/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "gpio.h"
#include "math.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "pwm.h"
#include "rs_message.h"
/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */
UART_SettingsTypeDef modbus1_suart;
TIM_SettingsTypeDef modbus1_stim;
RS_HandleTypeDef hmodbus1;
RS_MsgTypeDef MODBUS_MSG;
/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */
//MODBUS_HandleTypeDef hmodbus1;
/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/** 
	* @brief 	reInitialize Peripheral.
	* @note 	Данная функция необходима, если запрос на реинициализацию приходит от другой периферии.
	*					И чтобы не реинициализировать периферию в прерывании, она реинится в main while(1).
	*/
void Periph_reInit(void)
{		
	// wait for reinit modbus coil (requested by modbus interrupt)
	if(MB_Read_Coil_Global(COIL_UART_CTRL_GLOBAL, NULL) && hmodbus1.fTX_Done)
	{
		MB_Write_Coil_Global(COIL_UART_CTRL_GLOBAL, RESET_COIL);
		modbus1_suart.huart.Init.BaudRate = uart_ctrl[R_UART_CTRL_SPEED];
		RS_ReInit_UART(&hmodbus1 ,&modbus1_suart);
	}
	
	// fait for reinit log timer (requested by modbus interrupt)
	if((TIM_CTRL.sTimFreqHz != log_ctrl[R_LOG_CTRL_LOG_HZ]) && (log_ctrl[R_LOG_CTRL_LOG_HZ] != 0))
	{
		TIM_CTRL.sTimFreqHz = log_ctrl[R_LOG_CTRL_LOG_HZ];
		// clear logs params
		Set_Log_Params();	
		TIM_Base_MspDeInit(&TIM_CTRL.htim);
		Control_Timer_ReInit(&TIM_CTRL);
	}
	
	// READ	TIM_PWM_HZ
	if(hpwm1.stim.sTimFreqHz != pwm_ctrl[R_PWM_CTRL_PWM_HZ])
	{
		hpwm1.stim.sTimFreqHz = pwm_ctrl[R_PWM_CTRL_PWM_HZ];
		pwm_ctrl[R_PWM_CTRL_PWM_HZ] = hpwm1.stim.sTimFreqHz;
		// update logs params
		Set_Log_Params();	
		// reinit tim
		PWM_Sine_ReInit(&hpwm1);	
		PWM_SlavePhase_reInit(&hpwm2);
		PWM_SlavePhase_reInit(&hpwm3);
	}
}

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
 {
  /* USER CODE BEGIN 1 */
	__HAL_DBGMCU_FREEZE_TIM1();
	__HAL_DBGMCU_FREEZE_TIM3();
	__HAL_DBGMCU_FREEZE_TIM4();
	__HAL_DBGMCU_FREEZE_TIM12();
	// 0xE0042008
  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */
 
  /* USER CODE END Init */

  /* Configure the system clock */
  //SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  /* USER CODE BEGIN 2 */
	
	
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */		
	
	// init params for pwm and log
	pwm_ctrl[R_PWM_CTRL_PWM_VALUE] = 2560;
	pwm_ctrl[R_PWM_CTRL_PWM_HZ] = HZ_TIMER_PWM;
	pwm_ctrl[R_PWM_CTRL_MIN_PULSE_DUR] = 30;
	pwm_ctrl[R_PWM_CTRL_DEAD_TIME] = 1;
	pwm_ctrl[R_PWM_CTRL_SIN_TABLE_SIZE] = SIN_TABLE_SIZE_MAX;
	//MB_Write_Coil_Global(COIL_PWM_DC_MODE_GLOBAL, SET_COIL);
	MB_Write_Coil_Global(COIL_PWM_CH_MODE_GLOBAL, SET_COIL);
	MB_Write_Coil_Global(COIL_PWM_PHASE_MODE_GLOBAL, SET_COIL);
	
	log_ctrl[R_LOG_CTRL_LOG_HZ] = HZ_TIMER_CTRL;
	log_ctrl[R_LOG_CTRL_LOG_SIZE] = 50;
	log_ctrl[R_LOG_CTRL_LOG_PWM_NUMB] = 3;
	
	WriteSettingsToMem();
	MODBUS_FirstInit();
	Control_Timer_FirstInit();
	PWM_Sine_FirstInit();
	
	//---------------TEST MODBUS------------------
//	MODBUS_Transmit_IT(&hmodbus1, &MODBUS_MSG);		
	//RS_Receive_IT(&hmodbus1, &MODBUS_MSG);

  while (1)
  {		
    /* USER CODE END WHILE */		
		Periph_reInit();
    /* USER CODE BEGIN 3 */
//		HAL_Delay(200);
//		MB_Toogle_Coil_Local(&GPIOD->ODR, COIL_GPIOD_LED3);
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Configure the main internal regulator output voltage
  */
  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
  RCC_OscInitStruct.PLL.PLLM = 8;
  RCC_OscInitStruct.PLL.PLLN = 72;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = 4;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */