13                ((uint16_t)0x2000)  /* Pin 13 selected   */
+#define GPIO_PIN_14                ((uint16_t)0x4000)  /* Pin 14 selected   */
+#define GPIO_PIN_15                ((uint16_t)0x8000)  /* Pin 15 selected   */
+#define GPIO_PIN_All               ((uint16_t)0xFFFF)  /* All pins selected */
+
+#define GPIO_PIN_MASK              0x0000FFFFu /* PIN mask for assert test */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+  * @brief GPIO Configuration Mode
+  *        Elements values convention: 0xX0yz00YZ
+  *           - X  : GPIO mode or EXTI Mode
+  *           - y  : External IT or Event trigger detection
+  *           - z  : IO configuration on External IT or Event
+  *           - Y  : Output type (Push Pull or Open Drain)
+  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @{
+  */
+#define  GPIO_MODE_INPUT                        0x00000000u   /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    0x00000001u   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    0x00000011u   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        0x00000002u   /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        0x00000012u   /*!< Alternate Function Open Drain Mode    */
+#define  GPIO_MODE_AF_INPUT                     GPIO_MODE_INPUT          /*!< Alternate Function Input Mode         */
+
+#define  GPIO_MODE_ANALOG                       0x00000003u   /*!< Analog Mode  */
+
+#define  GPIO_MODE_IT_RISING                    0x10110000u   /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   0x10210000u   /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            0x10310000u   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+
+#define  GPIO_MODE_EVT_RISING                   0x10120000u   /*!< External Event Mode with Rising edge trigger detection               */
+#define  GPIO_MODE_EVT_FALLING                  0x10220000u   /*!< External Event Mode with Falling edge trigger detection              */
+#define  GPIO_MODE_EVT_RISING_FALLING           0x10320000u   /*!< External Event Mode with Rising/Falling edge trigger detection       */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_speed_define  GPIO speed define
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */
+#define  GPIO_SPEED_FREQ_LOW              (GPIO_CRL_MODE0_1) /*!< Low speed */
+#define  GPIO_SPEED_FREQ_MEDIUM           (GPIO_CRL_MODE0_0) /*!< Medium speed */
+#define  GPIO_SPEED_FREQ_HIGH             (GPIO_CRL_MODE0)   /*!< High speed */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_pull_define GPIO pull define
+  * @brief GPIO Pull-Up or Pull-Down Activation
+  * @{
+  */
+#define  GPIO_NOPULL        0x00000000u   /*!< No Pull-up or Pull-down activation  */
+#define  GPIO_PULLUP        0x00000001u   /*!< Pull-up activation                  */
+#define  GPIO_PULLDOWN      0x00000002u   /*!< Pull-down activation                */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  __EXTI_LINE__: specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+  * @}
+  */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f1xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void  HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
+/**
+  * @}
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+  * @{
+  */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(PIN)           (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00u) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00u))
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_PP)          ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_OD)          ||\
+                            ((MODE) == GPIO_MODE_AF_PP)              ||\
+                            ((MODE) == GPIO_MODE_AF_OD)              ||\
+                            ((MODE) == GPIO_MODE_IT_RISING)          ||\
+                            ((MODE) == GPIO_MODE_IT_FALLING)         ||\
+                            ((MODE) == GPIO_MODE_IT_RISING_FALLING)  ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING)         ||\
+                            ((MODE) == GPIO_MODE_EVT_FALLING)        ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+                            ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || \
+                              ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || ((SPEED) == GPIO_SPEED_FREQ_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+                            ((PULL) == GPIO_PULLDOWN))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

@@ -0,0 +1,894 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_gpio_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_GPIO_EX_H
+#define STM32F1xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIOEx GPIOEx
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration
+  * @brief This section propose definition to use the Cortex EVENTOUT signal.
+  * @{
+  */
+
+/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin
+  * @{
+  */
+
+#define AFIO_EVENTOUT_PIN_0  AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */
+#define AFIO_EVENTOUT_PIN_1  AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */
+#define AFIO_EVENTOUT_PIN_2  AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */
+#define AFIO_EVENTOUT_PIN_3  AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */
+#define AFIO_EVENTOUT_PIN_4  AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */
+#define AFIO_EVENTOUT_PIN_5  AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */
+#define AFIO_EVENTOUT_PIN_6  AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */
+#define AFIO_EVENTOUT_PIN_7  AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */
+#define AFIO_EVENTOUT_PIN_8  AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */
+#define AFIO_EVENTOUT_PIN_9  AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */
+#define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */
+#define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */
+#define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */
+#define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */
+#define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */
+#define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */
+
+#define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_1) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_2) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_3) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_4) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_5) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_6) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_7) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_8) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_9) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_10) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_11) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_12) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_13) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_14) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_15))
+/**
+  * @}
+  */
+
+/** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port
+  * @{
+  */
+
+#define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */
+#define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */
+#define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */
+#define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */
+#define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */
+
+#define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \
+                                         ((__PORT__) == AFIO_EVENTOUT_PORT_B) || \
+                                         ((__PORT__) == AFIO_EVENTOUT_PORT_C) || \
+                                         ((__PORT__) == AFIO_EVENTOUT_PORT_D) || \
+                                         ((__PORT__) == AFIO_EVENTOUT_PORT_E))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping
+  * @brief This section propose definition to remap the alternate function to some other port/pins.
+  * @{
+  */
+
+/**
+  * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
+  * @note  ENABLE: Remap     (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SPI1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_SPI1_REMAP)
+
+/**
+  * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
+  * @note  DISABLE: No remap (NSS/PA4,  SCK/PA5, MISO/PA6, MOSI/PA7)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SPI1_DISABLE()  AFIO_REMAP_DISABLE(AFIO_MAPR_SPI1_REMAP)
+
+/**
+  * @brief Enable the remapping of I2C1 alternate function SCL and SDA.
+  * @note  ENABLE: Remap     (SCL/PB8, SDA/PB9)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_I2C1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_I2C1_REMAP)
+
+/**
+  * @brief Disable the remapping of I2C1 alternate function SCL and SDA.
+  * @note  DISABLE: No remap (SCL/PB6, SDA/PB7)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_I2C1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_I2C1_REMAP)
+
+/**
+  * @brief Enable the remapping of USART1 alternate function TX and RX.
+  * @note  ENABLE: Remap     (TX/PB6, RX/PB7)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_USART1_REMAP)
+
+/**
+  * @brief Disable the remapping of USART1 alternate function TX and RX.
+  * @note  DISABLE: No remap (TX/PA9, RX/PA10)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART1_REMAP)
+
+/**
+  * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
+  * @note  ENABLE: Remap     (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART2_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_USART2_REMAP)
+
+/**
+  * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
+  * @note  DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART2_REMAP)
+
+/**
+  * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
+  * @note  ENABLE: Full remap     (TX/PD8,  RX/PD9,  CK/PD10, CTS/PD11, RTS/PD12)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART3_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_FULLREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
+  * @note  PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART3_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_PARTIALREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
+
+/**
+  * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
+  * @note  DISABLE: No remap      (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART3_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_NOREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
+  * @note  ENABLE: Full remap     (ETR/PE7,  CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8,  CH2N/PE10, CH3N/PE12)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_FULLREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
+  * @note  PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9,  CH3/PA10, CH4/PA11, BKIN/PA6,  CH1N/PA7,  CH2N/PB0,  CH3N/PB1)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_PARTIALREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
+
+/**
+  * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
+  * @note  DISABLE: No remap      (ETR/PA12, CH1/PA8, CH2/PA9,  CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_NOREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
+  * @note  ENABLE: Full remap       (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM2_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_FULLREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
+  * @note  PARTIAL_2: Partial remap (CH1/ETR/PA0,  CH2/PA1, CH3/PB10, CH4/PB11)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
+  * @note  PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2,  CH4/PA3)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
+
+/**
+  * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
+  * @note  DISABLE: No remap        (CH1/ETR/PA0,  CH2/PA1, CH3/PA2,  CH4/PA3)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM2_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_NOREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM3 alternate function channels 1 to 4
+  * @note  ENABLE: Full remap     (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9)
+  * @note  TIM3_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM3_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_FULLREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM3 alternate function channels 1 to 4
+  * @note  PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1)
+  * @note  TIM3_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM3_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_PARTIALREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
+
+/**
+  * @brief Disable the remapping of TIM3 alternate function channels 1 to 4
+  * @note  DISABLE: No remap      (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1)
+  * @note  TIM3_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM3_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_NOREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM4 alternate function channels 1 to 4.
+  * @note  ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15)
+  * @note  TIM4_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM4_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_TIM4_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM4 alternate function channels 1 to 4.
+  * @note  DISABLE: No remap  (TIM4_CH1/PB6,  TIM4_CH2/PB7,  TIM4_CH3/PB8,  TIM4_CH4/PB9)
+  * @note  TIM4_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM4_REMAP)
+
+#if defined(AFIO_MAPR_CAN_REMAP_REMAP1)
+
+/**
+  * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
+  * @note  CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN1_1()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP1, AFIO_MAPR_CAN_REMAP)
+
+/**
+  * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
+  * @note  CASE 2: CAN_RX mapped to PB8,  CAN_TX mapped to PB9 (not available on 36-pin package)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN1_2()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP2, AFIO_MAPR_CAN_REMAP)
+
+/**
+  * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
+  * @note  CASE 3: CAN_RX mapped to PD0,  CAN_TX mapped to PD1
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN1_3()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP3, AFIO_MAPR_CAN_REMAP)
+
+#endif
+
+/**
+  * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used
+  *        (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
+  *        OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
+  *        on 100-pin and 144-pin packages, no need for remapping).
+  * @note  ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_PD01_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_PD01_REMAP)
+
+/**
+  * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used
+  *        (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
+  *        OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
+  *        on 100-pin and 144-pin packages, no need for remapping).
+  * @note  DISABLE: No remapping of PD0 and PD1
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_PD01_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PD01_REMAP)
+
+#if defined(AFIO_MAPR_TIM5CH4_IREMAP)
+/**
+  * @brief Enable the remapping of TIM5CH4.
+  * @note  ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose.
+  * @note  This function is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_TIM5CH4_IREMAP)
+
+/**
+  * @brief Disable the remapping of TIM5CH4.
+  * @note  DISABLE: TIM5_CH4 is connected to PA3
+  * @note  This function is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM5CH4_IREMAP)
+#endif
+
+#if defined(AFIO_MAPR_ETH_REMAP)
+/**
+  * @brief Enable the remapping of Ethernet MAC connections with the PHY.
+  * @note  ENABLE: Remap     (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ETH_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ETH_REMAP)
+
+/**
+  * @brief Disable the remapping of Ethernet MAC connections with the PHY.
+  * @note  DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5,  RXD2/PB0,  RXD3/PB1)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ETH_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ETH_REMAP)
+#endif
+
+#if defined(AFIO_MAPR_CAN2_REMAP)
+
+/**
+  * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
+  * @note  ENABLE: Remap     (CAN2_RX/PB5,  CAN2_TX/PB6)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN2_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_CAN2_REMAP)
+
+/**
+  * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
+  * @note  DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_CAN2_REMAP)
+#endif
+
+#if defined(AFIO_MAPR_MII_RMII_SEL)
+/**
+  * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
+  * @note  ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_ETH_RMII() AFIO_REMAP_ENABLE(AFIO_MAPR_MII_RMII_SEL)
+
+/**
+  * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
+  * @note  ETH_MII: Configure Ethernet MAC for connection with an MII PHY
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_ETH_MII()  AFIO_REMAP_DISABLE(AFIO_MAPR_MII_RMII_SEL)
+#endif
+
+/**
+  * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
+  * @note  ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
+  * @note  DISABLE: ADC1 External trigger injected conversion is connected to EXTI15
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP)
+
+/**
+  * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
+  * @note  ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
+  * @note  DISABLE: ADC1 External trigger regular conversion is connected to EXTI11
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP)
+
+#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
+
+/**
+  * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
+  * @note  ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
+  * @note  DISABLE: ADC2 External trigger injected conversion is connected to EXTI15
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
+#endif
+
+#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP)
+
+/**
+  * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
+  * @note  ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
+  * @note  DISABLE: ADC2 External trigger regular conversion is connected to EXTI11
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP)
+#endif
+
+/**
+  * @brief Enable the Serial wire JTAG configuration
+  * @note  ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SWJ_ENABLE()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET)
+
+/**
+  * @brief Enable the Serial wire JTAG configuration
+  * @note  NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SWJ_NONJTRST()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_NOJNTRST)
+
+/**
+  * @brief Enable the Serial wire JTAG configuration
+  * @note  NOJTAG: JTAG-DP Disabled and SW-DP Enabled
+  * @retval None
+  */
+
+#define __HAL_AFIO_REMAP_SWJ_NOJTAG()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE)
+
+/**
+  * @brief Disable the Serial wire JTAG configuration
+  * @note  DISABLE: JTAG-DP Disabled and SW-DP Disabled
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SWJ_DISABLE()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE)
+
+#if defined(AFIO_MAPR_SPI3_REMAP)
+
+/**
+  * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
+  * @note  ENABLE: Remap     (SPI3_NSS-I2S3_WS/PA4,  SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SPI3_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_SPI3_REMAP)
+
+/**
+  * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
+  * @note  DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3,  SPI3_MISO/PB4,  SPI3_MOSI-I2S3_SD/PB5).
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SPI3_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI3_REMAP)
+#endif
+
+#if defined(AFIO_MAPR_TIM2ITR1_IREMAP)
+
+/**
+  * @brief Control of TIM2_ITR1 internal mapping.
+  * @note  TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes.
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_TIM2ITR1_TO_USB() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM2ITR1_IREMAP)
+
+/**
+  * @brief Control of TIM2_ITR1 internal mapping.
+  * @note  TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes.
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_TIM2ITR1_TO_ETH() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM2ITR1_IREMAP)
+#endif
+
+#if defined(AFIO_MAPR_PTP_PPS_REMAP)
+
+/**
+  * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
+  * @note  ENABLE: PTP_PPS is output on PB5 pin.
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_ETH_PTP_PPS_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_PTP_PPS_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
+  * @note  DISABLE: PTP_PPS not output on PB5 pin.
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PTP_PPS_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM9_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2.
+  * @note  ENABLE: Remap     (TIM9_CH1 on PE5 and TIM9_CH2 on PE6).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM9_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2.
+  * @note  DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM10_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM10_CH1.
+  * @note  ENABLE: Remap     (TIM10_CH1 on PF6).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM10_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM10_CH1.
+  * @note  DISABLE: No remap (TIM10_CH1 on PB8).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM11_REMAP)
+/**
+  * @brief Enable the remapping of TIM11_CH1.
+  * @note  ENABLE: Remap     (TIM11_CH1 on PF7).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM11_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM11_CH1.
+  * @note  DISABLE: No remap (TIM11_CH1 on PB9).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM13_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM13_CH1.
+  * @note  ENABLE: Remap     STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM13_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM13_CH1.
+  * @note  DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM14_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM14_CH1.
+  * @note  ENABLE: Remap     STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM14_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM14_CH1.
+  * @note  DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_FSMC_NADV_REMAP)
+
+/**
+  * @brief Controls the use of the optional FSMC_NADV signal.
+  * @note  DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral.
+  * @retval None
+  */
+#define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP)
+
+/**
+  * @brief Controls the use of the optional FSMC_NADV signal.
+  * @note  CONNECTED: The NADV signal is connected to the output (default).
+  * @retval None
+  */
+#define __HAL_AFIO_FSMCNADV_CONNECTED()    CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM15_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2.
+  * @note  ENABLE: Remap     (TIM15_CH1 on PB14 and TIM15_CH2 on PB15).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM15_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2.
+  * @note  DISABLE: No remap (TIM15_CH1 on PA2  and TIM15_CH2 on PA3).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM16_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM16_CH1.
+  * @note  ENABLE: Remap     (TIM16_CH1 on PA6).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM16_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM16_CH1.
+  * @note  DISABLE: No remap (TIM16_CH1 on PB8).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM17_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM17_CH1.
+  * @note  ENABLE: Remap     (TIM17_CH1 on PA7).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM17_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM17_CH1.
+  * @note  DISABLE: No remap (TIM17_CH1 on PB9).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_CEC_REMAP)
+
+/**
+  * @brief Enable the remapping of CEC.
+  * @note  ENABLE: Remap     (CEC on PB10).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CEC_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP)
+
+/**
+  * @brief Disable the remapping of CEC.
+  * @note  DISABLE: No remap (CEC on PB8).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM1_DMA_REMAP)
+
+/**
+  * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels.
+  * @note  ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1DMA_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP)
+
+/**
+  * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels.
+  * @note  DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
+
+/**
+  * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels.
+  * @note  ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
+
+/**
+  * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels.
+  * @note  DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM12_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2.
+  * @note  ENABLE: Remap     (TIM12_CH1 on PB12 and TIM12_CH2 on PB13).
+  * @note  This bit is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM12_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2.
+  * @note  DISABLE: No remap (TIM12_CH1 on PC4  and TIM12_CH2 on PC5).
+  * @note  This bit is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_MISC_REMAP)
+
+/**
+  * @brief Miscellaneous features remapping.
+  *        This bit is set and cleared by software. It controls miscellaneous features.
+  *        The DMA2 channel 5 interrupt position in the vector table.
+  *        The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register).
+  * @note  ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is
+  *        selected as DAC Trigger 3, TIM15 triggers TIM1/3.
+  * @note  This bit is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_MISC_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP)
+
+/**
+  * @brief Miscellaneous features remapping.
+  *        This bit is set and cleared by software. It controls miscellaneous features.
+  *        The DMA2 channel 5 interrupt position in the vector table.
+  *        The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register).
+  * @note  DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO
+  *        event is selected as DAC Trigger 3, TIM5 triggers TIM1/3.
+  * @note  This bit is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP)
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros
+  * @{
+  */
+#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
+                                   ((__GPIOx__) == (GPIOB))? 1uL :\
+                                   ((__GPIOx__) == (GPIOC))? 2uL :3uL)
+#elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
+                                   ((__GPIOx__) == (GPIOB))? 1uL :\
+                                   ((__GPIOx__) == (GPIOC))? 2uL :\
+                                   ((__GPIOx__) == (GPIOD))? 3uL :4uL)
+#elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
+                                   ((__GPIOx__) == (GPIOB))? 1uL :\
+                                   ((__GPIOx__) == (GPIOC))? 2uL :\
+                                   ((__GPIOx__) == (GPIOD))? 3uL :\
+                                   ((__GPIOx__) == (GPIOE))? 4uL :\
+                                   ((__GPIOx__) == (GPIOF))? 5uL :6uL)
+#endif
+
+#define AFIO_REMAP_ENABLE(REMAP_PIN)       do{ uint32_t tmpreg = AFIO->MAPR; \
+                                               tmpreg |= AFIO_MAPR_SWJ_CFG;  \
+                                               tmpreg |= REMAP_PIN;          \
+                                               AFIO->MAPR = tmpreg;          \
+                                               }while(0u)
+
+#define AFIO_REMAP_DISABLE(REMAP_PIN)      do{ uint32_t tmpreg = AFIO->MAPR;  \
+                                               tmpreg |= AFIO_MAPR_SWJ_CFG;   \
+                                               tmpreg &= ~REMAP_PIN;          \
+                                               AFIO->MAPR = tmpreg;           \
+                                               }while(0u)
+
+#define AFIO_REMAP_PARTIAL(REMAP_PIN, REMAP_PIN_MASK) do{ uint32_t tmpreg = AFIO->MAPR; \
+                                                          tmpreg &= ~REMAP_PIN_MASK;    \
+                                                          tmpreg |= AFIO_MAPR_SWJ_CFG;  \
+                                                          tmpreg |= REMAP_PIN;          \
+                                                          AFIO->MAPR = tmpreg;          \
+                                                          }while(0u)
+
+#define AFIO_DBGAFR_CONFIG(DBGAFR_SWJCFG)  do{ uint32_t tmpreg = AFIO->MAPR;     \
+                                               tmpreg &= ~AFIO_MAPR_SWJ_CFG_Msk; \
+                                               tmpreg |= DBGAFR_SWJCFG;          \
+                                               AFIO->MAPR = tmpreg;              \
+                                               }while(0u)
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup GPIOEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIOEx_Exported_Functions_Group1
+  * @{
+  */
+void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource);
+void HAL_GPIOEx_EnableEventout(void);
+void HAL_GPIOEx_DisableEventout(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_hcd.h

@@ -0,0 +1,318 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_hcd.h
+  * @author  MCD Application Team
+  * @brief   Header file of HCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_HCD_H
+#define STM32F1xx_HAL_HCD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_usb.h"
+
+#if defined (USB_OTG_FS)
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HCD HCD
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Types HCD Exported Types
+  * @{
+  */
+
+/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition
+  * @{
+  */
+typedef enum
+{
+  HAL_HCD_STATE_RESET    = 0x00,
+  HAL_HCD_STATE_READY    = 0x01,
+  HAL_HCD_STATE_ERROR    = 0x02,
+  HAL_HCD_STATE_BUSY     = 0x03,
+  HAL_HCD_STATE_TIMEOUT  = 0x04
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef   HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef      HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef       HCD_HCTypeDef;
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef;
+typedef USB_OTG_HCStateTypeDef  HCD_HCStateTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition
+  * @{
+  */
+#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
+typedef struct __HCD_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
+{
+  HCD_TypeDef               *Instance;  /*!< Register base address    */
+  HCD_InitTypeDef           Init;       /*!< HCD required parameters  */
+  HCD_HCTypeDef             hc[16];     /*!< Host channels parameters */
+  HAL_LockTypeDef           Lock;       /*!< HCD peripheral status    */
+  __IO HCD_StateTypeDef     State;      /*!< HCD communication state  */
+  __IO  uint32_t            ErrorCode;  /*!< HCD Error code           */
+  void                      *pData;     /*!< Pointer Stack Handler    */
+#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
+  void (* SOFCallback)(struct __HCD_HandleTypeDef *hhcd);                               /*!< USB OTG HCD SOF callback                */
+  void (* ConnectCallback)(struct __HCD_HandleTypeDef *hhcd);                           /*!< USB OTG HCD Connect callback            */
+  void (* DisconnectCallback)(struct __HCD_HandleTypeDef *hhcd);                        /*!< USB OTG HCD Disconnect callback         */
+  void (* PortEnabledCallback)(struct __HCD_HandleTypeDef *hhcd);                       /*!< USB OTG HCD Port Enable callback        */
+  void (* PortDisabledCallback)(struct __HCD_HandleTypeDef *hhcd);                      /*!< USB OTG HCD Port Disable callback       */
+  void (* HC_NotifyURBChangeCallback)(struct __HCD_HandleTypeDef *hhcd, uint8_t chnum,
+                                      HCD_URBStateTypeDef urb_state);                   /*!< USB OTG HCD Host Channel Notify URB Change callback  */
+
+  void (* MspInitCallback)(struct __HCD_HandleTypeDef *hhcd);                           /*!< USB OTG HCD Msp Init callback           */
+  void (* MspDeInitCallback)(struct __HCD_HandleTypeDef *hhcd);                         /*!< USB OTG HCD Msp DeInit callback         */
+#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
+} HCD_HandleTypeDef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants HCD Exported Constants
+  * @{
+  */
+
+/** @defgroup HCD_Speed HCD Speed
+  * @{
+  */
+#define HCD_SPEED_FULL               USBH_FSLS_SPEED
+#define HCD_SPEED_LOW                USBH_FSLS_SPEED
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Device_Speed HCD Device Speed
+  * @{
+  */
+#define HCD_DEVICE_SPEED_HIGH               0U
+#define HCD_DEVICE_SPEED_FULL               1U
+#define HCD_DEVICE_SPEED_LOW                2U
+/**
+  * @}
+  */
+
+/** @defgroup HCD_PHY_Module HCD PHY Module
+  * @{
+  */
+#define HCD_PHY_ULPI                 1U
+#define HCD_PHY_EMBEDDED             2U
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Error_Code_definition HCD Error Code definition
+  * @brief  HCD Error Code definition
+  * @{
+  */
+#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
+#define  HAL_HCD_ERROR_INVALID_CALLBACK                        (0x00000010U)    /*!< Invalid Callback error  */
+#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Macros HCD Exported Macros
+  *  @brief macros to handle interrupts and specific clock configurations
+  * @{
+  */
+#define __HAL_HCD_ENABLE(__HANDLE__)                   (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__)                  (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance)\
+                                                             & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__)  (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum)             (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum)           (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum)              (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum)            (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HCD_Exported_Functions HCD Exported Functions
+  * @{
+  */
+
+/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
+                                  uint8_t epnum, uint8_t dev_address,
+                                  uint8_t speed, uint8_t ep_type, uint16_t mps);
+
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
+void              HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void              HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+
+#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
+/** @defgroup HAL_HCD_Callback_ID_enumeration_definition HAL USB OTG HCD Callback ID enumeration definition
+  * @brief  HAL USB OTG HCD Callback ID enumeration definition
+  * @{
+  */
+typedef enum
+{
+  HAL_HCD_SOF_CB_ID            = 0x01,       /*!< USB HCD SOF callback ID           */
+  HAL_HCD_CONNECT_CB_ID        = 0x02,       /*!< USB HCD Connect callback ID       */
+  HAL_HCD_DISCONNECT_CB_ID     = 0x03,       /*!< USB HCD Disconnect callback ID    */
+  HAL_HCD_PORT_ENABLED_CB_ID   = 0x04,       /*!< USB HCD Port Enable callback ID   */
+  HAL_HCD_PORT_DISABLED_CB_ID  = 0x05,       /*!< USB HCD Port Disable callback ID  */
+
+  HAL_HCD_MSPINIT_CB_ID        = 0x06,       /*!< USB HCD MspInit callback ID       */
+  HAL_HCD_MSPDEINIT_CB_ID      = 0x07        /*!< USB HCD MspDeInit callback ID     */
+
+} HAL_HCD_CallbackIDTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HCD_Callback_pointer_definition HAL USB OTG HCD Callback pointer definition
+  * @brief  HAL USB OTG HCD Callback pointer definition
+  * @{
+  */
+
+typedef void (*pHCD_CallbackTypeDef)(HCD_HandleTypeDef *hhcd);                   /*!< pointer to a common USB OTG HCD callback function  */
+typedef void (*pHCD_HC_NotifyURBChangeCallbackTypeDef)(HCD_HandleTypeDef *hhcd,
+                                                       uint8_t epnum,
+                                                       HCD_URBStateTypeDef urb_state);   /*!< pointer to USB OTG HCD host channel  callback */
+/**
+  * @}
+  */
+
+HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd,
+                                           HAL_HCD_CallbackIDTypeDef CallbackID,
+                                           pHCD_CallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd,
+                                             HAL_HCD_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd,
+                                                             pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd);
+#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
+                                           uint8_t direction, uint8_t ep_type,
+                                           uint8_t token, uint8_t *pbuff,
+                                           uint16_t length, uint8_t do_ping);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_WKUP_IRQHandler(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum,
+                                         HCD_URBStateTypeDef urb_state);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+HCD_StateTypeDef        HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef     HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef      HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t                HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t                HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t                HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HCD_Private_Macros HCD Private Macros
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private functions prototypes ----------------------------------------------*/
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+#endif /* defined (USB_OTG_FS) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h

@@ -0,0 +1,740 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_i2c.h
+  * @author  MCD Application Team
+  * @brief   Header file of I2C HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_I2C_H
+#define __STM32F1xx_HAL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2C
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+  * @{
+  */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+  * @brief  I2C Configuration Structure definition
+  * @{
+  */
+typedef struct
+{
+  uint32_t ClockSpeed;       /*!< Specifies the clock frequency.
+                                  This parameter must be set to a value lower than 400kHz */
+
+  uint32_t DutyCycle;        /*!< Specifies the I2C fast mode duty cycle.
+                                  This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+  uint32_t OwnAddress1;      /*!< Specifies the first device own address.
+                                  This parameter can be a 7-bit or 10-bit address. */
+
+  uint32_t AddressingMode;   /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_addressing_mode */
+
+  uint32_t DualAddressMode;  /*!< Specifies if dual addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+  uint32_t OwnAddress2;      /*!< Specifies the second device own address if dual addressing mode is selected
+                                  This parameter can be a 7-bit address. */
+
+  uint32_t GeneralCallMode;  /*!< Specifies if general call mode is selected.
+                                  This parameter can be a value of @ref I2C_general_call_addressing_mode */
+
+  uint32_t NoStretchMode;    /*!< Specifies if nostretch mode is selected.
+                                  This parameter can be a value of @ref I2C_nostretch_mode */
+
+} I2C_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+  * @brief  HAL State structure definition
+  * @note  HAL I2C State value coding follow below described bitmap :
+  *          b7-b6  Error information
+  *             00 : No Error
+  *             01 : Abort (Abort user request on going)
+  *             10 : Timeout
+  *             11 : Error
+  *          b5     Peripheral initialization status
+  *             0  : Reset (Peripheral not initialized)
+  *             1  : Init done (Peripheral initialized and ready to use. HAL I2C Init function called)
+  *          b4     (not used)
+  *             x  : Should be set to 0
+  *          b3
+  *             0  : Ready or Busy (No Listen mode ongoing)
+  *             1  : Listen (Peripheral in Address Listen Mode)
+  *          b2     Intrinsic process state
+  *             0  : Ready
+  *             1  : Busy (Peripheral busy with some configuration or internal operations)
+  *          b1     Rx state
+  *             0  : Ready (no Rx operation ongoing)
+  *             1  : Busy (Rx operation ongoing)
+  *          b0     Tx state
+  *             0  : Ready (no Tx operation ongoing)
+  *             1  : Busy (Tx operation ongoing)
+  * @{
+  */
+typedef enum
+{
+  HAL_I2C_STATE_RESET             = 0x00U,   /*!< Peripheral is not yet Initialized         */
+  HAL_I2C_STATE_READY             = 0x20U,   /*!< Peripheral Initialized and ready for use  */
+  HAL_I2C_STATE_BUSY              = 0x24U,   /*!< An internal process is ongoing            */
+  HAL_I2C_STATE_BUSY_TX           = 0x21U,   /*!< Data Transmission process is ongoing      */
+  HAL_I2C_STATE_BUSY_RX           = 0x22U,   /*!< Data Reception process is ongoing         */
+  HAL_I2C_STATE_LISTEN            = 0x28U,   /*!< Address Listen Mode is ongoing            */
+  HAL_I2C_STATE_BUSY_TX_LISTEN    = 0x29U,   /*!< Address Listen Mode and Data Transmission
+                                                 process is ongoing                         */
+  HAL_I2C_STATE_BUSY_RX_LISTEN    = 0x2AU,   /*!< Address Listen Mode and Data Reception
+                                                 process is ongoing                         */
+  HAL_I2C_STATE_ABORT             = 0x60U,   /*!< Abort user request ongoing                */
+  HAL_I2C_STATE_TIMEOUT           = 0xA0U,   /*!< Timeout state                             */
+  HAL_I2C_STATE_ERROR             = 0xE0U    /*!< Error                                     */
+
+} HAL_I2C_StateTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+  * @brief  HAL Mode structure definition
+  * @note  HAL I2C Mode value coding follow below described bitmap :\n
+  *          b7     (not used)\n
+  *             x  : Should be set to 0\n
+  *          b6\n
+  *             0  : None\n
+  *             1  : Memory (HAL I2C communication is in Memory Mode)\n
+  *          b5\n
+  *             0  : None\n
+  *             1  : Slave (HAL I2C communication is in Slave Mode)\n
+  *          b4\n
+  *             0  : None\n
+  *             1  : Master (HAL I2C communication is in Master Mode)\n
+  *          b3-b2-b1-b0  (not used)\n
+  *             xxxx : Should be set to 0000
+  * @{
+  */
+typedef enum
+{
+  HAL_I2C_MODE_NONE               = 0x00U,   /*!< No I2C communication on going             */
+  HAL_I2C_MODE_MASTER             = 0x10U,   /*!< I2C communication is in Master Mode       */
+  HAL_I2C_MODE_SLAVE              = 0x20U,   /*!< I2C communication is in Slave Mode        */
+  HAL_I2C_MODE_MEM                = 0x40U    /*!< I2C communication is in Memory Mode       */
+
+} HAL_I2C_ModeTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+  * @brief  I2C Error Code definition
+  * @{
+  */
+#define HAL_I2C_ERROR_NONE              0x00000000U    /*!< No error              */
+#define HAL_I2C_ERROR_BERR              0x00000001U    /*!< BERR error            */
+#define HAL_I2C_ERROR_ARLO              0x00000002U    /*!< ARLO error            */
+#define HAL_I2C_ERROR_AF                0x00000004U    /*!< AF error              */
+#define HAL_I2C_ERROR_OVR               0x00000008U    /*!< OVR error             */
+#define HAL_I2C_ERROR_DMA               0x00000010U    /*!< DMA transfer error    */
+#define HAL_I2C_ERROR_TIMEOUT           0x00000020U    /*!< Timeout Error         */
+#define HAL_I2C_ERROR_SIZE              0x00000040U    /*!< Size Management error */
+#define HAL_I2C_ERROR_DMA_PARAM         0x00000080U    /*!< DMA Parameter Error   */
+#define HAL_I2C_WRONG_START             0x00000200U    /*!< Wrong start Error     */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define HAL_I2C_ERROR_INVALID_CALLBACK  0x00000100U    /*!< Invalid Callback error */
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+  * @brief  I2C handle Structure definition
+  * @{
+  */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+typedef struct __I2C_HandleTypeDef
+#else
+typedef struct
+#endif  /* USE_HAL_I2C_REGISTER_CALLBACKS */
+{
+  I2C_TypeDef                *Instance;      /*!< I2C registers base address               */
+
+  I2C_InitTypeDef            Init;           /*!< I2C communication parameters             */
+
+  uint8_t                    *pBuffPtr;      /*!< Pointer to I2C transfer buffer           */
+
+  uint16_t                   XferSize;       /*!< I2C transfer size                        */
+
+  __IO uint16_t              XferCount;      /*!< I2C transfer counter                     */
+
+  __IO uint32_t              XferOptions;    /*!< I2C transfer options                     */
+
+  __IO uint32_t              PreviousState;  /*!< I2C communication Previous state and mode
+                                                  context for internal usage               */
+
+  DMA_HandleTypeDef          *hdmatx;        /*!< I2C Tx DMA handle parameters             */
+
+  DMA_HandleTypeDef          *hdmarx;        /*!< I2C Rx DMA handle parameters             */
+
+  HAL_LockTypeDef            Lock;           /*!< I2C locking object                       */
+
+  __IO HAL_I2C_StateTypeDef  State;          /*!< I2C communication state                  */
+
+  __IO HAL_I2C_ModeTypeDef   Mode;           /*!< I2C communication mode                   */
+
+  __IO uint32_t              ErrorCode;      /*!< I2C Error code                           */
+
+  __IO uint32_t              Devaddress;     /*!< I2C Target device address                */
+
+  __IO uint32_t              Memaddress;     /*!< I2C Target memory address                */
+
+  __IO uint32_t              MemaddSize;     /*!< I2C Target memory address  size          */
+
+  __IO uint32_t              EventCount;     /*!< I2C Event counter                        */
+
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+  void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Tx Transfer completed callback */
+  void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Rx Transfer completed callback */
+  void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Tx Transfer completed callback  */
+  void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Rx Transfer completed callback  */
+  void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);             /*!< I2C Listen Complete callback              */
+  void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Tx Transfer completed callback */
+  void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Rx Transfer completed callback */
+  void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);                  /*!< I2C Error callback                        */
+  void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Abort callback                        */
+
+  void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);  /*!< I2C Slave Address Match callback */
+
+  void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);                /*!< I2C Msp Init callback                     */
+  void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Msp DeInit callback                   */
+
+#endif  /* USE_HAL_I2C_REGISTER_CALLBACKS */
+} I2C_HandleTypeDef;
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL I2C Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_I2C_MASTER_TX_COMPLETE_CB_ID      = 0x00U,    /*!< I2C Master Tx Transfer completed callback ID  */
+  HAL_I2C_MASTER_RX_COMPLETE_CB_ID      = 0x01U,    /*!< I2C Master Rx Transfer completed callback ID  */
+  HAL_I2C_SLAVE_TX_COMPLETE_CB_ID       = 0x02U,    /*!< I2C Slave Tx Transfer completed callback ID   */
+  HAL_I2C_SLAVE_RX_COMPLETE_CB_ID       = 0x03U,    /*!< I2C Slave Rx Transfer completed callback ID   */
+  HAL_I2C_LISTEN_COMPLETE_CB_ID         = 0x04U,    /*!< I2C Listen Complete callback ID               */
+  HAL_I2C_MEM_TX_COMPLETE_CB_ID         = 0x05U,    /*!< I2C Memory Tx Transfer callback ID            */
+  HAL_I2C_MEM_RX_COMPLETE_CB_ID         = 0x06U,    /*!< I2C Memory Rx Transfer completed callback ID  */
+  HAL_I2C_ERROR_CB_ID                   = 0x07U,    /*!< I2C Error callback ID                         */
+  HAL_I2C_ABORT_CB_ID                   = 0x08U,    /*!< I2C Abort callback ID                         */
+
+  HAL_I2C_MSPINIT_CB_ID                 = 0x09U,    /*!< I2C Msp Init callback ID                      */
+  HAL_I2C_MSPDEINIT_CB_ID               = 0x0AU     /*!< I2C Msp DeInit callback ID                    */
+
+} HAL_I2C_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL I2C Callback pointer definition
+  */
+typedef  void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
+typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
+
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+  * @{
+  */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
+  * @{
+  */
+#define I2C_DUTYCYCLE_2                 0x00000000U
+#define I2C_DUTYCYCLE_16_9              I2C_CCR_DUTY
+/**
+  * @}
+  */
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+  * @{
+  */
+#define I2C_ADDRESSINGMODE_7BIT         0x00004000U
+#define I2C_ADDRESSINGMODE_10BIT        (I2C_OAR1_ADDMODE | 0x00004000U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_dual_addressing_mode  I2C dual addressing mode
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLE        0x00000000U
+#define I2C_DUALADDRESS_ENABLE         I2C_OAR2_ENDUAL
+/**
+  * @}
+  */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+  * @{
+  */
+#define I2C_GENERALCALL_DISABLE        0x00000000U
+#define I2C_GENERALCALL_ENABLE         I2C_CR1_ENGC
+/**
+  * @}
+  */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+  * @{
+  */
+#define I2C_NOSTRETCH_DISABLE          0x00000000U
+#define I2C_NOSTRETCH_ENABLE           I2C_CR1_NOSTRETCH
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+  * @{
+  */
+#define I2C_MEMADD_SIZE_8BIT            0x00000001U
+#define I2C_MEMADD_SIZE_16BIT           0x00000010U
+/**
+  * @}
+  */
+
+/** @defgroup I2C_XferDirection_definition I2C XferDirection definition
+  * @{
+  */
+#define I2C_DIRECTION_RECEIVE           0x00000000U
+#define I2C_DIRECTION_TRANSMIT          0x00000001U
+/**
+  * @}
+  */
+
+/** @defgroup I2C_XferOptions_definition I2C XferOptions definition
+  * @{
+  */
+#define  I2C_FIRST_FRAME                0x00000001U
+#define  I2C_FIRST_AND_NEXT_FRAME       0x00000002U
+#define  I2C_NEXT_FRAME                 0x00000004U
+#define  I2C_FIRST_AND_LAST_FRAME       0x00000008U
+#define  I2C_LAST_FRAME_NO_STOP         0x00000010U
+#define  I2C_LAST_FRAME                 0x00000020U
+
+/* List of XferOptions in usage of :
+ * 1- Restart condition in all use cases (direction change or not)
+ */
+#define  I2C_OTHER_FRAME                (0x00AA0000U)
+#define  I2C_OTHER_AND_LAST_FRAME       (0xAA000000U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+  * @brief I2C Interrupt definition
+  *        Elements values convention: 0xXXXXXXXX
+  *           - XXXXXXXX  : Interrupt control mask
+  * @{
+  */
+#define I2C_IT_BUF                      I2C_CR2_ITBUFEN
+#define I2C_IT_EVT                      I2C_CR2_ITEVTEN
+#define I2C_IT_ERR                      I2C_CR2_ITERREN
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+  * @{
+  */
+
+#define I2C_FLAG_OVR                    0x00010800U
+#define I2C_FLAG_AF                     0x00010400U
+#define I2C_FLAG_ARLO                   0x00010200U
+#define I2C_FLAG_BERR                   0x00010100U
+#define I2C_FLAG_TXE                    0x00010080U
+#define I2C_FLAG_RXNE                   0x00010040U
+#define I2C_FLAG_STOPF                  0x00010010U
+#define I2C_FLAG_ADD10                  0x00010008U
+#define I2C_FLAG_BTF                    0x00010004U
+#define I2C_FLAG_ADDR                   0x00010002U
+#define I2C_FLAG_SB                     0x00010001U
+#define I2C_FLAG_DUALF                  0x00100080U
+#define I2C_FLAG_GENCALL                0x00100010U
+#define I2C_FLAG_TRA                    0x00100004U
+#define I2C_FLAG_BUSY                   0x00100002U
+#define I2C_FLAG_MSL                    0x00100001U
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+  * @{
+  */
+
+/** @brief Reset I2C handle state.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                do{                                                   \
+                                                                    (__HANDLE__)->State = HAL_I2C_STATE_RESET;       \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                                  } while(0)
+#else
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+#endif
+
+/** @brief  Enable or disable the specified I2C interrupts.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg I2C_IT_BUF: Buffer interrupt enable
+  *            @arg I2C_IT_EVT: Event interrupt enable
+  *            @arg I2C_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)   SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)  CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief  Checks if the specified I2C interrupt source is enabled or disabled.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __INTERRUPT__ specifies the I2C interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg I2C_IT_BUF: Buffer interrupt enable
+  *            @arg I2C_IT_EVT: Event interrupt enable
+  *            @arg I2C_IT_ERR: Error interrupt enable
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified I2C flag is set or not.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2C_FLAG_OVR: Overrun/Underrun flag
+  *            @arg I2C_FLAG_AF: Acknowledge failure flag
+  *            @arg I2C_FLAG_ARLO: Arbitration lost flag
+  *            @arg I2C_FLAG_BERR: Bus error flag
+  *            @arg I2C_FLAG_TXE: Data register empty flag
+  *            @arg I2C_FLAG_RXNE: Data register not empty flag
+  *            @arg I2C_FLAG_STOPF: Stop detection flag
+  *            @arg I2C_FLAG_ADD10: 10-bit header sent flag
+  *            @arg I2C_FLAG_BTF: Byte transfer finished flag
+  *            @arg I2C_FLAG_ADDR: Address sent flag
+  *                                Address matched flag
+  *            @arg I2C_FLAG_SB: Start bit flag
+  *            @arg I2C_FLAG_DUALF: Dual flag
+  *            @arg I2C_FLAG_GENCALL: General call header flag
+  *            @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+  *            @arg I2C_FLAG_BUSY: Bus busy flag
+  *            @arg I2C_FLAG_MSL: Master/Slave flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U) ? \
+                                                  (((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) : \
+                                                  (((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET))
+
+/** @brief  Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __FLAG__ specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+  *            @arg I2C_FLAG_AF: Acknowledge failure flag
+  *            @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+  *            @arg I2C_FLAG_BERR: Bus error flag
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
+
+/** @brief  Clears the I2C ADDR pending flag.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__)    \
+  do{                                           \
+    __IO uint32_t tmpreg = 0x00U;               \
+    tmpreg = (__HANDLE__)->Instance->SR1;       \
+    tmpreg = (__HANDLE__)->Instance->SR2;       \
+    UNUSED(tmpreg);                             \
+  } while(0)
+
+/** @brief  Clears the I2C STOPF pending flag.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__)           \
+  do{                                                  \
+    __IO uint32_t tmpreg = 0x00U;                      \
+    tmpreg = (__HANDLE__)->Instance->SR1;              \
+    SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE);  \
+    UNUSED(tmpreg);                                    \
+  } while(0)
+
+/** @brief  Enable the specified I2C peripheral.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_ENABLE(__HANDLE__)                  SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
+
+/** @brief  Disable the specified I2C peripheral.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_DISABLE(__HANDLE__)                 CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+/* IO operation functions  ****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+  * @{
+  */
+/* Peripheral State, Mode and Error functions  *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+  * @{
+  */
+#define I2C_FLAG_MASK                    0x0000FFFFU
+#define I2C_MIN_PCLK_FREQ_STANDARD       2000000U     /*!< 2 MHz                     */
+#define I2C_MIN_PCLK_FREQ_FAST           4000000U     /*!< 4 MHz                     */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macros I2C Private Macros
+  * @{
+  */
+
+#define I2C_MIN_PCLK_FREQ(__PCLK__, __SPEED__)             (((__SPEED__) <= 100000U) ? ((__PCLK__) < I2C_MIN_PCLK_FREQ_STANDARD) : ((__PCLK__) < I2C_MIN_PCLK_FREQ_FAST))
+#define I2C_CCR_CALCULATION(__PCLK__, __SPEED__, __COEFF__)     (((((__PCLK__) - 1U)/((__SPEED__) * (__COEFF__))) + 1U) & I2C_CCR_CCR)
+#define I2C_FREQRANGE(__PCLK__)                            ((__PCLK__)/1000000U)
+#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__)            (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
+#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__)            ((I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U) < 4U)? 4U:I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U))
+#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 3U) : (I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 25U) | I2C_DUTYCYCLE_16_9))
+#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__)      (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
+                                                                  ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
+                                                                  ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
+
+#define I2C_7BIT_ADD_WRITE(__ADDRESS__)                    ((uint8_t)((__ADDRESS__) & (uint8_t)(~I2C_OAR1_ADD0)))
+#define I2C_7BIT_ADD_READ(__ADDRESS__)                     ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
+
+#define I2C_10BIT_ADDRESS(__ADDRESS__)                     ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
+#define I2C_10BIT_HEADER_WRITE(__ADDRESS__)                ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)0x00F0)))
+#define I2C_10BIT_HEADER_READ(__ADDRESS__)                 ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)(0x00F1))))
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__)                       ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0xFF00)) >> 8)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__)                       ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
+
+/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
+  * @{
+  */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
+                                  ((CYCLE) == I2C_DUTYCYCLE_16_9))
+#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
+                                         ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+                                      ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+                                   ((CALL) == I2C_GENERALCALL_ENABLE))
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+                                    ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+                                  ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0U) && ((SPEED) <= 400000U))
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & 0xFFFFFC00U) == 0U)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & 0xFFFFFF01U) == 0U)
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST)      (((REQUEST) == I2C_FIRST_FRAME)              || \
+                                                       ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME)     || \
+                                                       ((REQUEST) == I2C_NEXT_FRAME)               || \
+                                                       ((REQUEST) == I2C_FIRST_AND_LAST_FRAME)     || \
+                                                       ((REQUEST) == I2C_LAST_FRAME)               || \
+                                                       ((REQUEST) == I2C_LAST_FRAME_NO_STOP)       || \
+                                                       IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
+
+#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME)     || \
+                                                        ((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
+
+#define I2C_CHECK_FLAG(__ISR__, __FLAG__)         ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
+#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__)      ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F1xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2s.h

@@ -0,0 +1,556 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_i2s.h
+  * @author  MCD Application Team
+  * @brief   Header file of I2S HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_I2S_H
+#define STM32F1xx_HAL_I2S_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+#if defined(SPI_I2S_SUPPORT)
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2S
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+  * @{
+  */
+
+/**
+  * @brief I2S Init structure definition
+  */
+typedef struct
+{
+  uint32_t Mode;                /*!< Specifies the I2S operating mode.
+                                     This parameter can be a value of @ref I2S_Mode */
+
+  uint32_t Standard;            /*!< Specifies the standard used for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Standard */
+
+  uint32_t DataFormat;          /*!< Specifies the data format for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Data_Format */
+
+  uint32_t MCLKOutput;          /*!< Specifies whether the I2S MCLK output is enabled or not.
+                                     This parameter can be a value of @ref I2S_MCLK_Output */
+
+  uint32_t AudioFreq;           /*!< Specifies the frequency selected for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Audio_Frequency */
+
+  uint32_t CPOL;                /*!< Specifies the idle state of the I2S clock.
