Добавлена терминалка от андрея, +проект вынесен в отдельную папку

2025-03-05 17:23:57 +03:00
parent 424ca121f8
commit fad121a9fd
442 changed files with 56 additions and 50 deletions
--- a/py_project/Core/Src/usart.c
+++ b/py_project/Core/Src/usart.c
@@ -0,0 +1,98 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usart.c
+  * @brief   This file provides code for the configuration
+  *          of the USART instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "usart.h"
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+UART_HandleTypeDef huart1;
+
+/* USART1 init function */
+
+void MX_USART1_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART1_Init 0 */
+
+  /* USER CODE END USART1_Init 0 */
+
+  /* USER CODE BEGIN USART1_Init 1 */
+
+  /* USER CODE END USART1_Init 1 */
+  huart1.Instance = USART1;
+  huart1.Init.BaudRate = MODBUS_SPEED;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits = UART_STOPBITS_1;
+  huart1.Init.Parity = UART_PARITY_NONE;
+  huart1.Init.Mode = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART1_Init 2 */
+
+  /* USER CODE END USART1_Init 2 */
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(uartHandle->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspInit 0 */
+
+  /* USER CODE END USART1_MspInit 0 */
+    /* USART1 clock enable */
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    __HAL_RCC_USART1_CLK_ENABLE();
+    
+    /* GPIO initialization
+    PB04:TX,
+    PB05:RX
+    */
+    GPIO_InitStruct.Pin       = GPIO_PIN_4;
+    GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull      = GPIO_PULLUP;
+    GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_5;
+    GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+  
+    /* USART1 interrupt Init */
+    HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(USART1_IRQn);
+  /* USER CODE BEGIN USART1_MspInit 1 */
+
+  /* USER CODE END USART1_MspInit 1 */
+  }
+}
+
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */