+проверка на реал мк (шим как с компаратора на tim1)

вторая посылка ляшенко

добавлен файл с схемами draw.io

mcu_project/upp/Core/Inc/stm32f1xx_it.h

@@ -55,6 +55,9 @@ void SVC_Handler(void);
 void DebugMon_Handler(void);
 void PendSV_Handler(void);
 void SysTick_Handler(void);
+void EXTI0_IRQHandler(void);
+void EXTI1_IRQHandler(void);
+void EXTI2_IRQHandler(void);
 /* USER CODE BEGIN EFP */
 
 /* USER CODE END EFP */

mcu_project/upp/Core/Inc/tim.h

@@ -32,14 +32,19 @@ extern "C" {
 
 /* USER CODE END Includes */
 
+extern TIM_HandleTypeDef htim1;
+
 extern TIM_HandleTypeDef htim2;
 
 /* USER CODE BEGIN Private defines */
 
 /* USER CODE END Private defines */
 
+void MX_TIM1_Init(void);
 void MX_TIM2_Init(void);
 
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
 /* USER CODE BEGIN Prototypes */
 
 /* USER CODE END Prototypes */

mcu_project/upp/Core/Src/gpio.c

@@ -42,10 +42,59 @@
 void MX_GPIO_Init(void)
 {
 
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
   /* GPIO Ports Clock Enable */
   __HAL_RCC_GPIOC_CLK_ENABLE();
   __HAL_RCC_GPIOD_CLK_ENABLE();
   __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin : PC13 */
+  GPIO_InitStruct.Pin = GPIO_PIN_13;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PA5 PA6 PA7 */
+  GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PB0 PB1 PB2 */
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PB12 PB13 PB14 */
+  GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* EXTI interrupt init*/
+  HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(EXTI0_IRQn);
+
+  HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(EXTI1_IRQn);
+
+  HAL_NVIC_SetPriority(EXTI2_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(EXTI2_IRQn);
 
 }
 

mcu_project/upp/Core/Src/main.c

@@ -92,8 +92,12 @@ int main(void)
   MX_ADC1_Init();
   MX_TIM2_Init();
   MX_USART1_UART_Init();
+  MX_TIM1_Init();
   /* USER CODE BEGIN 2 */
 	upp_init();
+	HAL_TIM_PWM_Start(&htim1, TIM_CHANNEL_1);
+	Upp.Duration = 8;
+	Upp.sine_freq = 50;
   /* USER CODE END 2 */
 
   /* Infinite loop */

mcu_project/upp/Core/Src/stm32f1xx_it.c

@@ -22,6 +22,7 @@
 #include "stm32f1xx_it.h"
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
+#include "upp.h"
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
@@ -198,6 +199,48 @@ void SysTick_Handler(void)
 /* please refer to the startup file (startup_stm32f1xx.s).                    */
 /******************************************************************************/
 
+/**
+  * @brief This function handles EXTI line0 interrupt.
+  */
+void EXTI0_IRQHandler(void)
+{
+  /* USER CODE BEGIN EXTI0_IRQn 0 */
+
+  /* USER CODE END EXTI0_IRQn 0 */
+  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_0);
+  /* USER CODE BEGIN EXTI0_IRQn 1 */
+	zero_cross_update_EXTI(&phase_A.zc_detector);
+  /* USER CODE END EXTI0_IRQn 1 */
+}
+
+/**
+  * @brief This function handles EXTI line1 interrupt.
+  */
+void EXTI1_IRQHandler(void)
+{
+  /* USER CODE BEGIN EXTI1_IRQn 0 */
+
+  /* USER CODE END EXTI1_IRQn 0 */
+  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_1);
+  /* USER CODE BEGIN EXTI1_IRQn 1 */
+	zero_cross_update_EXTI(&phase_B.zc_detector);
+  /* USER CODE END EXTI1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles EXTI line2 interrupt.
+  */
+void EXTI2_IRQHandler(void)
+{
+  /* USER CODE BEGIN EXTI2_IRQn 0 */
+
+  /* USER CODE END EXTI2_IRQn 0 */
+  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_2);
+  /* USER CODE BEGIN EXTI2_IRQn 1 */
+	zero_cross_update_EXTI(&phase_C.zc_detector);
+  /* USER CODE END EXTI2_IRQn 1 */
+}
+
 /* USER CODE BEGIN 1 */
 
 /* USER CODE END 1 */

mcu_project/upp/Core/Src/tim.c

@@ -24,8 +24,79 @@
 
 /* USER CODE END 0 */
 
+TIM_HandleTypeDef htim1;
 TIM_HandleTypeDef htim2;
 
+/* TIM1 init function */
+void MX_TIM1_Init(void)
+{
+
+  /* USER CODE BEGIN TIM1_Init 0 */
+
+  /* USER CODE END TIM1_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+  TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
+
+  /* USER CODE BEGIN TIM1_Init 1 */
+
+  /* USER CODE END TIM1_Init 1 */
+  htim1.Instance = TIM1;
+  htim1.Init.Prescaler = 72-1;
+  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim1.Init.Period = 20000;
+  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim1.Init.RepetitionCounter = 0;
+  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 10000;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
+  sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+  if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
+  sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
+  sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
+  sBreakDeadTimeConfig.DeadTime = 0;
+  sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
+  sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
+  sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
+  if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM1_Init 2 */
+
+  /* USER CODE END TIM1_Init 2 */
+  HAL_TIM_MspPostInit(&htim1);
+
+}
 /* TIM2 init function */
 void MX_TIM2_Init(void)
 {
@@ -70,7 +141,18 @@ void MX_TIM2_Init(void)
 void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
 {
 
-  if(tim_baseHandle->Instance==TIM2)
+  if(tim_baseHandle->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspInit 0 */
+
+  /* USER CODE END TIM1_MspInit 0 */
+    /* TIM1 clock enable */
+    __HAL_RCC_TIM1_CLK_ENABLE();
+  /* USER CODE BEGIN TIM1_MspInit 1 */
+
+  /* USER CODE END TIM1_MspInit 1 */
+  }
+  else if(tim_baseHandle->Instance==TIM2)
   {
   /* USER CODE BEGIN TIM2_MspInit 0 */
 
@@ -82,11 +164,47 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
   /* USER CODE END TIM2_MspInit 1 */
   }
 }
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(timHandle->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspPostInit 0 */
+
+  /* USER CODE END TIM1_MspPostInit 0 */
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**TIM1 GPIO Configuration
+    PA8     ------> TIM1_CH1
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_8;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM1_MspPostInit 1 */
+
+  /* USER CODE END TIM1_MspPostInit 1 */
+  }
+
+}
 
 void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
 {
 
-  if(tim_baseHandle->Instance==TIM2)
+  if(tim_baseHandle->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspDeInit 0 */
+
+  /* USER CODE END TIM1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM1_CLK_DISABLE();
+  /* USER CODE BEGIN TIM1_MspDeInit 1 */
+
+  /* USER CODE END TIM1_MspDeInit 1 */
+  }
+  else if(tim_baseHandle->Instance==TIM2)
   {
   /* USER CODE BEGIN TIM2_MspDeInit 0 */
 

mcu_project/upp/Core/upp/tiristor.c

@@ -136,6 +136,7 @@ void tiristor_angle_reset(TiristorControl_t *ctrl)
  */
 void tiristor_init(TiristorControl_t *ctrl, GPIO_TypeDef *gpiox, uint32_t gpio_pin)
 {
+    ctrl->open_time = 1;          // Сохраняем порт GPIO
     ctrl->gpiox = gpiox;          // Сохраняем порт GPIO
     ctrl->gpio_pin = gpio_pin;    // Сохраняем номер пина GPIO
     tiristor_angle_reset(ctrl);   // Сбрасываем угол открытия тиристора на начальное значение

mcu_project/upp/MDK-ARM/EventRecorderStub.scvd

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<component_viewer schemaVersion="0.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="Component_Viewer.xsd">
+
+<component name="EventRecorderStub" version="1.0.0"/>       <!--name and version of the component-->
+  <events>
+  </events>
+
+</component_viewer>