+                                     This parameter can be a value of @ref I2S_Clock_Polarity */
+} I2S_InitTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_I2S_STATE_RESET      = 0x00U,  /*!< I2S not yet initialized or disabled                */
+  HAL_I2S_STATE_READY      = 0x01U,  /*!< I2S initialized and ready for use                  */
+  HAL_I2S_STATE_BUSY       = 0x02U,  /*!< I2S internal process is ongoing                    */
+  HAL_I2S_STATE_BUSY_TX    = 0x03U,  /*!< Data Transmission process is ongoing               */
+  HAL_I2S_STATE_BUSY_RX    = 0x04U,  /*!< Data Reception process is ongoing                  */
+  HAL_I2S_STATE_TIMEOUT    = 0x06U,  /*!< I2S timeout state                                  */
+  HAL_I2S_STATE_ERROR      = 0x07U   /*!< I2S error state                                    */
+} HAL_I2S_StateTypeDef;
+
+/**
+  * @brief I2S handle Structure definition
+  */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1)
+typedef struct __I2S_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+{
+  SPI_TypeDef                *Instance;    /*!< I2S registers base address */
+
+  I2S_InitTypeDef            Init;         /*!< I2S communication parameters */
+
+  uint16_t                   *pTxBuffPtr;  /*!< Pointer to I2S Tx transfer buffer */
+
+  __IO uint16_t              TxXferSize;   /*!< I2S Tx transfer size */
+
+  __IO uint16_t              TxXferCount;  /*!< I2S Tx transfer Counter */
+
+  uint16_t                   *pRxBuffPtr;  /*!< Pointer to I2S Rx transfer buffer */
+
+  __IO uint16_t              RxXferSize;   /*!< I2S Rx transfer size */
+
+  __IO uint16_t              RxXferCount;  /*!< I2S Rx transfer counter
+                                              (This field is initialized at the
+                                               same value as transfer size at the
+                                               beginning of the transfer and
+                                               decremented when a sample is received
+                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */
+  DMA_HandleTypeDef          *hdmatx;      /*!< I2S Tx DMA handle parameters */
+
+  DMA_HandleTypeDef          *hdmarx;      /*!< I2S Rx DMA handle parameters */
+
+  __IO HAL_LockTypeDef       Lock;         /*!< I2S locking object */
+
+  __IO HAL_I2S_StateTypeDef  State;        /*!< I2S communication state */
+
+  __IO uint32_t              ErrorCode;    /*!< I2S Error code
+                                                This parameter can be a value of @ref I2S_Error */
+
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+  void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s);             /*!< I2S Tx Completed callback          */
+  void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s);             /*!< I2S Rx Completed callback          */
+  void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s);         /*!< I2S Tx Half Completed callback     */
+  void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s);         /*!< I2S Rx Half Completed callback     */
+  void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s);              /*!< I2S Error callback                 */
+  void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s);            /*!< I2S Msp Init callback              */
+  void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s);          /*!< I2S Msp DeInit callback            */
+
+#endif  /* USE_HAL_I2S_REGISTER_CALLBACKS */
+} I2S_HandleTypeDef;
+
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+/**
+  * @brief  HAL I2S Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_I2S_TX_COMPLETE_CB_ID             = 0x00U,    /*!< I2S Tx Completed callback ID         */
+  HAL_I2S_RX_COMPLETE_CB_ID             = 0x01U,    /*!< I2S Rx Completed callback ID         */
+  HAL_I2S_TX_HALF_COMPLETE_CB_ID        = 0x03U,    /*!< I2S Tx Half Completed callback ID    */
+  HAL_I2S_RX_HALF_COMPLETE_CB_ID        = 0x04U,    /*!< I2S Rx Half Completed callback ID    */
+  HAL_I2S_ERROR_CB_ID                   = 0x06U,    /*!< I2S Error callback ID                */
+  HAL_I2S_MSPINIT_CB_ID                 = 0x07U,    /*!< I2S Msp Init callback ID             */
+  HAL_I2S_MSPDEINIT_CB_ID               = 0x08U     /*!< I2S Msp DeInit callback ID           */
+
+} HAL_I2S_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL I2S Callback pointer definition
+  */
+typedef  void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */
+
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+  * @{
+  */
+/** @defgroup I2S_Error I2S Error
+  * @{
+  */
+#define HAL_I2S_ERROR_NONE               (0x00000000U)  /*!< No error                    */
+#define HAL_I2S_ERROR_TIMEOUT            (0x00000001U)  /*!< Timeout error               */
+#define HAL_I2S_ERROR_OVR                (0x00000002U)  /*!< OVR error                   */
+#define HAL_I2S_ERROR_UDR                (0x00000004U)  /*!< UDR error                   */
+#define HAL_I2S_ERROR_DMA                (0x00000008U)  /*!< DMA transfer error          */
+#define HAL_I2S_ERROR_PRESCALER          (0x00000010U)  /*!< Prescaler Calculation error */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+#define HAL_I2S_ERROR_INVALID_CALLBACK   (0x00000020U)  /*!< Invalid Callback error      */
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+#define HAL_I2S_ERROR_BUSY_LINE_RX       (0x00000040U)  /*!< Busy Rx Line error          */
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Mode I2S Mode
+  * @{
+  */
+#define I2S_MODE_SLAVE_TX                (0x00000000U)
+#define I2S_MODE_SLAVE_RX                (SPI_I2SCFGR_I2SCFG_0)
+#define I2S_MODE_MASTER_TX               (SPI_I2SCFGR_I2SCFG_1)
+#define I2S_MODE_MASTER_RX               ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Standard I2S Standard
+  * @{
+  */
+#define I2S_STANDARD_PHILIPS             (0x00000000U)
+#define I2S_STANDARD_MSB                 (SPI_I2SCFGR_I2SSTD_0)
+#define I2S_STANDARD_LSB                 (SPI_I2SCFGR_I2SSTD_1)
+#define I2S_STANDARD_PCM_SHORT           ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1))
+#define I2S_STANDARD_PCM_LONG            ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+  * @{
+  */
+#define I2S_DATAFORMAT_16B               (0x00000000U)
+#define I2S_DATAFORMAT_16B_EXTENDED      (SPI_I2SCFGR_CHLEN)
+#define I2S_DATAFORMAT_24B               ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0))
+#define I2S_DATAFORMAT_32B               ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_MCLK_Output I2S MCLK Output
+  * @{
+  */
+#define I2S_MCLKOUTPUT_ENABLE            (SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE           (0x00000000U)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+  * @{
+  */
+#define I2S_AUDIOFREQ_192K               (192000U)
+#define I2S_AUDIOFREQ_96K                (96000U)
+#define I2S_AUDIOFREQ_48K                (48000U)
+#define I2S_AUDIOFREQ_44K                (44100U)
+#define I2S_AUDIOFREQ_32K                (32000U)
+#define I2S_AUDIOFREQ_22K                (22050U)
+#define I2S_AUDIOFREQ_16K                (16000U)
+#define I2S_AUDIOFREQ_11K                (11025U)
+#define I2S_AUDIOFREQ_8K                 (8000U)
+#define I2S_AUDIOFREQ_DEFAULT            (2U)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+  * @{
+  */
+#define I2S_CPOL_LOW                     (0x00000000U)
+#define I2S_CPOL_HIGH                    (SPI_I2SCFGR_CKPOL)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+  * @{
+  */
+#define I2S_IT_TXE                       SPI_CR2_TXEIE
+#define I2S_IT_RXNE                      SPI_CR2_RXNEIE
+#define I2S_IT_ERR                       SPI_CR2_ERRIE
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
+  * @{
+  */
+#define I2S_FLAG_TXE                     SPI_SR_TXE
+#define I2S_FLAG_RXNE                    SPI_SR_RXNE
+
+#define I2S_FLAG_UDR                     SPI_SR_UDR
+#define I2S_FLAG_OVR                     SPI_SR_OVR
+#define I2S_FLAG_FRE                     SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE                  SPI_SR_CHSIDE
+#define I2S_FLAG_BSY                     SPI_SR_BSY
+
+#define I2S_FLAG_MASK                   (SPI_SR_RXNE\
+                                         | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_CHSIDE | SPI_SR_BSY)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup I2S_Exported_macros I2S Exported Macros
+  * @{
+  */
+
+/** @brief  Reset I2S handle state
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__)                do{                                                  \
+                                                                    (__HANDLE__)->State = HAL_I2S_STATE_RESET;       \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                                  } while(0)
+#else
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+
+/** @brief  Enable the specified SPI peripheral (in I2S mode).
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_ENABLE(__HANDLE__)    (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
+
+/** @brief  Disable the specified SPI peripheral (in I2S mode).
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
+
+/** @brief  Enable the specified I2S interrupts.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__)    (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
+
+/** @brief  Disable the specified I2S interrupts.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
+
+/** @brief  Checks if the specified I2S interrupt source is enabled or disabled.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+  * @param  __INTERRUPT__ specifies the I2S interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
+                                                              & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified I2S flag is set or not.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
+  *            @arg I2S_FLAG_UDR: Underrun flag
+  *            @arg I2S_FLAG_OVR: Overrun flag
+  *            @arg I2S_FLAG_FRE: Frame error flag
+  *            @arg I2S_FLAG_CHSIDE: Channel Side flag
+  *            @arg I2S_FLAG_BSY: Busy flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \
+                                                __IO uint32_t tmpreg_ovr = 0x00U; \
+                                                tmpreg_ovr = (__HANDLE__)->Instance->DR; \
+                                                tmpreg_ovr = (__HANDLE__)->Instance->SR; \
+                                                UNUSED(tmpreg_ovr); \
+                                              }while(0U)
+/** @brief Clears the I2S UDR pending flag.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\
+                                                __IO uint32_t tmpreg_udr = 0x00U;\
+                                                tmpreg_udr = ((__HANDLE__)->Instance->SR);\
+                                                UNUSED(tmpreg_udr); \
+                                              }while(0U)
+/** @brief Flush the I2S DR Register.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_FLUSH_RX_DR(__HANDLE__)  do{\
+                                                __IO uint32_t tmpreg_dr = 0x00U;\
+                                                tmpreg_dr = ((__HANDLE__)->Instance->DR);\
+                                                UNUSED(tmpreg_dr); \
+                                              }while(0U)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID,
+                                           pI2S_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control and State functions  ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+  * @{
+  */
+
+/** @brief  Check whether the specified SPI flag is set or not.
+  * @param  __SR__  copy of I2S SR register.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
+  *            @arg I2S_FLAG_UDR: Underrun error flag
+  *            @arg I2S_FLAG_OVR: Overrun flag
+  *            @arg I2S_FLAG_CHSIDE: Channel side flag
+  *            @arg I2S_FLAG_BSY: Busy flag
+  * @retval SET or RESET.
+  */
+#define I2S_CHECK_FLAG(__SR__, __FLAG__)         ((((__SR__)\
+                                                    & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET)
+
+/** @brief  Check whether the specified SPI Interrupt is set or not.
+  * @param  __CR2__  copy of I2S CR2 register.
+  * @param  __INTERRUPT__ specifies the SPI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval SET or RESET.
+  */
+#define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__)      ((((__CR2__)\
+                                                            & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks if I2S Mode parameter is in allowed range.
+  * @param  __MODE__ specifies the I2S Mode.
+  *         This parameter can be a value of @ref I2S_Mode
+  * @retval None
+  */
+#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX)  || \
+                               ((__MODE__) == I2S_MODE_SLAVE_RX)  || \
+                               ((__MODE__) == I2S_MODE_MASTER_TX) || \
+                               ((__MODE__) == I2S_MODE_MASTER_RX))
+
+#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS)   || \
+                                       ((__STANDARD__) == I2S_STANDARD_MSB)       || \
+                                       ((__STANDARD__) == I2S_STANDARD_LSB)       || \
+                                       ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \
+                                       ((__STANDARD__) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B)          || \
+                                        ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \
+                                        ((__FORMAT__) == I2S_DATAFORMAT_24B)          || \
+                                        ((__FORMAT__) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \
+                                        ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE))
+
+#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K)    && \
+                                      ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \
+                                     ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT))
+
+/** @brief  Checks if I2S Serial clock steady state parameter is in allowed range.
+  * @param  __CPOL__ specifies the I2S serial clock steady state.
+  *         This parameter can be a value of @ref I2S_Clock_Polarity
+  * @retval None
+  */
+#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \
+                               ((__CPOL__) == I2S_CPOL_HIGH))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* SPI_I2S_SUPPORT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_irda.h

@@ -0,0 +1,672 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_irda.h
+  * @author  MCD Application Team
+  * @brief   Header file of IRDA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_IRDA_H
+#define __STM32F1xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup IRDA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+  * @{
+  */
+/**
+  * @brief IRDA Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the IRDA communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                           - IntegerDivider = ((PCLKx) / (16 * (hirda->Init.BaudRate)))
+                                           - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref IRDA_Word_Length */
+
+  uint32_t Parity;                    /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref IRDA_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref IRDA_Mode */
+
+  uint8_t  Prescaler;                 /*!< Specifies the Prescaler value to be programmed
+                                           in the IrDA low-power Baud Register, for defining pulse width on which
+                                           burst acceptance/rejection will be decided. This value is used as divisor
+                                           of system clock to achieve required pulse width. */
+
+  uint32_t IrDAMode;                  /*!< Specifies the IrDA mode
+                                           This parameter can be a value of @ref IRDA_Low_Power */
+} IRDA_InitTypeDef;
+
+/**
+  * @brief HAL IRDA State structures definition
+  * @note  HAL IRDA State value is a combination of 2 different substates: gState and RxState.
+  *        - gState contains IRDA state information related to global Handle management
+  *          and also information related to Tx operations.
+  *          gState value coding follow below described bitmap :
+  *          b7-b6  Error information
+  *             00 : No Error
+  *             01 : (Not Used)
+  *             10 : Timeout
+  *             11 : Error
+  *          b5     IP initialisation status
+  *             0  : Reset (IP not initialized)
+  *             1  : Init done (IP initialized. HAL IRDA Init function already called)
+  *          b4-b3  (not used)
+  *             xx : Should be set to 00
+  *          b2     Intrinsic process state
+  *             0  : Ready
+  *             1  : Busy (IP busy with some configuration or internal operations)
+  *          b1     (not used)
+  *             x  : Should be set to 0
+  *          b0     Tx state
+  *             0  : Ready (no Tx operation ongoing)
+  *             1  : Busy (Tx operation ongoing)
+  *        - RxState contains information related to Rx operations.
+  *          RxState value coding follow below described bitmap :
+  *          b7-b6  (not used)
+  *             xx : Should be set to 00
+  *          b5     IP initialisation status
+  *             0  : Reset (IP not initialized)
+  *             1  : Init done (IP initialized)
+  *          b4-b2  (not used)
+  *            xxx : Should be set to 000
+  *          b1     Rx state
+  *             0  : Ready (no Rx operation ongoing)
+  *             1  : Busy (Rx operation ongoing)
+  *          b0     (not used)
+  *             x  : Should be set to 0.
+  */
+typedef enum
+{
+  HAL_IRDA_STATE_RESET             = 0x00U,    /*!< Peripheral is not yet Initialized
+                                                   Value is allowed for gState and RxState */
+  HAL_IRDA_STATE_READY             = 0x20U,    /*!< Peripheral Initialized and ready for use
+                                                   Value is allowed for gState and RxState */
+  HAL_IRDA_STATE_BUSY              = 0x24U,    /*!< An internal process is ongoing
+                                                   Value is allowed for gState only */
+  HAL_IRDA_STATE_BUSY_TX           = 0x21U,    /*!< Data Transmission process is ongoing
+                                                   Value is allowed for gState only */
+  HAL_IRDA_STATE_BUSY_RX           = 0x22U,    /*!< Data Reception process is ongoing
+                                                   Value is allowed for RxState only */
+  HAL_IRDA_STATE_BUSY_TX_RX        = 0x23U,    /*!< Data Transmission and Reception process is ongoing
+                                                   Not to be used for neither gState nor RxState.
