добавил второй проект для C8T6

2026-02-14 18:13:02 +03:00
parent 69ae4f8cf2
commit 8552d8ee90
2781 changed files with 1626381 additions and 41 deletions
--- a/john103C6T6NewVer/MDK-ARM/RTE/USB/USBD_Config_0.c.base@5.3.0
+++ b/john103C6T6NewVer/MDK-ARM/RTE/USB/USBD_Config_0.c.base@5.3.0
@@ -0,0 +1,127 @@
+/*------------------------------------------------------------------------------
+ * MDK Middleware - Component ::USB:Device
+ * Copyright (c) 2004-2023 Arm Limited (or its affiliates). All rights reserved.
+ *------------------------------------------------------------------------------
+ * Name:    USBD_Config_0.c
+ * Purpose: USB Device Configuration
+ * Rev.:    V5.3.0
+ *------------------------------------------------------------------------------
+ * Use the following configuration settings in the Device Class configuration
+ * files to assign a Device Class to this USB Device 0.
+ *
+ * Configuration Setting               Value
+ * ---------------------               -----
+ * Assign Device Class to USB Device # = 0
+ *----------------------------------------------------------------------------*/
+
+//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
+
+// <h>USB Device 0
+//   <o>Connect to hardware via Driver_USBD# <0-255>
+//   <i>Select driver control block for hardware interface.
+#define USBD0_PORT                      0
+
+//   <o.0>High-speed
+//   <i>Enable High-speed functionality (if device supports it).
+#define USBD0_HS                        0
+
+//   <h>Device Settings
+//   <i>These settings are used to create the Device Descriptor
+//     <o>Max Endpoint 0 Packet Size
+//     <i>Maximum packet size for Endpoint 0 (bMaxPacketSize0).
+//       <8=>8 Bytes <16=>16 Bytes <32=>32 Bytes <64=>64 Bytes
+#define USBD0_MAX_PACKET0               8
+
+//     <o.0..15>Vendor ID <0x0000-0xFFFF>
+//     <i>Vendor ID assigned by USB-IF (idVendor).
+#define USBD0_DEV_DESC_IDVENDOR         0xC251
+
+//     <o.0..15>Product ID <0x0000-0xFFFF>
+//     <i>Product ID assigned by manufacturer (idProduct).
+#define USBD0_DEV_DESC_IDPRODUCT        0x0000
+
+//     <o.0..15>Device Release Number <0x0000-0xFFFF>
+//     <i>Device Release Number in binary-coded decimal (bcdDevice)
+#define USBD0_DEV_DESC_BCDDEVICE        0x0100
+
+//   </h>
+
+//   <h>Configuration Settings
+//   <i>These settings are used to create the Configuration Descriptor.
+//     <o.6>Power
+//     <i>Default Power Setting (D6: of bmAttributes).
+//       <0=>Bus-powered
+//       <1=>Self-powered
+//     <o.5>Remote Wakeup
+//     <i>Configuration support for Remote Wakeup (D5: of bmAttributes).
+#define USBD0_CFG_DESC_BMATTRIBUTES     0x80
+
+//     <o.0..7>Maximum Power Consumption (in mA) <0-510><#/2>
+//     <i>Maximum Power Consumption of USB Device from bus in this
+//     <i>specific configuration when device is fully operational (bMaxPower).
+#define USBD0_CFG_DESC_BMAXPOWER        250
+
+//   </h>
+
+//   <h>String Settings
+//   <i>These settings are used to create the String Descriptor.
+//     <o.0..15>Language ID <0x0000-0xFCFF>
+//     <i>English (United States) = 0x0409.
+#define USBD0_STR_DESC_LANGID           0x0409
+
+//     <s.126>Manufacturer String
+//     <i>String Descriptor describing Manufacturer.
+#define USBD0_STR_DESC_MAN_RAW          "Keil Software"
+
+//     <s.126>Product String
+//     <i>String Descriptor describing Product.
+#define USBD0_STR_DESC_PROD_RAW         "Keil USB Device 0"
+
+//     <e.0>Serial Number String
+//     <i>Enable Serial Number String.
+//     <i>If disabled Serial Number String will not be assigned to USB Device.
+#define USBD0_STR_DESC_SER_EN           1
+
+//       <s.126>Default value
+//       <i>Default device's Serial Number String.
+#define USBD0_STR_DESC_SER_RAW          "0001A0000000"
+
+//       <o.0..7>Maximum Length (in characters) <0-126>
+//       <i>Specifies the maximum number of Serial Number String characters that can be set at run-time.
+//       <i>Maximum value is 126. Use value 0 to disable RAM allocation for string.
+#define USBD0_STR_DESC_SER_MAX_LEN      16
+
+//     </e>
+//   </h>
+
+//   <h>Microsoft OS Descriptors Settings
+//   <i>These settings are used to create the Microsoft OS Descriptors.
+//     <e.0>OS String
+//     <i>Enable creation of Microsoft OS String and Extended Compat ID OS Feature Descriptors.
+#define USBD0_OS_DESC_EN                1
+
+//       <o.0..7>Vendor Code <0x01-0xFF>
+//       <i>Specifies Vendor Code used to retrieve OS Feature Descriptors.
+#define USBD0_OS_DESC_VENDOR_CODE       0x01
+
+//     </e>
+//   </h>
+
+//   <o>Control Transfer Buffer Size <64-65536:64>
+//   <i>Specifies size of buffer used for Control Transfers.
+//   <i>It should be at least as big as maximum packet size for Endpoint 0.
+#define USBD0_EP0_BUF_SIZE              128
+
+//   <h>OS Resources Settings
+//   <i>These settings are used to optimize usage of OS resources.
+//     <o>Core Thread Stack Size <64-65536>
+#define USBD0_CORE_THREAD_STACK_SIZE    512
+
+//        Core Thread Priority
+#define USBD0_CORE_THREAD_PRIORITY      osPriorityAboveNormal
+
+//   </h>
+// </h>
+
+
+#include "usbd_config.h"