mcu_project/upp/MDK-ARM/upp.uvoptx

@@ -117,6 +117,26 @@
         <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGTARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name></Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGUARM</Key>
+          <Name>(105=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
           <Key>UL2CM3</Key>
@@ -125,27 +145,22 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>ST-LINKIII-KEIL_SWO</Key>
-          <Name>-U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL08000 -FP0($$Device:STM32F103C6$Flash\STM32F10x_128.FLM)</Name>
+          <Name>-U-O142 -O2254 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(1BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL08000 -FP0($$Device:STM32F103C6$Flash\STM32F10x_128.FLM) -WA0 -WE0 -WVCE4 -WS2710 -WM0 -WP2</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
-      <Breakpoint>
+      <Breakpoint/>
-        <Bp>
+      <WatchWindow1>
-          <Number>0</Number>
+        <Ww>
-          <Type>0</Type>
+          <count>0</count>
-          <LineNumber>62</LineNumber>
+          <WinNumber>1</WinNumber>
-          <EnabledFlag>1</EnabledFlag>
+          <ItemText>Upp</ItemText>
-          <Address>0</Address>
+        </Ww>
-          <ByteObject>0</ByteObject>
+        <Ww>
-          <HtxType>0</HtxType>
+          <count>1</count>
-          <ManyObjects>0</ManyObjects>
+          <WinNumber>1</WinNumber>
-          <SizeOfObject>0</SizeOfObject>
+          <ItemText>phase_A</ItemText>
-          <BreakByAccess>0</BreakByAccess>
+        </Ww>
-          <BreakIfRCount>0</BreakIfRCount>
+      </WatchWindow1>
-          <Filename>..\Core\upp\tiristor.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression></Expression>
-        </Bp>
-      </Breakpoint>
       <Tracepoint>
         <THDelay>0</THDelay>
       </Tracepoint>
@@ -188,9 +203,15 @@
       <pszMrulep></pszMrulep>
       <pSingCmdsp></pSingCmdsp>
       <pMultCmdsp></pMultCmdsp>
+      <SystemViewers>
+        <Entry>
+          <Name>System Viewer\TIM1</Name>
+          <WinId>35905</WinId>
+        </Entry>
+      </SystemViewers>
       <DebugDescription>
         <Enable>1</Enable>
-        <EnableFlashSeq>1</EnableFlashSeq>
+        <EnableFlashSeq>0</EnableFlashSeq>
         <EnableLog>0</EnableLog>
         <Protocol>2</Protocol>
         <DbgClock>10000000</DbgClock>

mcu_project/upp/MDK-ARM/upp.uvprojx

@@ -82,7 +82,7 @@
           </BeforeMake>
           <AfterMake>
             <RunUserProg1>0</RunUserProg1>
-            <RunUserProg2>0</RunUserProg2>
+            <RunUserProg2>1</RunUserProg2>
             <UserProg1Name></UserProg1Name>
             <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
@@ -315,7 +315,7 @@
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
-            <Optim>4</Optim>
+            <Optim>1</Optim>
             <oTime>0</oTime>
             <SplitLS>0</SplitLS>
             <OneElfS>1</OneElfS>
@@ -341,7 +341,7 @@
               <MiscControls></MiscControls>
               <Define>USE_HAL_DRIVER,STM32F103x6</Define>
               <Undefine></Undefine>
-              <IncludePath>../Core/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../Drivers/CMSIS/Include;..\Core\upp</IncludePath>
+              <IncludePath>../Core/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../Drivers/CMSIS/Include;../Core/upp</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>

mcu_project/upp/MDK-ARM/upp/stm32f1xx_it.d

@@ -30,4 +30,7 @@ upp/stm32f1xx_it.o: ..\Core\Src\stm32f1xx_it.c ..\Core\Inc\main.h \
   ..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h \
   ..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h \
   ..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_uart.h \
-  ..\Core\Inc\stm32f1xx_it.h
+  ..\Core\Inc\stm32f1xx_it.h ..\Core\upp\upp.h ..\Core\Inc\adc.h \
+  ..\Core\Inc\tim.h ..\Core\Inc\usart.h ..\Core\Inc\gpio.h \
+  ..\Core\upp\zero_cross.h ..\Core\upp\adc_filter.h \
+  ..\Core\upp\tiristor.h

mcu_project/upp/upp.ioc

@@ -9,7 +9,7 @@ CAD.formats=
 CAD.pinconfig=
 CAD.provider=
 File.Version=6
-GPIO.groupedBy=
+GPIO.groupedBy=Group By Peripherals
 KeepUserPlacement=false
 Mcu.CPN=STM32F103C6T6A
 Mcu.Family=STM32F1
@@ -17,23 +17,36 @@ Mcu.IP0=ADC1
 Mcu.IP1=NVIC
 Mcu.IP2=RCC
 Mcu.IP3=SYS
-Mcu.IP4=TIM2
+Mcu.IP4=TIM1
-Mcu.IP5=USART1
+Mcu.IP5=TIM2
-Mcu.IPNb=6
+Mcu.IP6=USART1
+Mcu.IPNb=7
 Mcu.Name=STM32F103C(4-6)Tx
 Mcu.Package=LQFP48
-Mcu.Pin0=PC14-OSC32_IN
+Mcu.Pin0=PC13-TAMPER-RTC
-Mcu.Pin1=PC15-OSC32_OUT
+Mcu.Pin1=PC14-OSC32_IN
-Mcu.Pin10=VP_TIM2_VS_ClockSourceINT
+Mcu.Pin10=PB1
-Mcu.Pin2=PD0-OSC_IN
+Mcu.Pin11=PB2
-Mcu.Pin3=PD1-OSC_OUT
+Mcu.Pin12=PB12
-Mcu.Pin4=PA0-WKUP
+Mcu.Pin13=PB13
-Mcu.Pin5=PA9
+Mcu.Pin14=PB14
-Mcu.Pin6=PA10
+Mcu.Pin15=PA8
-Mcu.Pin7=PA13
+Mcu.Pin16=PA9
-Mcu.Pin8=PA14
+Mcu.Pin17=PA10
-Mcu.Pin9=VP_SYS_VS_Systick
+Mcu.Pin18=PA13
-Mcu.PinsNb=11
+Mcu.Pin19=PA14
+Mcu.Pin2=PC15-OSC32_OUT
+Mcu.Pin20=VP_SYS_VS_Systick
+Mcu.Pin21=VP_TIM1_VS_ClockSourceINT
+Mcu.Pin22=VP_TIM2_VS_ClockSourceINT
+Mcu.Pin3=PD0-OSC_IN
+Mcu.Pin4=PD1-OSC_OUT
+Mcu.Pin5=PA0-WKUP
+Mcu.Pin6=PA5
+Mcu.Pin7=PA6
+Mcu.Pin8=PA7
+Mcu.Pin9=PB0
+Mcu.PinsNb=23
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F103C6Tx
@@ -41,6 +54,9 @@ MxCube.Version=6.12.1
 MxDb.Version=DB.6.0.121
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.EXTI0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.EXTI1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
+NVIC.EXTI2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
 NVIC.ForceEnableDMAVector=true
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
@@ -57,8 +73,35 @@ PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
+PA5.Locked=true
+PA5.Signal=GPIO_Output
+PA6.Locked=true
+PA6.Signal=GPIO_Output
+PA7.Locked=true
+PA7.Signal=GPIO_Output
+PA8.Signal=S_TIM1_CH1
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PB0.GPIOParameters=GPIO_ModeDefaultEXTI
+PB0.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PB0.Locked=true
+PB0.Signal=GPXTI0
+PB1.GPIOParameters=GPIO_ModeDefaultEXTI
+PB1.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PB1.Locked=true
+PB1.Signal=GPXTI1
+PB12.Locked=true
+PB12.Signal=GPIO_Output
+PB13.Locked=true
+PB13.Signal=GPIO_Output
+PB14.Locked=true
+PB14.Signal=GPIO_Output
+PB2.GPIOParameters=GPIO_ModeDefaultEXTI
+PB2.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PB2.Locked=true
+PB2.Signal=GPXTI2
+PC13-TAMPER-RTC.Locked=true
+PC13-TAMPER-RTC.Signal=GPIO_Output
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
 PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
@@ -98,7 +141,7 @@ ProjectManager.ToolChainLocation=
 ProjectManager.UAScriptAfterPath=
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_ADC1_Init-ADC1-false-HAL-true,4-MX_TIM2_Init-TIM2-false-HAL-true,5-MX_USART1_UART_Init-USART1-false-HAL-true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_ADC1_Init-ADC1-false-HAL-true,4-MX_TIM2_Init-TIM2-false-HAL-true,5-MX_USART1_UART_Init-USART1-false-HAL-true,6-MX_TIM1_Init-TIM1-false-HAL-true
 RCC.ADCFreqValue=12000000
 RCC.ADCPresc=RCC_ADCPCLK2_DIV6
 RCC.AHBFreq_Value=72000000
@@ -123,10 +166,27 @@ RCC.USBFreq_Value=72000000
 RCC.VCOOutput2Freq_Value=8000000
 SH.ADCx_IN0.0=ADC1_IN0,IN0
 SH.ADCx_IN0.ConfNb=1
+SH.GPXTI0.0=GPIO_EXTI0
+SH.GPXTI0.ConfNb=1
+SH.GPXTI1.0=GPIO_EXTI1
+SH.GPXTI1.ConfNb=1
+SH.GPXTI2.0=GPIO_EXTI2
+SH.GPXTI2.ConfNb=1
+SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1
+SH.S_TIM1_CH1.ConfNb=1
+TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+TIM1.IPParameters=Channel-PWM Generation1 CH1,Prescaler,Period,Pulse-PWM Generation1 CH1
+TIM1.Period=20000
+TIM1.Prescaler=72-1
+TIM1.Pulse-PWM\ Generation1\ CH1=10000
+TIM2.IPParameters=Prescaler
+TIM2.Prescaler=72-1
 USART1.IPParameters=VirtualMode
 USART1.VirtualMode=VM_ASYNC
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TIM1_VS_ClockSourceINT.Mode=Internal
+VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
 VP_TIM2_VS_ClockSourceINT.Mode=Internal
 VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
 board=custom