+                                                   Value is result of combination (Or) between gState and RxState values */
+  HAL_IRDA_STATE_TIMEOUT           = 0xA0U,    /*!< Timeout state
+                                                   Value is allowed for gState only */
+  HAL_IRDA_STATE_ERROR             = 0xE0U     /*!< Error
+                                                   Value is allowed for gState only */
+} HAL_IRDA_StateTypeDef;
+
+/**
+  * @brief IRDA handle Structure definition
+  */
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+typedef struct __IRDA_HandleTypeDef
+#else
+typedef struct
+#endif  /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+{
+  USART_TypeDef               *Instance;        /*!<  USART registers base address       */
+
+  IRDA_InitTypeDef            Init;             /*!<  IRDA communication parameters      */
+
+  uint8_t                     *pTxBuffPtr;      /*!<  Pointer to IRDA Tx transfer Buffer */
+
+  uint16_t                    TxXferSize;       /*!<  IRDA Tx Transfer size              */
+
+  __IO uint16_t               TxXferCount;      /*!<  IRDA Tx Transfer Counter           */
+
+  uint8_t                     *pRxBuffPtr;      /*!<  Pointer to IRDA Rx transfer Buffer */
+
+  uint16_t                    RxXferSize;       /*!<  IRDA Rx Transfer size              */
+
+  __IO uint16_t               RxXferCount;      /*!<  IRDA Rx Transfer Counter           */
+
+  DMA_HandleTypeDef           *hdmatx;          /*!<  IRDA Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef           *hdmarx;          /*!<  IRDA Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef             Lock;             /*!<  Locking object                     */
+
+  __IO HAL_IRDA_StateTypeDef  gState;           /*!<  IRDA state information related to global Handle management
+                                                   and also related to Tx operations.
+                                                   This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+  __IO HAL_IRDA_StateTypeDef  RxState;          /*!<  IRDA state information related to Rx operations.
+                                                   This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+  __IO uint32_t               ErrorCode;        /*!< IRDA Error code                    */
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+  void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda);        /*!< IRDA Tx Half Complete Callback        */
+
+  void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda);            /*!< IRDA Tx Complete Callback             */
+
+  void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda);        /*!< IRDA Rx Half Complete Callback        */
+
+  void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda);            /*!< IRDA Rx Complete Callback             */
+
+  void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda);             /*!< IRDA Error Callback                   */
+
+  void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda);         /*!< IRDA Abort Complete Callback          */
+
+  void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */
+
+  void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda);  /*!< IRDA Abort Receive Complete Callback  */
+
+
+  void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda);           /*!< IRDA Msp Init callback                */
+
+  void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda);         /*!< IRDA Msp DeInit callback              */
+#endif  /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+} IRDA_HandleTypeDef;
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL IRDA Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_IRDA_TX_HALFCOMPLETE_CB_ID         = 0x00U,    /*!< IRDA Tx Half Complete Callback ID        */
+  HAL_IRDA_TX_COMPLETE_CB_ID             = 0x01U,    /*!< IRDA Tx Complete Callback ID             */
+  HAL_IRDA_RX_HALFCOMPLETE_CB_ID         = 0x02U,    /*!< IRDA Rx Half Complete Callback ID        */
+  HAL_IRDA_RX_COMPLETE_CB_ID             = 0x03U,    /*!< IRDA Rx Complete Callback ID             */
+  HAL_IRDA_ERROR_CB_ID                   = 0x04U,    /*!< IRDA Error Callback ID                   */
+  HAL_IRDA_ABORT_COMPLETE_CB_ID          = 0x05U,    /*!< IRDA Abort Complete Callback ID          */
+  HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U,    /*!< IRDA Abort Transmit Complete Callback ID */
+  HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID  = 0x07U,    /*!< IRDA Abort Receive Complete Callback ID  */
+
+  HAL_IRDA_MSPINIT_CB_ID                 = 0x08U,    /*!< IRDA MspInit callback ID                 */
+  HAL_IRDA_MSPDEINIT_CB_ID               = 0x09U     /*!< IRDA MspDeInit callback ID               */
+
+} HAL_IRDA_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL IRDA Callback pointer definition
+  */
+typedef  void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda);  /*!< pointer to an IRDA callback function */
+
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+  * @{
+  */
+/** @defgroup IRDA_Error_Code IRDA Error Code
+  * @{
+  */
+#define HAL_IRDA_ERROR_NONE        0x00000000U   /*!< No error            */
+#define HAL_IRDA_ERROR_PE          0x00000001U   /*!< Parity error        */
+#define HAL_IRDA_ERROR_NE          0x00000002U   /*!< Noise error         */
+#define HAL_IRDA_ERROR_FE          0x00000004U   /*!< Frame error         */
+#define HAL_IRDA_ERROR_ORE         0x00000008U   /*!< Overrun error       */
+#define HAL_IRDA_ERROR_DMA         0x00000010U   /*!< DMA transfer error  */
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+#define HAL_IRDA_ERROR_INVALID_CALLBACK   ((uint32_t)0x00000020U)   /*!< Invalid Callback error  */
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Word_Length IRDA Word Length
+  * @{
+  */
+#define IRDA_WORDLENGTH_8B         0x00000000U
+#define IRDA_WORDLENGTH_9B         ((uint32_t)USART_CR1_M)
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Parity  IRDA Parity
+  * @{
+  */
+#define IRDA_PARITY_NONE           0x00000000U
+#define IRDA_PARITY_EVEN           ((uint32_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD            ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Mode IRDA Transfer Mode
+  * @{
+  */
+#define IRDA_MODE_RX               ((uint32_t)USART_CR1_RE)
+#define IRDA_MODE_TX               ((uint32_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX            ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+  * @{
+  */
+#define IRDA_POWERMODE_LOWPOWER    ((uint32_t)USART_CR3_IRLP)
+#define IRDA_POWERMODE_NORMAL      0x00000000U
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Flags IRDA Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the SR register
+  * @{
+  */
+#define IRDA_FLAG_TXE              ((uint32_t)USART_SR_TXE)
+#define IRDA_FLAG_TC               ((uint32_t)USART_SR_TC)
+#define IRDA_FLAG_RXNE             ((uint32_t)USART_SR_RXNE)
+#define IRDA_FLAG_IDLE             ((uint32_t)USART_SR_IDLE)
+#define IRDA_FLAG_ORE              ((uint32_t)USART_SR_ORE)
+#define IRDA_FLAG_NE               ((uint32_t)USART_SR_NE)
+#define IRDA_FLAG_FE               ((uint32_t)USART_SR_FE)
+#define IRDA_FLAG_PE               ((uint32_t)USART_SR_PE)
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions
+  *        Elements values convention: 0xY000XXXX
+  *           - XXXX  : Interrupt mask in the XX register
+  *           - Y  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  * @{
+  */
+#define IRDA_IT_PE                 ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define IRDA_IT_TXE                ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define IRDA_IT_TC                 ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define IRDA_IT_RXNE               ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define IRDA_IT_IDLE               ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define IRDA_IT_LBD                ((uint32_t)(IRDA_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define IRDA_IT_CTS                ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define IRDA_IT_ERR                ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+  * @{
+  */
+
+/** @brief Reset IRDA handle gstate & RxState
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__)  do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_IRDA_STATE_RESET;      \
+                                                       (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET;     \
+                                                       (__HANDLE__)->MspInitCallback = NULL;             \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;           \
+                                                     } while(0U)
+#else
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__)  do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_IRDA_STATE_RESET;      \
+                                                       (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET;     \
+                                                     } while(0U)
+#endif /*USE_HAL_IRDA_REGISTER_CALLBACKS  */
+
+/** @brief  Flush the IRDA DR register
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief  Check whether the specified IRDA flag is set or not.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __FLAG__ specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg IRDA_FLAG_TXE:  Transmit data register empty flag
+  *            @arg IRDA_FLAG_TC:   Transmission Complete flag
+  *            @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+  *            @arg IRDA_FLAG_IDLE: Idle Line detection flag
+  *            @arg IRDA_FLAG_ORE:  OverRun Error flag
+  *            @arg IRDA_FLAG_NE:   Noise Error flag
+  *            @arg IRDA_FLAG_FE:   Framing Error flag
+  *            @arg IRDA_FLAG_PE:   Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the specified IRDA pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __FLAG__ specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg IRDA_FLAG_TC:   Transmission Complete flag.
+  *            @arg IRDA_FLAG_RXNE: Receive data register not empty flag.
+  *
+  * @note   PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+  *          error) and IDLE (Idle line detected) flags are cleared by software
+  *          sequence: a read operation to USART_SR register followed by a read
+  *          operation to USART_DR register.
+  * @note   RXNE flag can be also cleared by a read to the USART_DR register.
+  * @note   TC flag can be also cleared by software sequence: a read operation to
+  *          USART_SR register followed by a write operation to USART_DR register.
+  * @note   TXE flag is cleared only by a write to the USART_DR register.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief  Clear the IRDA PE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)     \
+  do{                                           \
+    __IO uint32_t tmpreg = 0x00U;               \
+    tmpreg = (__HANDLE__)->Instance->SR;        \
+    tmpreg = (__HANDLE__)->Instance->DR;        \
+    UNUSED(tmpreg);                             \
+  } while(0U)
+
+/** @brief  Clear the IRDA FE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the IRDA NE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the IRDA ORE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the IRDA IDLE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Enable the specified IRDA interrupt.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __INTERRUPT__ specifies the IRDA interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:   Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg IRDA_IT_PE:   Parity Error interrupt
+  *            @arg IRDA_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((((__INTERRUPT__) >> 28U) == IRDA_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+                                                           (((__INTERRUPT__) >> 28U) == IRDA_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |=  ((__INTERRUPT__) & IRDA_IT_MASK)): \
+                                                            ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK)))
+/** @brief  Disable the specified IRDA interrupt.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __INTERRUPT__ specifies the IRDA interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:   Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg IRDA_IT_PE:   Parity Error interrupt
+  *            @arg IRDA_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((((__INTERRUPT__) >> 28U) == IRDA_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+                                                           (((__INTERRUPT__) >> 28U) == IRDA_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+                                                           ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK)))
+
+/** @brief  Check whether the specified IRDA interrupt has occurred or not.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __IT__ specifies the IRDA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:  Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg IRDA_IT_ERR: Error interrupt
+  *            @arg IRDA_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == IRDA_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == IRDA_CR2_REG_INDEX)? \
+                                                      (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK))
+
+/** @brief  Enable UART/USART associated to IRDA Handle
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_ENABLE(__HANDLE__)                   (SET_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE))
+
+/** @brief  Disable UART/USART associated to IRDA Handle
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_DISABLE(__HANDLE__)                  (CLEAR_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IRDA_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, pIRDA_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda);
+
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Constants IRDA Private Constants
+  * @{
+  */
+
+/** @brief IRDA interruptions flag mask
+  *
+  */
+#define IRDA_IT_MASK  ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+                                  USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+#define IRDA_CR1_REG_INDEX         1U
+#define IRDA_CR2_REG_INDEX         2U
+#define IRDA_CR3_REG_INDEX         3U
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup IRDA_Private_Macros   IRDA Private Macros
+  * @{
+  */
+#define IS_IRDA_WORD_LENGTH(LENGTH)   (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+                                       ((LENGTH) == IRDA_WORDLENGTH_9B))
+
+#define IS_IRDA_PARITY(PARITY)        (((PARITY) == IRDA_PARITY_NONE) || \
+                                       ((PARITY) == IRDA_PARITY_EVEN) || \
+                                       ((PARITY) == IRDA_PARITY_ODD))
+
+#define IS_IRDA_MODE(MODE)            ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00000000U))
+
+#define IS_IRDA_POWERMODE(MODE)       (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+                                       ((MODE) == IRDA_POWERMODE_NORMAL))
+
+#define IS_IRDA_BAUDRATE(BAUDRATE)    ((BAUDRATE) < 115201U)
+
+#define IRDA_DIV(_PCLK_, _BAUD_)      (((_PCLK_)*25U)/(4U*(_BAUD_)))
+
+#define IRDA_DIVMANT(_PCLK_, _BAUD_)  (IRDA_DIV((_PCLK_), (_BAUD_))/100U)
+
+#define IRDA_DIVFRAQ(_PCLK_, _BAUD_)  ((((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U)
+
+/* UART BRR = mantissa + overflow + fraction
+            = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
+#define IRDA_BRR(_PCLK_, _BAUD_)      (((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \
+                                        (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+                                        (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Functions IRDA Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h

@@ -0,0 +1,223 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_iwdg.h
+  * @author  MCD Application Team
+  * @brief   Header file of IWDG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_IWDG_H
+#define STM32F1xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IWDG IWDG
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+  * @{
+  */
+
+/**
+  * @brief  IWDG Init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Select the prescaler of the IWDG.
+                            This parameter can be a value of @ref IWDG_Prescaler */
+
+  uint32_t Reload;     /*!< Specifies the IWDG down-counter reload value.
