запустил измерения температуры модуля пч на py32f002b
This commit is contained in:
284
Drivers/PY32F002B_HAL_Driver/Src/py32f002b_ll_spi.c
Normal file
284
Drivers/PY32F002B_HAL_Driver/Src/py32f002b_ll_spi.c
Normal file
@@ -0,0 +1,284 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file py32f002b_ll_spi.c
|
||||
* @author MCU Application Team
|
||||
* @brief SPI LL module driver.
|
||||
******************************************************************************
|
||||
Additional table :
|
||||
|
||||
DataSize = SPI_DATASIZE_8BIT:
|
||||
+----------------------------------------------------------------------------------------------+
|
||||
| | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
|
||||
| Process | Tranfert mode |---------------------|----------------------|----------------------|
|
||||
| | | Master | Slave | Master | Slave | Master | Slave |
|
||||
|==============================================================================================|
|
||||
| TX | Polling | Fpclk/2 | Fpclk/32 | NA | NA | NA | NA |
|
||||
| / |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
| RX | Interrupt | Fpclk/2 | Fpclk/32 | NA | NA | NA | NA |
|
||||
| |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
|=========|================|==========|==========|===========|==========|===========|==========|
|
||||
| | Polling | NA | NA | Fpclk/4 | Fpclk/8 | Fpclk/4 | Fpclk/8 |
|
||||
| R |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
| X | Interrupt | NA | NA | Fpclk/16 | Fpclk/16 | Fpclk/16 | Fpclk/16 |
|
||||
| |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
|=========|================|==========|==========|===========|==========|===========|==========|
|
||||
| | Polling | NA | NA | NA | NA | Fpclk/2 | Fpclk/8 |
|
||||
| T |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
| X | Interrupt | NA | NA | NA | NA | Fpclk/2 | Fpclk/16 |
|
||||
| |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
+----------------------------------------------------------------------------------------------+
|
||||
|
||||
DataSize = SPI_DATASIZE_16BIT:
|
||||
+----------------------------------------------------------------------------------------------+
|
||||
| | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
|
||||
| Process | Tranfert mode |---------------------|----------------------|----------------------|
|
||||
| | | Master | Slave | Master | Slave | Master | Slave |
|
||||
|==============================================================================================|
|
||||
| TX | Polling | Fpclk/2 | Fpclk/16 | NA | NA | NA | NA |
|
||||
| / |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
| RX | Interrupt | Fpclk/2 | Fpclk/16 | NA | NA | NA | NA |
|
||||
| |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
|=========|================|==========|==========|===========|==========|===========|==========|
|
||||
| | Polling | NA | NA | Fpclk/2 | Fpclk/4 | Fpclk/2 | Fpclk/4 |
|
||||
| |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
| R | Interrupt | NA | NA | Fpclk/2 | Fpclk/8 | Fpclk/2 | Fpclk/8 |
|
||||
| X |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
|=========|================|==========|==========|===========|==========|===========|==========|
|
||||
| | Polling | NA | NA | NA | NA | Fpclk/2 | Fpclk/4 |
|
||||
| |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
| T | Interrupt | NA | NA | NA | NA | Fpclk/2 | Fpclk/8 |
|
||||
| X |----------------|----------|----------|-----------|----------|-----------|----------|
|
||||
+----------------------------------------------------------------------------------------------+
|
||||
@note The max SPI frequency depend on SPI data size (8bits, 16bits),
|
||||
SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT).
|
||||
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) Puya Semiconductor Co.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "py32f002b_ll_spi.h"
|
||||
#include "py32f002b_ll_bus.h"
|
||||
#include "py32f002b_ll_rcc.h"
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
#include "py32_assert.h"
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
/** @addtogroup PY32F002B_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (SPI1)
|
||||
|
||||
/** @addtogroup SPI_LL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup SPI_LL_Private_Constants SPI Private Constants
|
||||
* @{
|
||||
*/
|
||||
/* SPI registers Masks */
|
||||
#define SPI_CR1_CLEAR_MASK (SPI_CR1_CPHA | SPI_CR1_CPOL | SPI_CR1_MSTR | \
|
||||
SPI_CR1_BR | SPI_CR1_LSBFIRST | SPI_CR1_SSI | \
|
||||
SPI_CR1_SSM | SPI_CR1_RXONLY | SPI_CR1_DFF | \
|
||||
SPI_CR1_BIDIOE | SPI_CR1_BIDIMODE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup SPI_LL_Private_Macros SPI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) \
|
||||
|| ((__VALUE__) == LL_SPI_SIMPLEX_RX) \
|
||||
|| ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \
|
||||
|| ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX))
|
||||
|
||||
#define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) \
|
||||
|| ((__VALUE__) == LL_SPI_MODE_SLAVE))
|
||||
|
||||
#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) \
|
||||
|| ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT))
|
||||
|
||||
#define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) \
|
||||
|| ((__VALUE__) == LL_SPI_POLARITY_HIGH))
|
||||
|
||||
#define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) \
|
||||
|| ((__VALUE__) == LL_SPI_PHASE_2EDGE))
|
||||
|
||||
#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) \
|
||||
|| ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \
|
||||
|| ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT))
|
||||
|
||||
#define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) \
|
||||
|| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) \
|
||||
|| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) \
|
||||
|| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) \
|
||||
|| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) \
|
||||
|| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) \
|
||||
|| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \
|
||||
|| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256))
|
||||
|
||||
#define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) \
|
||||
|| ((__VALUE__) == LL_SPI_MSB_FIRST))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup SPI_LL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI_LL_EF_Init
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief De-initialize the SPI registers to their default reset values.
|
||||
* @param SPIx SPI Instance
|
||||
* @retval An ErrorStatus enumeration value:
|
||||
* - SUCCESS: SPI registers are de-initialized
|
||||
* - ERROR: SPI registers are not de-initialized
|
||||
*/
|
||||
ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx)
|
||||
{
|
||||
ErrorStatus status = ERROR;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_SPI_ALL_INSTANCE(SPIx));
|
||||
|
||||
if (SPIx == SPI1)
|
||||
{
|
||||
/* Force reset of SPI clock */
|
||||
LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_SPI1);
|
||||
|
||||
/* Release reset of SPI clock */
|
||||
LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_SPI1);
|
||||
|
||||
status = SUCCESS;
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initialize the SPI registers according to the specified parameters in SPI_InitStruct.
|
||||
* @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0),
|
||||
* SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
|
||||
* @param SPIx SPI Instance
|
||||
* @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure
|
||||
* @retval An ErrorStatus enumeration value. (Return always SUCCESS)
|
||||
*/
|
||||
ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct)
|
||||
{
|
||||
ErrorStatus status = ERROR;
|
||||
|
||||
/* Check the SPI Instance SPIx*/
|
||||
assert_param(IS_SPI_ALL_INSTANCE(SPIx));
|
||||
|
||||
/* Check the SPI parameters from SPI_InitStruct*/
|
||||
assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection));
|
||||
assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode));
|
||||
assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth));
|
||||
assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity));
|
||||
assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase));
|
||||
assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS));
|
||||
assert_param(IS_LL_SPI_BAUDRATE(SPI_InitStruct->BaudRate));
|
||||
assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder));
|
||||
|
||||
if (LL_SPI_IsEnabled(SPIx) == 0x00000000U)
|
||||
{
|
||||
/*---------------------------- SPIx CR1 Configuration ------------------------
|
||||
* Configure SPIx CR1 with parameters:
|
||||
* - TransferDirection: SPI_CR1_BIDIMODE, SPI_CR1_BIDIOE and SPI_CR1_RXONLY bits
|
||||
* - Master/Slave Mode: SPI_CR1_MSTR bit
|
||||
* - ClockPolarity: SPI_CR1_CPOL bit
|
||||
* - ClockPhase: SPI_CR1_CPHA bit
|
||||
* - NSS management: SPI_CR1_SSM bit
|
||||
* - BaudRate prescaler: SPI_CR1_BR[2:0] bits
|
||||
* - BitOrder: SPI_CR1_LSBFIRST bit
|
||||
* - DataWidth: SPI_CR1_DFF bit
|
||||
*/
|
||||
MODIFY_REG(SPIx->CR1,
|
||||
SPI_CR1_CLEAR_MASK,
|
||||
SPI_InitStruct->TransferDirection | SPI_InitStruct->Mode |
|
||||
SPI_InitStruct->ClockPolarity | SPI_InitStruct->ClockPhase |
|
||||
(SPI_InitStruct->NSS & SPI_CR1_SSM) | SPI_InitStruct->BaudRate |
|
||||
SPI_InitStruct->BitOrder | SPI_InitStruct->DataWidth);
|
||||
|
||||
/*---------------------------- SPIx CR2 Configuration ------------------------
|
||||
* Configure SPIx CR2 with parameters:
|
||||
* - NSS management: SSOE bit
|
||||
*/
|
||||
MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((SPI_InitStruct->NSS >> 16U) & SPI_CR2_SSOE));
|
||||
|
||||
status = SUCCESS;
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set each @ref LL_SPI_InitTypeDef field to default value.
|
||||
* @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure
|
||||
* whose fields will be set to default values.
|
||||
* @retval None
|
||||
*/
|
||||
void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct)
|
||||
{
|
||||
/* Set SPI_InitStruct fields to default values */
|
||||
SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX;
|
||||
SPI_InitStruct->Mode = LL_SPI_MODE_SLAVE;
|
||||
SPI_InitStruct->DataWidth = LL_SPI_DATAWIDTH_8BIT;
|
||||
SPI_InitStruct->ClockPolarity = LL_SPI_POLARITY_LOW;
|
||||
SPI_InitStruct->ClockPhase = LL_SPI_PHASE_1EDGE;
|
||||
SPI_InitStruct->NSS = LL_SPI_NSS_HARD_INPUT;
|
||||
SPI_InitStruct->BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2;
|
||||
SPI_InitStruct->BitOrder = LL_SPI_MSB_FIRST;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined (SPI1) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/************************ (C) COPYRIGHT Puya *****END OF FILE****/
|
||||
Reference in New Issue
Block a user