Aleksey/UKSS_ICE
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

init commit.

Browse Source 
Проект каким он достался от Димы.
This commit is contained in:
nelolik
2021-02-15 09:56:02 +03:00
commit b8a0477c5c
294 changed files with 72365 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

184
v120/DSP2833x_examples/spi_loopback/Example_2833xSpi_FFDLB.c Normal file
View File

@@ -0,0 +1,184 @@
// TI File $Revision: /main/9 $
// Checkin $Date: April 21, 2008 15:43:32 $
//###########################################################################
//
// FILE: Example_2833xSpi_FFDLB.c
//
// TITLE: DSP2833x Device Spi Digital Loop Back program.
//
// ASSUMPTIONS:
//
// This program requires the DSP2833x header files.
//
// This program uses the internal loop back test mode of the peripheral.
// Other then boot mode pin configuration, no other hardware configuration
// is required.
//
// As supplied, this project is configured for "boot to SARAM"
// operation. The 2833x Boot Mode table is shown below.
// For information on configuring the boot mode of an eZdsp,
// please refer to the documentation included with the eZdsp,
//
// $Boot_Table:
//
// GPIO87 GPIO86 GPIO85 GPIO84
// XA15 XA14 XA13 XA12
// PU PU PU PU
// ==========================================
// 1 1 1 1 Jump to Flash
// 1 1 1 0 SCI-A boot
// 1 1 0 1 SPI-A boot
// 1 1 0 0 I2C-A boot
// 1 0 1 1 eCAN-A boot
// 1 0 1 0 McBSP-A boot
// 1 0 0 1 Jump to XINTF x16
// 1 0 0 0 Jump to XINTF x32
// 0 1 1 1 Jump to OTP
// 0 1 1 0 Parallel GPIO I/O boot
// 0 1 0 1 Parallel XINTF boot
// 0 1 0 0 Jump to SARAM <- "boot to SARAM"
// 0 0 1 1 Branch to check boot mode
// 0 0 1 0 Boot to flash, bypass ADC cal
// 0 0 0 1 Boot to SARAM, bypass ADC cal
// 0 0 0 0 Boot to SCI-A, bypass ADC cal
// Boot_Table_End$
//
// DESCRIPTION:
//
// This program is a SPI example that uses the internal loopback of
// the peripheral. Interrupts are not used.
//
// A stream of data is sent and then compared to the recieved stream.
//
// The sent data looks like this:
// 0000 0001 0002 0003 0004 0005 0006 0007 .... FFFE FFFF
//
// This pattern is repeated forever.
//
// Watch Variables:
// sdata - sent data
// rdata - received data
//
////###########################################################################
// Original Author: S.S.
//
// $TI Release: DSP2833x/DSP2823x Header Files V1.20 $
// $Release Date: August 1, 2008 $
//###########################################################################
#include "DSP28x_Project.h" // Device Headerfile and Examples Include File
// Prototype statements for functions found within this file.
// interrupt void ISRTimer2(void);
void delay_loop(void);
void spi_xmit(Uint16 a);
void spi_fifo_init(void);
void spi_init(void);
void error(void);
void main(void)
{
Uint16 sdata; // send data
Uint16 rdata; // received data
// Step 1. Initialize System Control:
// PLL, WatchDog, enable Peripheral Clocks
// This example function is found in the DSP2833x_SysCtrl.c file.
InitSysCtrl();
// Step 2. Initalize GPIO:
// This example function is found in the DSP2833x_Gpio.c file and
// illustrates how to set the GPIO to it's default state.
// InitGpio(); // Skipped for this example
// Setup only the GP I/O only for SPI-A functionality
// This function is found in DSP2833x_Spi.c
InitSpiaGpio();
// Step 3. Clear all interrupts and initialize PIE vector table:
// Disable CPU interrupts
DINT;
// Initialize PIE control registers to their default state.
// The default state is all PIE interrupts disabled and flags
// are cleared.
// This function is found in the DSP2833x_PieCtrl.c file.
InitPieCtrl();
// Disable CPU interrupts and clear all CPU interrupt flags:
IER = 0x0000;
IFR = 0x0000;
// Initialize the PIE vector table with pointers to the shell Interrupt
// Service Routines (ISR).
// This will populate the entire table, even if the interrupt
// is not used in this example. This is useful for debug purposes.
// The shell ISR routines are found in DSP2833x_DefaultIsr.c.
// This function is found in DSP2833x_PieVect.c.
InitPieVectTable();
// Step 4. Initialize all the Device Peripherals:
// This function is found in DSP2833x_InitPeripherals.c
// InitPeripherals(); // Not required for this example
spi_fifo_init(); // Initialize the Spi FIFO
spi_init(); // init SPI
// Step 5. User specific code:
// Interrupts are not used in this example.
sdata = 0x0000;
for(;;)
{
// Transmit data
spi_xmit(sdata);
// Wait until data is received
while(SpiaRegs.SPIFFRX.bit.RXFFST !=1) { }
// Check against sent data
rdata = SpiaRegs.SPIRXBUF;
if(rdata != sdata) error();
sdata++;
}
}
// Step 7. Insert all local Interrupt Service Routines (ISRs) and functions here:
void delay_loop()
{
long i;
for (i = 0; i < 1000000; i++) {}
}
void error(void)
{
asm(" ESTOP0"); // Test failed!! Stop!
for (;;);
}
void spi_init()
{
SpiaRegs.SPICCR.all =0x000F; // Reset on, rising edge, 16-bit char bits
SpiaRegs.SPICTL.all =0x0006; // Enable master mode, normal phase,
// enable talk, and SPI int disabled.
SpiaRegs.SPIBRR =0x007F;
SpiaRegs.SPICCR.all =0x009F; // Relinquish SPI from Reset
SpiaRegs.SPIPRI.bit.FREE = 1; // Set so breakpoints don't disturb xmission
}
void spi_xmit(Uint16 a)
{
SpiaRegs.SPITXBUF=a;
}
void spi_fifo_init()
{
// Initialize SPI FIFO registers
SpiaRegs.SPIFFTX.all=0xE040;
SpiaRegs.SPIFFRX.all=0x204f;
SpiaRegs.SPIFFCT.all=0x0;
}
//===========================================================================
// No more.
//===========================================================================