+                            This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+  * @brief  IWDG Handle Structure definition
+  */
+typedef struct
+{
+  IWDG_TypeDef                 *Instance;  /*!< Register base address    */
+
+  IWDG_InitTypeDef             Init;       /*!< IWDG required parameters */
+} IWDG_HandleTypeDef;
+
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+  * @{
+  */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+  * @{
+  */
+#define IWDG_PRESCALER_4                0x00000000u                                     /*!< IWDG prescaler set to 4   */
+#define IWDG_PRESCALER_8                IWDG_PR_PR_0                                    /*!< IWDG prescaler set to 8   */
+#define IWDG_PRESCALER_16               IWDG_PR_PR_1                                    /*!< IWDG prescaler set to 16  */
+#define IWDG_PRESCALER_32               (IWDG_PR_PR_1 | IWDG_PR_PR_0)                   /*!< IWDG prescaler set to 32  */
+#define IWDG_PRESCALER_64               IWDG_PR_PR_2                                    /*!< IWDG prescaler set to 64  */
+#define IWDG_PRESCALER_128              (IWDG_PR_PR_2 | IWDG_PR_PR_0)                   /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256              (IWDG_PR_PR_2 | IWDG_PR_PR_1)                   /*!< IWDG prescaler set to 256 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Enable the IWDG peripheral.
+  * @param  __HANDLE__  IWDG handle
+  * @retval None
+  */
+#define __HAL_IWDG_START(__HANDLE__)                WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
+
+/**
+  * @brief  Reload IWDG counter with value defined in the reload register
+  *         (write access to IWDG_PR and IWDG_RLR registers disabled).
+  * @param  __HANDLE__  IWDG handle
+  * @retval None
+  */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__)       WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Functions  IWDG Exported Functions
+  * @{
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
+  * @{
+  */
+/* Initialization/Start functions  ********************************************/
+HAL_StatusTypeDef     HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef     HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IWDG_Private_Constants IWDG Private Constants
+  * @{
+  */
+
+/**
+  * @brief  IWDG Key Register BitMask
+  */
+#define IWDG_KEY_RELOAD                 0x0000AAAAu  /*!< IWDG Reload Counter Enable   */
+#define IWDG_KEY_ENABLE                 0x0000CCCCu  /*!< IWDG Peripheral Enable       */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE    0x00005555u  /*!< IWDG KR Write Access Enable  */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE   0x00000000u  /*!< IWDG KR Write Access Disable */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Macros IWDG Private Macros
+  * @{
+  */
+
+/**
+  * @brief  Enable write access to IWDG_PR and IWDG_RLR registers.
+  * @param  __HANDLE__  IWDG handle
+  * @retval None
+  */
+#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__)  WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
+
+/**
+  * @brief  Disable write access to IWDG_PR and IWDG_RLR registers.
+  * @param  __HANDLE__  IWDG handle
+  * @retval None
+  */
+#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
+
+/**
+  * @brief  Check IWDG prescaler value.
+  * @param  __PRESCALER__  IWDG prescaler value
+  * @retval None
+  */
+#define IS_IWDG_PRESCALER(__PRESCALER__)      (((__PRESCALER__) == IWDG_PRESCALER_4)  || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_8)  || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+  * @brief  Check IWDG reload value.
+  * @param  __RELOAD__  IWDG reload value
+  * @retval None
+  */
+#define IS_IWDG_RELOAD(__RELOAD__)            ((__RELOAD__) <= IWDG_RLR_RL)
+
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MCU_STM32F1xx_Matlab/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_mmc.h

@@ -0,0 +1,745 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_mmc.h
+  * @author  MCD Application Team
+  * @brief   Header file of MMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_MMC_H
+#define STM32F1xx_HAL_MMC_H
+
+#if defined(SDIO)
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_sdmmc.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup MMC
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup MMC_Exported_Types MMC Exported Types
+  * @{
+  */
+
+/** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure
+  * @{
+  */   
+typedef enum
+{
+  HAL_MMC_STATE_RESET                  = 0x00000000U,  /*!< MMC not yet initialized or disabled  */
+  HAL_MMC_STATE_READY                  = 0x00000001U,  /*!< MMC initialized and ready for use    */
+  HAL_MMC_STATE_TIMEOUT                = 0x00000002U,  /*!< MMC Timeout state                    */
+  HAL_MMC_STATE_BUSY                   = 0x00000003U,  /*!< MMC process ongoing                  */
+  HAL_MMC_STATE_PROGRAMMING            = 0x00000004U,  /*!< MMC Programming State                */
+  HAL_MMC_STATE_RECEIVING              = 0x00000005U,  /*!< MMC Receinving State                 */
+  HAL_MMC_STATE_TRANSFER               = 0x00000006U,  /*!< MMC Transfer State                  */
+  HAL_MMC_STATE_ERROR                  = 0x0000000FU   /*!< MMC is in error state                */
+}HAL_MMC_StateTypeDef;
+/** 
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure
+  * @{
+  */   
+typedef uint32_t HAL_MMC_CardStateTypeDef;
+
+#define HAL_MMC_CARD_READY          0x00000001U  /*!< Card state is ready                     */
+#define HAL_MMC_CARD_IDENTIFICATION 0x00000002U  /*!< Card is in identification state         */
+#define HAL_MMC_CARD_STANDBY        0x00000003U  /*!< Card is in standby state                */
+#define HAL_MMC_CARD_TRANSFER       0x00000004U  /*!< Card is in transfer state               */
+#define HAL_MMC_CARD_SENDING        0x00000005U  /*!< Card is sending an operation            */
+#define HAL_MMC_CARD_RECEIVING      0x00000006U  /*!< Card is receiving operation information */
+#define HAL_MMC_CARD_PROGRAMMING    0x00000007U  /*!< Card is in programming state            */
+#define HAL_MMC_CARD_DISCONNECTED   0x00000008U  /*!< Card is disconnected                    */
+#define HAL_MMC_CARD_ERROR          0x000000FFU  /*!< Card response Error                     */
+/** 
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition   
+  * @{
+  */
+#define MMC_InitTypeDef      SDIO_InitTypeDef 
+#define MMC_TypeDef          SDIO_TypeDef
+
+/** 
+  * @brief  MMC Card Information Structure definition
+  */ 
+typedef struct
+{
+  uint32_t CardType;                     /*!< Specifies the card Type                         */
+
+  uint32_t Class;                        /*!< Specifies the class of the card class           */
+
+  uint32_t RelCardAdd;                   /*!< Specifies the Relative Card Address             */
+  
+  uint32_t BlockNbr;                     /*!< Specifies the Card Capacity in blocks           */
+
+  uint32_t BlockSize;                    /*!< Specifies one block size in bytes               */
+  
+  uint32_t LogBlockNbr;                  /*!< Specifies the Card logical Capacity in blocks   */
+
+  uint32_t LogBlockSize;                 /*!< Specifies logical block size in bytes           */
+
+}HAL_MMC_CardInfoTypeDef;
+
+/** 
+  * @brief  MMC handle Structure definition
+  */ 
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+typedef struct __MMC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */
+{
+  MMC_TypeDef                  *Instance;        /*!< MMC registers base address           */
+  
+  MMC_InitTypeDef              Init;             /*!< MMC required parameters              */
+  
+  HAL_LockTypeDef              Lock;             /*!< MMC locking object                   */
+  
+  uint8_t                      *pTxBuffPtr;      /*!< Pointer to MMC Tx transfer Buffer    */
+
+  uint32_t                     TxXferSize;       /*!< MMC Tx Transfer size                 */
+
+  uint8_t                      *pRxBuffPtr;      /*!< Pointer to MMC Rx transfer Buffer    */
+
+  uint32_t                     RxXferSize;       /*!< MMC Rx Transfer size                 */
+  
+  __IO uint32_t                Context;          /*!< MMC transfer context                 */
+ 
+  __IO HAL_MMC_StateTypeDef    State;            /*!< MMC card State                       */
+  
+  __IO uint32_t                ErrorCode;        /*!< MMC Card Error codes                 */  
+ 
+  DMA_HandleTypeDef            *hdmarx;          /*!< MMC Rx DMA handle parameters         */
+  
+  DMA_HandleTypeDef            *hdmatx;          /*!< MMC Tx DMA handle parameters         */
+  
+  HAL_MMC_CardInfoTypeDef      MmcCard;          /*!< MMC Card information                 */
+
+  uint32_t                     CSD[4U];          /*!< MMC card specific data table         */
+  
+  uint32_t                     CID[4U];          /*!< MMC card identification number table */
+  
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+  void (* TxCpltCallback)                 (struct __MMC_HandleTypeDef *hmmc);
+  void (* RxCpltCallback)                 (struct __MMC_HandleTypeDef *hmmc);
+  void (* ErrorCallback)                  (struct __MMC_HandleTypeDef *hmmc);
+  void (* AbortCpltCallback)              (struct __MMC_HandleTypeDef *hmmc);
+
+  void (* MspInitCallback)                (struct __MMC_HandleTypeDef *hmmc);
+  void (* MspDeInitCallback)              (struct __MMC_HandleTypeDef *hmmc);
+#endif  
+}MMC_HandleTypeDef;
+
+/** 
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register 
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  CSDStruct;            /*!< CSD structure                         */
+  __IO uint8_t  SysSpecVersion;       /*!< System specification version          */
+  __IO uint8_t  Reserved1;            /*!< Reserved                              */
+  __IO uint8_t  TAAC;                 /*!< Data read access time 1               */
+  __IO uint8_t  NSAC;                 /*!< Data read access time 2 in CLK cycles */
+  __IO uint8_t  MaxBusClkFrec;        /*!< Max. bus clock frequency              */
+  __IO uint16_t CardComdClasses;      /*!< Card command classes                  */
+  __IO uint8_t  RdBlockLen;           /*!< Max. read data block length           */
+  __IO uint8_t  PartBlockRead;        /*!< Partial blocks for read allowed       */
+  __IO uint8_t  WrBlockMisalign;      /*!< Write block misalignment              */
+  __IO uint8_t  RdBlockMisalign;      /*!< Read block misalignment               */
+  __IO uint8_t  DSRImpl;              /*!< DSR implemented                       */
+  __IO uint8_t  Reserved2;            /*!< Reserved                              */
+  __IO uint32_t DeviceSize;           /*!< Device Size                           */
+  __IO uint8_t  MaxRdCurrentVDDMin;   /*!< Max. read current @ VDD min           */
+  __IO uint8_t  MaxRdCurrentVDDMax;   /*!< Max. read current @ VDD max           */
+  __IO uint8_t  MaxWrCurrentVDDMin;   /*!< Max. write current @ VDD min          */
+  __IO uint8_t  MaxWrCurrentVDDMax;   /*!< Max. write current @ VDD max          */
+  __IO uint8_t  DeviceSizeMul;        /*!< Device size multiplier                */
+  __IO uint8_t  EraseGrSize;          /*!< Erase group size                      */
+  __IO uint8_t  EraseGrMul;           /*!< Erase group size multiplier           */
+  __IO uint8_t  WrProtectGrSize;      /*!< Write protect group size              */
+  __IO uint8_t  WrProtectGrEnable;    /*!< Write protect group enable            */
+  __IO uint8_t  ManDeflECC;           /*!< Manufacturer default ECC              */
+  __IO uint8_t  WrSpeedFact;          /*!< Write speed factor                    */
+  __IO uint8_t  MaxWrBlockLen;        /*!< Max. write data block length          */
+  __IO uint8_t  WriteBlockPaPartial;  /*!< Partial blocks for write allowed      */
+  __IO uint8_t  Reserved3;            /*!< Reserved                              */
+  __IO uint8_t  ContentProtectAppli;  /*!< Content protection application        */
+  __IO uint8_t  FileFormatGroup;      /*!< File format group                     */
+  __IO uint8_t  CopyFlag;             /*!< Copy flag (OTP)                       */
+  __IO uint8_t  PermWrProtect;        /*!< Permanent write protection            */
+  __IO uint8_t  TempWrProtect;        /*!< Temporary write protection            */
+  __IO uint8_t  FileFormat;           /*!< File format                           */
+  __IO uint8_t  ECC;                  /*!< ECC code                              */
+  __IO uint8_t  CSD_CRC;              /*!< CSD CRC                               */
+  __IO uint8_t  Reserved4;            /*!< Always 1                              */
+  
+}HAL_MMC_CardCSDTypeDef;
+/** 
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  ManufacturerID;  /*!< Manufacturer ID       */
+  __IO uint16_t OEM_AppliID;     /*!< OEM/Application ID    */
+  __IO uint32_t ProdName1;       /*!< Product Name part1    */
+  __IO uint8_t  ProdName2;       /*!< Product Name part2    */
+  __IO uint8_t  ProdRev;         /*!< Product Revision      */
+  __IO uint32_t ProdSN;          /*!< Product Serial Number */
+  __IO uint8_t  Reserved1;       /*!< Reserved1             */
+  __IO uint16_t ManufactDate;    /*!< Manufacturing Date    */
+  __IO uint8_t  CID_CRC;         /*!< CID CRC               */
+  __IO uint8_t  Reserved2;       /*!< Always 1              */
+
+}HAL_MMC_CardCIDTypeDef;
+/** 
+  * @}
+  */
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+/** @defgroup MMC_Exported_Types_Group6 MMC Callback ID enumeration definition 
+  * @{
+  */
+typedef enum
+{
+  HAL_MMC_TX_CPLT_CB_ID                 = 0x00U,  /*!< MMC Tx Complete Callback ID                     */
+  HAL_MMC_RX_CPLT_CB_ID                 = 0x01U,  /*!< MMC Rx Complete Callback ID                     */
+  HAL_MMC_ERROR_CB_ID                   = 0x02U,  /*!< MMC Error Callback ID                           */
+  HAL_MMC_ABORT_CB_ID                   = 0x03U,  /*!< MMC Abort Callback ID                           */
+
+  HAL_MMC_MSP_INIT_CB_ID                = 0x10U,  /*!< MMC MspInit Callback ID                         */
+  HAL_MMC_MSP_DEINIT_CB_ID              = 0x11U   /*!< MMC MspDeInit Callback ID                       */
+}HAL_MMC_CallbackIDTypeDef;
+/** 
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group7 MMC Callback pointer definition 
+  * @{
+  */
+typedef void (*pMMC_CallbackTypeDef)           (MMC_HandleTypeDef *hmmc);
+/** 
+  * @}
+  */
+#endif
+/** 