40
v120/DSP2833x_examples/spi_loopback/Example_2833xSpi_FFDLB.gel Normal file
View File

@@ -0,0 +1,40 @@
/*
// TI File $Revision: /main/5 $
// Checkin $Date: August 9, 2007 17:22:51 $
//###########################################################################
//
// This .gel file can be used to help load and build the example project.
// It should be unloaded from Code Composer Studio before loading another
// project.
//
//###########################################################################
// $TI Release: DSP2833x/DSP2823x Header Files V1.20 $
// $Release Date: August 1, 2008 $
//###########################################################################
*/
menuitem "DSP2833x SPI loopback"
hotmenu Load_and_Build_Project()
{
GEL_ProjectLoad("Example_2833xSpi_FFDLB.pjt");
GEL_ProjectBuild("Example_2833xSpi_FFDLB.pjt");
Setup_WatchWindow();
}
hotmenu Load_Code()
{
GEL_Load(".\\debug\\Example_2833xSpi_FFDLB.out");
Setup_WatchWindow();
}
hotmenu Setup_WatchWindow()
{
GEL_WatchReset();
GEL_WatchAdd("sdata,x");
GEL_WatchAdd("rdata,x");
GEL_WatchAdd("SpiaRegs,x");
}

45
v120/DSP2833x_examples/spi_loopback/Example_2833xSpi_FFDLB.pjt Normal file
View File

@@ -0,0 +1,45 @@
; Code Composer Project File, Version 2.0 (do not modify or remove this line)
[Project Settings]
ProjectName="DSP2833x"
ProjectDir="C:\tidcs\c28\DSP2833x\v120\DSP2833x_examples\spi_loopback\"
ProjectType=Executable
CPUFamily=TMS320C28XX
Tool="Compiler"
Tool="DspBiosBuilder"
Tool="Linker"
Config="Debug"
Config="Release"
[Source Files]
Source="..\..\DSP2833x_common\source\DSP2833x_ADC_cal.asm"
Source="..\..\DSP2833x_common\source\DSP2833x_CodeStartBranch.asm"
Source="..\..\DSP2833x_common\source\DSP2833x_DefaultIsr.c"
Source="..\..\DSP2833x_common\source\DSP2833x_PieCtrl.c"
Source="..\..\DSP2833x_common\source\DSP2833x_PieVect.c"
Source="..\..\DSP2833x_common\source\DSP2833x_Spi.c"
Source="..\..\DSP2833x_common\source\DSP2833x_SysCtrl.c"
Source="..\..\DSP2833x_common\source\DSP2833x_usDelay.asm"
Source="..\..\DSP2833x_headers\source\DSP2833x_GlobalVariableDefs.c"
Source="Example_2833xSpi_FFDLB.c"
Source="..\..\DSP2833x_common\cmd\28335_RAM_lnk.cmd"
Source="..\..\DSP2833x_headers\cmd\DSP2833x_Headers_nonBIOS.cmd"
["Compiler" Settings: "Debug"]
Options=-g -q -pdr -as -fr"C:\tidcs\c28\DSP2833x\v120\DSP2833x_examples\spi_loopback\Debug" -fs"C:\tidcs\c28\DSP2833x\v120\DSP2833x_examples\spi_loopback\Debug" -i"..\..\DSP2833x_headers\include" -i"..\..\DSP2833x_common\include" -d"_DEBUG" -d"LARGE_MODEL" --float_support=fpu32 -ml -mt -v28
["Compiler" Settings: "Release"]
Options=-q -o3 -fr"C:\tidcs\c28\DSP2833x\v120\DSP2833x_examples\spi_loopback\Release" -d"LARGE_MODEL" -ml -v28
["DspBiosBuilder" Settings: "Debug"]
Options=-v28
["DspBiosBuilder" Settings: "Release"]
Options=-v28
["Linker" Settings: "Debug"]
Options=-q -c -ecode_start -m".\Debug\Example_2833xSpi_FFDLB.map" -o".\Debug\Example_2833xSpi_FFDLB.out" -stack0x380 -w -x -i"..\..\DSP2833x_headers\include" -l"rts2800_fpu32.lib"
["Linker" Settings: "Release"]
Options=-q -c -o".\Release\Example_2833xSpi_FFDLB.out" -x