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup MMC_Exported_Constants Exported Constants
+  * @{
+  */
+
+#define MMC_BLOCKSIZE              512U  /*!< Block size is 512 bytes */
+
+/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition 
+  * @{
+  */  
+#define HAL_MMC_ERROR_NONE                     SDMMC_ERROR_NONE                    /*!< No error                                                      */
+#define HAL_MMC_ERROR_CMD_CRC_FAIL             SDMMC_ERROR_CMD_CRC_FAIL            /*!< Command response received (but CRC check failed)              */
+#define HAL_MMC_ERROR_DATA_CRC_FAIL            SDMMC_ERROR_DATA_CRC_FAIL           /*!< Data block sent/received (CRC check failed)                   */
+#define HAL_MMC_ERROR_CMD_RSP_TIMEOUT          SDMMC_ERROR_CMD_RSP_TIMEOUT         /*!< Command response timeout                                      */
+#define HAL_MMC_ERROR_DATA_TIMEOUT             SDMMC_ERROR_DATA_TIMEOUT            /*!< Data timeout                                                  */
+#define HAL_MMC_ERROR_TX_UNDERRUN              SDMMC_ERROR_TX_UNDERRUN             /*!< Transmit FIFO underrun                                        */
+#define HAL_MMC_ERROR_RX_OVERRUN               SDMMC_ERROR_RX_OVERRUN              /*!< Receive FIFO overrun                                          */
+#define HAL_MMC_ERROR_ADDR_MISALIGNED          SDMMC_ERROR_ADDR_MISALIGNED         /*!< Misaligned address                                            */
+#define HAL_MMC_ERROR_BLOCK_LEN_ERR            SDMMC_ERROR_BLOCK_LEN_ERR           /*!< Transferred block length is not allowed for the card or the 
+                                                                                       number of transferred bytes does not match the block length   */
+#define HAL_MMC_ERROR_ERASE_SEQ_ERR            SDMMC_ERROR_ERASE_SEQ_ERR           /*!< An error in the sequence of erase command occurs              */
+#define HAL_MMC_ERROR_BAD_ERASE_PARAM          SDMMC_ERROR_BAD_ERASE_PARAM         /*!< An invalid selection for erase groups                         */
+#define HAL_MMC_ERROR_WRITE_PROT_VIOLATION     SDMMC_ERROR_WRITE_PROT_VIOLATION    /*!< Attempt to program a write protect block                      */
+#define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED       SDMMC_ERROR_LOCK_UNLOCK_FAILED      /*!< Sequence or password error has been detected in unlock 
+                                                                                       command or if there was an attempt to access a locked card    */
+#define HAL_MMC_ERROR_COM_CRC_FAILED           SDMMC_ERROR_COM_CRC_FAILED          /*!< CRC check of the previous command failed                      */
+#define HAL_MMC_ERROR_ILLEGAL_CMD              SDMMC_ERROR_ILLEGAL_CMD             /*!< Command is not legal for the card state                       */
+#define HAL_MMC_ERROR_CARD_ECC_FAILED          SDMMC_ERROR_CARD_ECC_FAILED         /*!< Card internal ECC was applied but failed to correct the data  */
+#define HAL_MMC_ERROR_CC_ERR                   SDMMC_ERROR_CC_ERR                  /*!< Internal card controller error                                */
+#define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR      SDMMC_ERROR_GENERAL_UNKNOWN_ERR     /*!< General or unknown error                                      */
+#define HAL_MMC_ERROR_STREAM_READ_UNDERRUN     SDMMC_ERROR_STREAM_READ_UNDERRUN    /*!< The card could not sustain data reading in stream rmode       */
+#define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN     SDMMC_ERROR_STREAM_WRITE_OVERRUN    /*!< The card could not sustain data programming in stream mode    */
+#define HAL_MMC_ERROR_CID_CSD_OVERWRITE        SDMMC_ERROR_CID_CSD_OVERWRITE       /*!< CID/CSD overwrite error                                       */
+#define HAL_MMC_ERROR_WP_ERASE_SKIP            SDMMC_ERROR_WP_ERASE_SKIP           /*!< Only partial address space was erased                         */
+#define HAL_MMC_ERROR_CARD_ECC_DISABLED        SDMMC_ERROR_CARD_ECC_DISABLED       /*!< Command has been executed without using internal ECC          */
+#define HAL_MMC_ERROR_ERASE_RESET              SDMMC_ERROR_ERASE_RESET             /*!< Erase sequence was cleared before executing because an out 
+                                                                                       of erase sequence command was received                        */
+#define HAL_MMC_ERROR_AKE_SEQ_ERR              SDMMC_ERROR_AKE_SEQ_ERR             /*!< Error in sequence of authentication                           */
+#define HAL_MMC_ERROR_INVALID_VOLTRANGE        SDMMC_ERROR_INVALID_VOLTRANGE       /*!< Error in case of invalid voltage range                        */        
+#define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE        SDMMC_ERROR_ADDR_OUT_OF_RANGE       /*!< Error when addressed block is out of range                    */        
+#define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE   SDMMC_ERROR_REQUEST_NOT_APPLICABLE  /*!< Error when command request is not applicable                  */  
+#define HAL_MMC_ERROR_PARAM                    SDMMC_ERROR_INVALID_PARAMETER       /*!< the used parameter is not valid                               */  
+#define HAL_MMC_ERROR_UNSUPPORTED_FEATURE      SDMMC_ERROR_UNSUPPORTED_FEATURE     /*!< Error when feature is not insupported                         */
+#define HAL_MMC_ERROR_BUSY                     SDMMC_ERROR_BUSY                    /*!< Error when transfer process is busy                           */ 
+#define HAL_MMC_ERROR_DMA                      SDMMC_ERROR_DMA                     /*!< Error while DMA transfer                                      */
+#define HAL_MMC_ERROR_TIMEOUT                  SDMMC_ERROR_TIMEOUT                 /*!< Timeout error                                                 */
+                                                
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+#define HAL_MMC_ERROR_INVALID_CALLBACK         SDMMC_ERROR_INVALID_PARAMETER       /*!< Invalid callback error                                        */
+#endif
+/** 
+  * @}
+  */
+ 
+/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration
+  * @{
+  */ 
+#define   MMC_CONTEXT_NONE                            0x00000000U   /*!< None                             */
+#define   MMC_CONTEXT_READ_SINGLE_BLOCK               0x00000001U   /*!< Read single block operation      */
+#define   MMC_CONTEXT_READ_MULTIPLE_BLOCK             0x00000002U   /*!< Read multiple blocks operation   */
+#define   MMC_CONTEXT_WRITE_SINGLE_BLOCK              0x00000010U   /*!< Write single block operation     */
+#define   MMC_CONTEXT_WRITE_MULTIPLE_BLOCK            0x00000020U   /*!< Write multiple blocks operation  */
+#define   MMC_CONTEXT_IT                              0x00000008U   /*!< Process in Interrupt mode        */
+#define   MMC_CONTEXT_DMA                             0x00000080U   /*!< Process in DMA mode              */
+
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode
+  * @{
+  */
+/** 
+  * @brief 
+  */
+#define MMC_HIGH_VOLTAGE_RANGE         0x80FF8000U  /*!< VALUE OF ARGUMENT            */
+#define MMC_DUAL_VOLTAGE_RANGE         0x80FF8080U  /*!< VALUE OF ARGUMENT            */
+#define eMMC_HIGH_VOLTAGE_RANGE        0xC0FF8000U  /*!< for eMMC > 2Gb sector mode   */
+#define eMMC_DUAL_VOLTAGE_RANGE        0xC0FF8080U  /*!< for eMMC > 2Gb sector mode   */
+#define MMC_INVALID_VOLTAGE_RANGE      0x0001FF01U 
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards
+  * @{
+  */
+#define  MMC_LOW_CAPACITY_CARD                0x00000000U    /*!< MMC Card Capacity <=2Gbytes   */
+#define  MMC_HIGH_CAPACITY_CARD               0x00000001U    /*!< MMC Card Capacity >2Gbytes and <2Tbytes   */
+
+/**
+  * @}
+  */
+      
+/**
+  * @}
+  */
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup MMC_Exported_macros MMC Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+/** @brief Reset MMC handle state.
+  * @param  __HANDLE__ : MMC handle.
+  * @retval None
+  */
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__)           do {                                              \
+                                                               (__HANDLE__)->State = HAL_MMC_STATE_RESET; \
+                                                               (__HANDLE__)->MspInitCallback = NULL;       \
+                                                               (__HANDLE__)->MspDeInitCallback = NULL;     \
+                                                             } while(0)
+#else
+#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__)           ((__HANDLE__)->State = HAL_MMC_STATE_RESET)
+#endif
+ 
+/**
+  * @brief  Enable the MMC device.
+  * @retval None
+  */ 
+#define __HAL_MMC_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
+
+/**
+  * @brief  Disable the MMC device.
+  * @retval None
+  */
+#define __HAL_MMC_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
+
+/**
+  * @brief  Enable the SDMMC DMA transfer.
+  * @retval None
+  */ 
+#define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
+
+/**
+  * @brief  Disable the SDMMC DMA transfer.
+  * @retval None
+  */
+#define __HAL_MMC_DMA_DISABLE(__HANDLE__)  __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
+ 
+/**
+  * @brief  Enable the MMC device interrupt.
+  * @param  __HANDLE__: MMC Handle  
+  * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, DATACOUNT, is zero) interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  * @retval None
+  */
+#define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Disable the MMC device interrupt.
+  * @param  __HANDLE__: MMC Handle   
+  * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, DATACOUNT, is zero) interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt   
+  * @retval None
+  */
+#define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified MMC flag is set or not. 
+  * @param  __HANDLE__: MMC Handle   
+  * @param  __FLAG__: specifies the flag to check. 
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, DATACOUNT, is zero)
+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDACT:   Command transfer in progress
+  *            @arg SDIO_FLAG_TXACT:    Data transmit in progress
+  *            @arg SDIO_FLAG_RXACT:    Data receive in progress
+  *            @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+  *            @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+  *            @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full
+  *            @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full
+  *            @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty
+  *            @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty
+  *            @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO
+  *            @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO
+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  * @retval The new state of MMC FLAG (SET or RESET).
+  */
+#define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+  * @brief  Clear the MMC's pending flags.
+  * @param  __HANDLE__: MMC Handle  
+  * @param  __FLAG__: specifies the flag to clear.  
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, DATACOUNT, is zero)
+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  * @retval None
+  */
+#define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+  * @brief  Check whether the specified MMC interrupt has occurred or not.
+  * @param  __HANDLE__: MMC Handle   
+  * @param  __INTERRUPT__: specifies the SDMMC interrupt source to check. 
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, DATACOUNT, is zero) interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  * @retval The new state of MMC IT (SET or RESET).
+  */
+#define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Clear the MMC's interrupt pending bits.
+  * @param  __HANDLE__: MMC Handle
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. 
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, DATACOUNT, is zero) interrupt
+  *            @arg SDIO_IT_DBCKEND:    Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_TXFIFOHE:   Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF:   Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_RXFIFOF:    Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:    Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  * @retval None
+  */
+#define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup MMC_Exported_Functions MMC Exported Functions
+  * @{
+  */
+  
+/** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc);
+void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc);
+
+/**
+  * @}
+  */
+  
+/** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
+HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
+/* Non-Blocking mode: IT */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+
+void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc);
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+/* MMC callback registering/unregistering */
+HAL_StatusTypeDef HAL_MMC_RegisterCallback  (MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId);
+#endif
+/**
+  * @}
+  */
+  
+/** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode);
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group4 MMC card related functions
+  * @{
+  */
+HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID);
+HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD);
+HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo);
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions
+  * @{
+  */
+HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc);
+uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc);
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management
+  * @{
+  */
+HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc);
+/**
+  * @}
+  */
+    
+/* Private types -------------------------------------------------------------*/
+/** @defgroup MMC_Private_Types MMC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup MMC_Private_Defines MMC Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+          
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Variables MMC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Constants MMC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup MMC_Private_Macros MMC Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Functions MMC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SDIO */
+
+#endif /* STM32F1xx_HAL_MMC_H */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/